Click here

REAR SUNSHADE SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

Click here
Click here
DTC Code DTC Name
  HOW TO PROCEED WITH TROUBLESHOOTING
Click here

CAUTION / NOTICE / HINT

Tip:
  • Use this procedure to troubleshoot the rear sunshade system.

  • *: Use the GTS.

Click here

PROCEDURE


  1. Click here

    VEHICLE BROUGHT TO WORKSHOP

    Result
    Proceed to
    NEXT

  2. Click here

    CUSTOMER PROBLEM ANALYSIS


    1. Interview the customer to confirm the trouble (Click here).

      Result
      Proceed to
      NEXT

  3. Click here

    INSPECT AUXILIARY BATTERY VOLTAGE


    1. Measure the auxiliary battery voltage with the power switch off.

      Standard Voltage
      11 to 14 V

      If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding to the next step.

      Result
      Result
      NEXT

  4. Click here

    INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*


    1. Using the GTS, check if the CAN communication system is functioning normally (Click here).

      Result
      Result Proceed to
      DTC is not output A
      DTC is output B

  5. Click here

    CHECK COMBINATION METER ASSEMBLY


    1. Check that the operation of the shift indicator on the combination meter assembly.

      OK
      The shift indicator on the combination meter assembly operates normally.
      Result
      Proceed to
      OK
      NG

  6. Click here

    PROBLEM SYMPTOMS TABLE


    1. Refer to Problem Symptoms Table (Click here).

      Result
      Result Proceed to
      Fault not listed in problem symptoms table A
      Fault listed in problem symptoms table B

  7. Click here

    OVERALL ANALYSIS AND TROUBLESHOOTING*


    1. Terminals of ECU (Click here)

    2. Operation Check (Click here)

    3. Data List / Active Test (Click here)

      Result
      Result
      NEXT

  8. Click here

    REPAIR OR REPLACE

    Result
    Result
    NEXT

  9. Click here

    CONFIRMATION TEST

    Result
    Result
    NEXT

    • NEXT

      END