FRONT SEAT ASSEMBLY (for Passenger Side Power Seat) INSTALLATION


  1. INSTALL FRONT SEAT ASSEMBLY


    1. A01CCXM

      Place the front seat assembly in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. A01CCND

      Connect the 2 connectors.

    3. Connect the cable to the negative (-) battery terminal.

      Note

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

    4. Temporarily install the front seat assembly with the 4 bolts.

    5. Operate the slide power seat switch knob and move the seat to the rearmost position.

    6. A01CDSZE01

      Tighten the 2 bolts on the front side of the seat.

      Torque:
      39 N*m  { 398 kgf*cm, 29 ft.*lbf }

      Tech Tips

      Tighten the bolts in the order indicated in the illustration.

    7. A01CEQ6

      Engage the 2 claws and guide to close the cover.

    8. A01CCED

      Engage the 2 claws and guide to close the cover.

    9. Operate the slide power seat switch knob and move the seat to the foremost position.

    10. A01CCQQE01

      Tighten the 2 bolts on the rear side of the seat.

      Torque:
      39 N*m  { 398 kgf*cm, 29 ft.*lbf }

      Tech Tips

      Tighten the bolts in the order indicated in the illustration.

  2. INSTALL FRONT SEAT HEADREST ASSEMBLY

  3. INSTALL FRONT SEAT LEG COVER LH


    1. A01CF94

      Engage the 6 claws and guide to install the front seat leg cover LH.

    2. A01CEXK

      Install the floor carpet.

  4. INSTALL NO. 3 FLOOR CARPET MOULDING


    1. A01CEGE

      Engage the 2 clips and install the 2 No. 3 floor carpet mouldings.

  5. INSTALL DOOR SCUFF PLATE ASSEMBLY LH

    Tech Tips

    Use the same procedure for the LH side and RH side Click here.

  6. INSTALL COWL SIDE TRIM BOARD RH (for LHD)


    1. A01CE66

      Engage the 2 guides, claw and the 2 clips to install the cowl side trim board RH.

    2. Install the clip(A).

  7. INSTALL COWL SIDE TRIM BOARD LH (for RHD)


    1. A01CBNG

      Engage the 2 guides, claw and clip to install the cowl side trim board LH.

    2. Install the clip(A).

  8. INSPECT SRS WARNING LIGHT


    1. Inspect the SRS warning light Click here.

  9. INSPECT FRONT SEAT ASSEMBLY


    1. Inspect the power seat operation Click here.

  10. INSPECT SEAT BELT WARNING SYSTEM


    1. Inspect the seat belt warning system Click here.