CAUTION / NOTICE / HINT
Tech Tips
Use the same procedure for RHD and LHD vehicles.
The following procedure is for an LHD vehicle.
PROCEDURE
INSTALL FRONT SEAT CUSHION AIRBAG ASSEMBLY RH
Install the front seat cushion airbag assembly RH with 3 new nuts.
Note
Do not reuse the nuts.
Make sure that the front seat adjuster assembly RH is not deformed. If it is deformed, replace it with a new one.
Engage the clamp.
Engage the claw and clamp.
Tech Tips
Engage the claw first.
INSTALL FRONT SEAT VERTICAL ADJUSTER ASSEMBLY RH (w/ Variable Seat Cushion System)
INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD RH (for Standard Seat Type)
INSTALL FRONT SEAT CUSHION PAD WITH COVER (for Sports Seat Type)
INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY RH
INSTALL FRONT SEAT INNER CUSHION SHIELD RH
INSTALL INNER NO. 1 FRONT SEAT CUSHION SHIELD RH (for Standard Seat Type)
INSTALL FRONT SEAT CUSHION SHIELD RH
Tech Tips
Use the same procedure as for the LH side.
for Standard Seat Type: Click here
for Sports Seat Type: Click here
INSTALL INNER NO. 1 FRONT SEAT CUSHION SHIELD RH (for Sports Seat Type)
CONNECT FRONT SEATBACK BOARD SUB-ASSEMBLY RH
INSTALL FRONT SEAT ASSEMBLY RH
PERFORM DIAGNOSTIC SYSTEM CHECK