FUEL LID LOCK CONTROL CABLE ASSEMBLY (for LHD) INSTALLATION

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY


    1. Connect the cable to the clamps shown in the illustration to install the cable.

      A0159AW

  2. INSTALL FUEL FILLER OPENING LID LOCK RETAINER

    A0157M6

    1. Install the lock retainer and turn it clockwise as shown in the illustration.

    2. A015D80

      Install the cable and turn it clockwise as shown in the illustration.

  3. INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY


    1. A015ABU

      Connect the fuel lid lock control cable to the fuel lid lock open lever.

    2. Attach the 2 claws to install the fuel lid lock open lever.

  4. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH

    A015DJL

    Tech Tips

    When installing the front quarter trim panel, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.


    1. w/ Rear No. 2 Seat, except Face to Face Seat Type:


      1. w/o Rear Air Conditioning System:

        Connect the rear seat lock control lever cable.

      2. w/ Rear Air Conditioning System:

        Connect the thermistor connector and rear seat lock control lever cable.

      3. Attach the 16 clips and 2 claws to install the quarter trim panel.

      4. Install the clip and bolt.

        Torque:
        12 N*m  { 122 kgf*cm, 9 ft.*lbf }
        A0156CN

    2. w/o Rear No. 2 Seat or w/ Rear No. 2 Seat, for Face to Face Seat Type:


      1. Attach the 16 clips and 2 claws to install the quarter trim panel.

      2. Install the clip.

        A0157MJ

    3. w/ Tonneau Cover:


      1. Attach the 16 clips and 2 claws to install the quarter trim panel.

      2. Install the screw and clip.

        A0158OA
    4. A015C42

      w/ Rear No. 2 Seat, except Face to Face Seat Type:


      1. Install the rear No. 2 seat belt anchor with the bolt.

        Torque:
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }
      2. A015DRR

        Attach the 3 claws to install the cover.

    5. A015CPR

      Install the rear No. 1 seat belt anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    6. A0157CJ

      Attach the 3 claws to install the cover.

  5. INSTALL REAR SEAT COVER CAP (w/ Rear No. 2 Seat, except Face to Face Seat Type)

    A015E2E

    Tech Tips

    Use the same procedure to install the rear seat cover cap on the other side.


    1. Attach the 3 claws to install the rear seat cover cap.

  6. INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/ Tonneau Cover)

    A015DVZ

    Tech Tips

    Use the same procedure to install the tonneau cover holder cap on the other side.


    1. Attach the 2 claws to install the tonneau cover holder cap.

  7. INSTALL FRONT FLOOR CARPET ASSEMBLY


    1. A015CAS

      Open the tail gate and back door, insert the carpet into the cabin from the rear, and install it to the floor.

    2. Attach the 2 clips and 8 claws.

      A01589V

  8. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE

    A015BES

    1. Attach the 6 clips to install the support plate.

  9. INSTALL REAR CONSOLE BOX SUB-ASSEMBLY


    1. w/o Console Box Lid:

      Click here

    2. w/ Cool Box:

      Click here

    3. w/o Cool Box:

      Click here

  10. INSTALL REAR NO. 2 SEAT PROTECTOR


    1. A0156R3

      Attach the clip and 4 claws to install the protector.

      Tech Tips

      Use the same procedures to install the protector on the other side.

  11. INSTALL REAR NO. 1 SEAT PROTECTOR


    1. A015CJ8

      Attach the clip and 4 claws to install the protector.

      Tech Tips

      Use the same procedures to install the protector on the other side.

  12. INSTALL AIR DUCT GUIDE


    1. A015AAR

      Attach the claw to install the guide.

    2. Install the screw.

      Tech Tips

      Use the same procedures for both sides.

  13. INSTALL AIR DUCT PLUG


    1. A015CYQ

      Attach the 2 claws to install the plug.

      Tech Tips

      Use the same procedures for both sides.

  14. INSTALL AIR HEATER GUIDE


    1. A015ABA

      Install the guide with the 2 screws.

      Tech Tips

      Use the same procedures for both sides.

  15. INSTALL NO. 2 AIR DUCT PLUG


    1. A015CMV

      Attach the 4 claws to install the 2 plugs.

      Tech Tips

      Use the same procedures for both sides.

  16. INSTALL REAR DOOR SCUFF PLATE LH

    A015BJQ

    1. Attach the 3 claws and 4 clips to install the scuff plate.

    2. Install the screw.

  17. INSTALL REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedures described for the LH side.

  18. INSTALL REAR STEP COVER

    A0159DZ

    Tech Tips

    Use the same procedure to install the step cover on the other side.


    1. Attach the 2 claws to install the step cover.

  19. INSTALL COWL SIDE TRIM BOARD LH

    A0156SP

    1. Attach the 2 clips to install the cowl side trim board.

    2. Install the cap nut.

  20. INSTALL COWL SIDE TRIM BOARD RH

    A015D0K

    1. Attach the 2 clips to install the cowl side trim board.

    2. Install the cap nut.

  21. INSTALL FRONT DOOR SCUFF PLATE LH

    A0157IK

    1. Attach the 7 claws and 4 clips to install the scuff plate.

  22. INSTALL FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedures described for the LH side.

  23. INSTALL INSTRUMENT SIDE PANEL LH

    A0155HU

    1. Attach the 6 claws to install the instrument side panel.

  24. INSTALL INSTRUMENT SIDE PANEL RH (w/ Airbag Cut Off Switch)

    A01569W

    1. Connect the connector.

    2. Attach the 6 claws to install the instrument side panel.

  25. INSTALL INSTRUMENT SIDE PANEL RH (w/o Airbag Cut Off Switch)

    A015ASI

    1. Attach the 6 claws to install the instrument side panel.

  26. INSTALL REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Seat Type 40 Side)

    Click here

  27. INSTALL REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Seat Type 60 Side)

    Click here

  28. INSTALL REAR NO. 1 SEAT ASSEMBLY (for Bench Seat Type)

    Click here

  29. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)


    1. Install the tonneau cover assembly.

  30. INSTALL FRONT SEAT ASSEMBLY RH


    1. for Manual Seat:

      Click here

    2. for Power Seat:

      Click here

    3. for Bench Seat Type:

      Click here

  31. INSTALL FRONT SEAT ASSEMBLY LH


    1. for Manual Seat:

      Click here

    2. for Power Seat:

      Click here

  32. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  33. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.