DTC Code | DTC Name |
---|---|
C1AF0 | ICS Detection Area Adjustment Incomplete |
DESCRIPTION
When parking support brake detection area adjustment is incomplete, the clearance warning ECU assembly stores DTC C1AF0.
DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
---|---|---|---|
C1AF0 | ICS Detection Area Adjustment Incomplete | ICS detection area adjustment incomplete |
|
CAUTION / NOTICE / HINT
Note
After turning the switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.
After replacing an ultrasonic sensor or the clearance warning ECU assembly, perform the necessary procedures (adjustment, calibration, initialization or registration).
When continuing with the inspection, confirm that the necessary procedures (adjustment, calibration, initialization or registration) have been completed before proceeding.
PROCEDURE
PARKING SUPPORT BRAKE SYSTEM REGISTRATION
Perform parking support brake system registration.
Result | ||
---|---|---|
|
NEXT |
CHECK FOR DTC
Using the GTS, check for DTCs according to the prompts on the screen.
Clear the DTCs according to the screen on the GTS.
Recheck for DTCs.
Tech Tips
If DTC C1AF0 is still output after performing parking support brake system registration 3 times, replace the clearance warning ECU assembly.
Result | ||||||
---|---|---|---|---|---|---|
|
A |
REPLACE CLEARANCE WARNING ECU ASSEMBLY Click here |
B |
USE SIMULATION METHOD TO CHECK Click here |