DUCT TEMPERATURE SENSOR (w/ Heater) INSTALLATION
-
INSTALL DUCT TEMPERATURE SENSOR
-
Attach the 4 claws to install the 2 sensors.
-
-
INSTALL REAR NO. 6 AIR DUCT
-
Install the duct with the 5 screws.
-
Connect the 2 connectors.
-
-
INSTALL FRONT FLOOR CARPET ASSEMBLY
-
Install the floor carpet.
-
-
INSTALL REAR NO. 1 SEAT PROTECTOR
-
Attach the 10 claws to install the 2 seat protectors.
-
-
INSTALL REAR NO. 2 SEAT PROTECTOR
-
Attach the 10 claws to install the 2 seat protectors.
-
-
INSTALL REAR SEAT COVER CAP (w/ Rear No. 2 Seat)
-
w/ Sliding Roof:
-
w/o Sliding Roof:
-
-
INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH
-
w/ Sliding Roof:
-
w/o Sliding Roof:
-
-
INSTALL REAR SEAT COVER CAP (w/ Rear No. 2 Seat)
-
w/ Sliding Roof:
-
w/o Sliding Roof:
-
-
INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH
-
w/ Sliding Roof:
-
w/o Sliding Roof:
-
-
INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
-
Install the tonneau cover assembly.
-
-
INSTALL REAR FLOOR MAT REAR SUPPORT PLATE
-
w/ Sliding Roof:
-
w/o Sliding Roof:
-
-
INSTALL REAR DOOR SCUFF PLATE LH
-
w/ Sliding Roof:
-
w/o Sliding Roof:
-
-
INSTALL REAR DOOR SCUFF PLATE RH
-
w/ Sliding Roof:
-
w/o Sliding Roof:
-
-
INSTALL REAR NO. 2 SEAT ASSEMBLY LH
-
for Face to Face Seat Type:
-
except Face to Face Seat Type:
-
-
INSTALL REAR NO. 2 SEAT ASSEMBLY RH
-
for Face to Face Seat Type:
-
except Face to Face Seat Type:
-
-
INSTALL REAR NO. 1 SEAT ASSEMBLY LH
-
for 60/40 Split Seat Type 40 Side:
-
for 60/40 Split Seat Type 60 Side:
-
-
INSTALL REAR NO. 1 SEAT ASSEMBLY RH
-
for 60/40 Split Seat Type 40 Side:
-
for 60/40 Split Seat Type 60 Side:
-
-
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
-
CHECK SRS WARNING LIGHT