PARKING SUPPORT BRAKE SYSTEM DTC CHECK / CLEAR


  1. CHECK DTC


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the parking support brake system on.

    4. Turn the GTS on.

    5. Enter the following menus: Body Electrical / IPA/ICS/Clearance Sonar / Trouble Codes.

    6. Check for DTCs.

      Click here


      Body Electrical > IPA/ICS/Clearance Sonar > Trouble Codes

      Note

      The clearance warning ECU assembly outputs DTCs for the following system. When DTCs other than those in Diagnostic Trouble Code Chart for the parking support alert system are output, refer to Diagnostic Trouble Code Chart for the relevant systems.

      System Proceed to
      Parking Support Alert System

      Click here

  2. CLEAR DTC


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the parking support brake system on.

    4. Turn the GTS on.

    5. Enter the following menus: Body Electrical / IPA/ICS/Clearance Sonar / Trouble Codes.

    6. Clear the DTCs.


      Body Electrical > IPA/ICS/Clearance Sonar > Clear DTCs