CAUTION / NOTICE / HINT
Tech Tips
Use the same procedures for LHD and RHD vehicles.
The procedures listed below are for LHD vehicles.
PROCEDURE
REMOVE UPPER RADIATOR SUPPORT SEAL
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH
REMOVE INNER NO. 1 INSTRUMENT PANEL BRACKET COVER LH
REMOVE INSTRUMENT SIDE PANEL LH
REMOVE NO. 1 SWITCH HOLE BASE
REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL
REMOVE HEATER SWITCH ASSEMBLY (w/ Viscous Heater)
Detach the 2 claws and remove the heater switch assembly.
REMOVE IDLE UP SWITCH (w/o Viscous Heater)
Detach the 2 claws and remove the idle up switch.