FRONT SEAT ASSEMBLY(for Power Seat) DISASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The following procedure is for LHD vehicles.

  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE POSITION CONTROL ECU ASSEMBLY (w/ Seat Position Memory System)

    Click here

  2. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)

    Click here

  3. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)

    Click here

  4. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER


    1. B0084UE

      Disconnect the rubber band of the separate type front seatback cover.

  5. REMOVE FRONT SEAT FRONT CUSHION SHIELD


    1. B0086J6

      Remove the clip.

    2. B0089L8C01
      B00847Z Remove in this Direction

      Disengage the guide as shown in the illustration.

    3. B0087UTC01
      B00847Z Remove in this Direction

      Disengage the 2 claws as shown in the illustration.

    4. B00854I

      Disengage the 3 guides to remove the front seat front cushion shield.

  6. REMOVE FRONT SEAT CUSHION SHIELD (w/o Vertical Adjuster)


    1. B0088VV

      Disengage the 3 claws.

    2. B00877B

      Disengage the claw and 2 guides.

    3. B0085BQC01
      *a Protective Tape
      B00847Z Remove in this Direction

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw and slightly pull the front seat cushion shield as shown in the illustration.

    4. B0083RSC01
      B00847Z Remove in this Direction

      Disengage the guide as shown in the illustration.

    5. B0087FU

      Disconnect the front power seat switch connector to remove the front seat cushion shield.

  7. REMOVE FRONT SEAT INNER CUSHION SHIELD (w/o Vertical Adjuster)


    1. B00855F

      Disengage the 3 claws.

    2. B00889CC02
      B00847Z Remove in this Direction

      Disengage the 2 claws and 2 guides to remove the front seat inner cushion shield as shown in the illustration.

  8. REMOVE FRONT SEAT CUSHION SHIELD (w/ Vertical Adjuster)


    1. B00887X

      Disengage the 2 claws.

    2. B0089E1

      Disengage the claw and 2 guides.

    3. B0087BLC01
      *a Protective Tape
      B00847Z Remove in this Direction

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw and slightly pull the front seat cushion shield as shown in the illustration.

    4. B00883EC01
      B00847Z Remove in this Direction

      Disengage the guide as shown in the illustration.

    5. B0087GU

      Disconnect the front power seat switch connector to remove the front seat cushion shield.

  9. REMOVE FRONT SEAT INNER CUSHION SHIELD (w/ Vertical Adjuster)


    1. B0085U6

      Disengage the 2 claws.

    2. B0084ZFC01
      B00847Z Remove in this Direction

      Disengage the 2 claws and 2 guides to remove the front seat inner cushion shield as shown in the illustration.

  10. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. B0088UY

      Using a moulding remover, disengage the 4 claws to remove the slide and vertical power seat switch knob.

  11. REMOVE RECLINING POWER SEAT SWITCH KNOB


    1. B0085QX

      Using a moulding remover, disengage the 4 claws to remove the reclining power seat switch knob.

  12. REMOVE SEAT ADJUSTER SHIELD CLAMP BRACKET (w/ Vertical Adjuster)


    1. B0084YP

      Remove the 2 screws and seat adjuster shield clamp bracket from the front seat cushion shield.

  13. REMOVE FRONT POWER SEAT SWITCH

    Click here

  14. REMOVE LOWER NO. 3 SEAT TRACK SPACER (for LH Side)


    1. B0083XF

      w/ Rear Seat Belt Warning System:


      1. Disengage the claw and 2 guides to remove the lower No. 3 seat track spacer from the front seat cushion shield.

  15. REMOVE LOWER NO. 4 SEAT TRACK SPACER (for LH Side)


    1. B0087IG

      w/ Rear Seat Belt Warning System:


      1. Disengage the claw and 2 guides to remove the lower No. 4 seat track spacer from the front seat inner cushion shield.

  16. REMOVE LOWER NO. 2 SEAT TRACK SPACER (for RH Side)


    1. w/ Rear Seat Belt Warning System:

      Tech Tips

      Use the same procedure as for the Lower No. 4 Seat Track Spacer (for LH Side).

  17. REMOVE LOWER NO. 1 SEAT TRACK SPACER (for RH Side)


    1. w/ Rear Seat Belt Warning System:

      Tech Tips

      Use the same procedure as for the Lower No. 3 Seat Track Spacer (for LH Side).

  18. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY (w/o Front Seat Side Airbag)


    1. B0088GK

      Disengage the 2 hooks.

    2. B0085WD

      Disconnect the connector.

    3. Disengage the clamp.

    4. B00898O

      Remove the 4 bolts.

    5. Disengage the 4 guides to remove the separate type front seatback assembly from the separate type front seat cushion assembly.

  19. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY (w/ Front Seat Side Airbag)


    1. B0088GK

      Disengage the 2 hooks.

    2. B0086CK

      w/o Vertical Adjuster:


      1. Disengage the claw and 4 clamps to separate the front seat airbag assembly wire harness.

        Tech Tips

        Disengage the 4 clamps first.

    3. B0087XU

      w/ Vertical Adjuster:


      1. Disengage the claw and 4 clamps to separate the front seat airbag assembly wire harness.

        Tech Tips

        Disengage the 4 clamps first.

    4. B0085WD

      Disconnect the connector.

    5. Disengage the clamp.

    6. B008727

      w/ Seat Heater System:


      1. Disengage the clamp.

      2. Disconnect the front seatback heater assembly connector.

    7. B00898O

      Remove the 4 bolts.

    8. Disengage the 4 guides to remove the separate type front seatback assembly from the separate type front seat cushion assembly.

  20. REMOVE FRONT SEAT HEADREST SUPPORT


    1. B00844S

      Disengage the 3 hooks.

    2. B0088SP

      w/ Seat Heater System:


      1. Disengage the clamp.

    3. B0089N8

      Open the 2 fasteners.

    4. w/o Rear Seat Belt Warning System:


      1. B00870TC01
        B00847Z Remove in this Direction

        Disengage the hook as shown in the illustration.

      2. B0089IOC01
        *1 Seatback Cover Hook
        *a Pin

        Pull up the pin of the seatback cover hook as shown in the illustration and remove the seatback cover hook.

      3. B00850AC01
        *1 Seat Cover Hanger
        *a Bracket
        B00847Z Remove in this Direction

        Slide the bracket as shown in the illustration to disengage the hook and disconnect the bracket from the seat cover hanger.

    5. B00845R

      Disengage the 4 claws and remove the 2 front seat headrest supports.

  21. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    1. Remove the separate type front seatback cover with pad.

  22. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. Using a screwdriver, disengage the 9 claws and remove the separate type front seatback cover from the separate type front seatback pad as shown in the illustration.

      B0089G7C01
      *a Screwdriver - -
  23. REMOVE FRONT SEATBACK HEATER ASSEMBLY (w/ Seat Heater System)

    Click here

  24. REMOVE FRONT SEAT AIRBAG ASSEMBLY (w/ Front Seat Side Airbag)

    Click here

  25. REMOVE SEATBACK CLIMATE CONTROL BLOWER (w/ Climate Control Seat System)


    1. B0084CAC02
      *a Wire Harness Clamp
      *b Hook

      Disengage the wire harness clamp and disconnect the connector.

    2. Disengage the 2 claws and 2 hooks and remove the seatback climate control blower.

  26. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY (w/ Vertical Adjuster)

    Click here

  27. REMOVE FRONT SEATBACK SPRING SUB-ASSEMBLY (w/o Vertical Adjuster)


    1. B0088VU

      Disengage the 2 claws to separate the 2 front seatback edge protectors from the front seatback frame sub-assembly.

    2. B0087BFC01
      B00847Z Remove in this Direction

      Remove the front seatback spring sub-assembly from the front seatback frame sub-assembly as shown in the illustration.

  28. REMOVE FRONT SEATBACK EDGE PROTECTOR


    1. w/o Vertical Adjuster:


      1. Remove the 2 front seatback edge protectors from the front seatback spring sub-assembly.

    2. w/ Vertical Adjuster:


      1. Remove the 2 front seatback edge protectors from the lumbar support adjuster assembly.

  29. REMOVE FRONT NO. 2 SEATBACK HOOK


    1. B0083HH

      Remove the 2 front No. 2 seatback hooks from the front seatback frame sub-assembly.

  30. REMOVE FRONT SEAT NO. 2 WIRE


    1. Disconnect each connector and disengage each clamp to remove the front seat No. 2 wire.

  31. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. B0084S8C01
      B00847Z Remove in this Direction

      w/ Occupant Detection Sensor:


      1. Disengage the claw to separate the connector holder as shown in the illustration.

      2. B0086IPC01
        B00847Z Remove in this Direction

        Disengage the claw to remove the connector holder from the occupant detection sensor wire harness as shown in the illustration.

    2. B00890M

      w/ Seat Heater System:


      1. Disconnect the connector.

      2. Disengage the clamp.

    3. Disengage the 10 hooks and remove the separate type front seat cushion cover with pad from the separate type front seat cushion spring assembly.

      B0084SH
  32. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. Using a screwdriver, disengage the 14 claws and remove the separate type front seat cushion cover from the separate type front seat cushion pad as shown in the illustration.

      B008585C01
      *a Screwdriver - -
  33. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY (w/ Seat Heater System)

    Click here

  34. REMOVE SEAT CUSHION CLIMATE CONTROL BLOWER ASSEMBLY (w/ Climate Control Seat System)


    1. B00892H

      Disengage the wire harness clamp and disconnect the connector.

    2. B0085IS

      Remove the 2 bolts.

    3. Disengage the hook and remove the seat cushion climate control blower assembly.

  35. REMOVE LH SEAT RECLINING ADJUSTER INSIDE COVER LH (w/ Vertical Adjuster)


    1. B0085T9

      Disengage the claw.

    2. B0087R7

      Disengage the 4 claws to remove the LH seat reclining adjuster inside cover LH.

  36. REMOVE LH SEAT RECLINING ADJUSTER INSIDE COVER RH (w/ Vertical Adjuster)


    1. B0085PZ

      Disengage the 4 claws to remove the LH seat reclining adjuster inside cover RH.

  37. REMOVE RH SEAT RECLINING ADJUSTER INSIDE COVER LH (w/o Vertical Adjuster)


    1. B00888A

      Disengage the 4 claws to remove the RH seat reclining adjuster inside cover LH.

  38. REMOVE RH SEAT RECLINING ADJUSTER INSIDE COVER RH (w/o Vertical Adjuster)


    1. B0086GI

      Disengage the clamp and claw.

    2. B0089H5

      Disengage the 4 claws to remove the RH seat reclining adjuster inside cover RH.

  39. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (w/ Vertical Adjuster)


    1. B0084J5C01
      *a Hook
      *b Guide

      Disengage the hook.

    2. Disengage the claw and guide to remove the front seat lower cushion shield LH.

  40. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH (w/ Vertical Adjuster)


    1. B0088TVC01
      *a Hook
      *b Guide

      Disengage the hook.

    2. Disengage the claw and guide to remove the front seat lower cushion shield RH.

  41. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Seat Heater System)

    Click here

  42. REMOVE FRONT SEAT WIRE


    1. Disconnect each connector and disengage each clamp to remove the front seat wire.

  43. REMOVE SEAT SLIDE POSITION SENSOR PROTECTOR (w/ Occupant Classification System)


    1. B00862Y

      Disengage the clamp and disconnect the connector.

    2. B0085B4C01
      *a Pin
      *b Engagement Point
      B00847Z Disengage in this Direction
      B008776 Slide in this Direction

      Disengage the seat slide position sensor protector from the pin of the seat position airbag sensor as shown in the illustration.

    3. Slide the seat slide position sensor protector as shown in the illustration to remove it.

  44. REMOVE FRONT SEAT NO. 3 WIRE (w/ Occupant Classification System)


    1. B008723

      Disengage the claw to remove the front seat No. 3 wire.

  45. REMOVE FRONT SEAT CUSHION SPRING SUB-ASSEMBLY


    1. B0083Q7

      Disengage the 6 hooks to remove the front seat cushion spring sub-assembly from the front seat adjuster assembly.

  46. REMOVE FRONT SEAT CUSHION WIRE HARNESS HOLDER (w/o Vertical Adjuster)


    1. B0087E4

      Remove the 2 screws.

    2. Disengage the claw to remove the front seat cushion wire harness holder.

  47. REMOVE FRONT SEAT CUSHION WIRE HARNESS HOLDER (w/ Vertical Adjuster)


    1. B008532

      Remove the 2 screws.

    2. B0086WPC01
      B00847Z Remove in this Direction

      Disengage the 2 claws.

    3. Disengage the guide to remove the front seat cushion wire harness holder as shown in the illustration.

  48. REMOVE FRONT SEAT LOWER CUSHION SHIELD (w/ Vertical Adjuster)


    1. B0084O9

      Disengage the claw.

    2. B0084SUC01
      B00847Z Remove in this Direction

      Disengage the guide to remove the front seat lower cushion shield as shown in the illustration.

  49. REMOVE POWER SEAT LIFTER MOTOR ASSEMBLY (w/ Vertical Adjuster)


    1. Remove the power seat lifter motor assembly.


      1. B008471

        Remove the 3 nuts and front seat adjuster plate.

      2. B0088OC

        Remove the vertical adjuster spacer.

      3. B0084SB

        Remove the front seat vertical housing sub-assembly.

  50. REMOVE POWER SEAT TILT MOTOR ASSEMBLY (w/ Vertical Adjuster)


    1. B00893W

      Remove the 3 bolts and power seat tilt motor assembly.