ECUS OR SENSORS WHICH COMMUNICATE THROUGH CAN COMMUNICATION SYSTEM (for LHD)
V Bus
Combination meter assembly
Main body ECU (multiplex network body ECU)
Steering sensor
Power management control ECU
Brake booster with master cylinder assembly (skid control ECU)
Power steering ECU with motor assembly
Airbag sensor assembly
Air conditioning amplifier assembly
ECM
Certification ECU (smart key ECU assembly)
Multi-media module receiver assembly*1
Radio receiver assembly*9
Clearance warning ECU assembly
Telematics transceiver*10
Sub Bus 1
Main body ECU (multiplex network body ECU)
Multiplex tilt and telescopic ECU*2
Outer mirror control ECU assembly LH*2
Outer mirror control ECU assembly RH*2
Front power seat switch LH*2
Front power seat switch RH*3
Luggage closer motor assembly*4
Sub Bus 11*7
Power management control ECU
Seat belt control ECU
Driving support ECU assembly
Blind spot monitor sensor LH*5
Sub Bus 11*8
Power management control ECU
Lane departure warning camera*6
Blind spot monitor sensor LH*5
Sub Bus 13*7
Driving support ECU assembly
Lane departure warning camera*6
Millimeter wave radar sensor assembly
Sub Bus 15
ECM
Power management control ECU
Brake booster with master cylinder assembly (skid control ECU)
*1: for Navigation Receiver Type
*2: w/ Seat Position Memory System (for Driver Side)
*3: w/ Seat Position Memory System (for Front Passenger Side)
*4: w/ Power Trunk Lid System
*5: w/ Blind Spot Monitor System
*6: w/ Lane Departure Alert System
*7: w/ Dynamic Radar Cruise Control System
*8: w/o Dynamic Radar Cruise Control System
*9: for Radio and Display Type
*10: w/ Manual (SOS) Switch
ECUS OR SENSORS WHICH COMMUNICATE THROUGH CAN COMMUNICATION SYSTEM (for RHD)
V Bus
Combination meter assembly
Main body ECU (multiplex network body ECU)
Steering sensor
Power management control ECU
Brake booster with master cylinder assembly (skid control ECU)
Power steering ECU with motor assembly
Airbag sensor assembly
Air conditioning amplifier assembly
ECM
Certification ECU (smart key ECU assembly)
Multi-media module receiver assembly*1
Radio receiver assembly*7
Clearance warning ECU assembly
Sub Bus 1
Main body ECU (multiplex network body ECU)
Multiplex tilt and telescopic ECU*2
Outer mirror control ECU assembly LH
Outer mirror control ECU assembly RH
Front power seat switch LH*3
Front power seat switch RH
Luggage closer motor assembly*4
Rear television camera assembly*8
Sub Bus 11
Power management control ECU
Blind spot monitor sensor LH*5
Seat belt control ECU*6
Driving support ECU assembly*6
Sub Bus 13*6
Driving support ECU assembly
Millimeter wave radar sensor assembly
Sub Bus 15
ECM
Power management control ECU
Brake booster with master cylinder assembly (skid control ECU)
*1: for Navigation Receiver Type
*2: w/ Power Tilt and Power Telescopic Steering Column System
*3: w/ Seat Position Memory System (for Front Passenger Side)
*4: w/ Power Trunk Lid System
*5: w/ Blind Spot Monitor System
*6: w/ Dynamic Radar Cruise Control System
*7: for Radio and Display Type
*8: for Radio and Display Type (w/ Parking Assist Monitor System without Parallel Parking Assist Function)
CHECK FOR INSTALLED SYSTEMS (ECUS AND SENSORS) THAT ADOPT CAN COMMUNICATION
The systems (ECUs and sensors) that adopt CAN communication vary depending on the vehicle and optional equipment. Check which systems (ECUs and sensors) are installed on the vehicle.
The names of ECUs and sensors shown on the GTS display may differ from those shown in the DTC Table by ECU section.
ECU/Sensor Name | GTS Display | Applicability |
---|---|---|
Combination meter assembly | Combination Meter | Installed on all vehicles |
Main body ECU (multiplex network body ECU) | Main Body | Installed on all vehicles |
Steering sensor | Spiral cable (Steering Angle Sensor) | Installed on all vehicles |
Power management control ECU |
|
Installed on all vehicles |
Brake booster with master cylinder assembly (skid control ECU) |
Skid Control (ABS/VSC/TRAC) | Installed on all vehicles |
Power steering ECU with motor assembly | Power Steering (EPS) | Installed on all vehicles |
Airbag sensor assembly | Airbag | Installed on all vehicles |
Air conditioning amplifier assembly | Air Conditioning Amplifier | Installed on all vehicles |
ECM | ECM (Engine) | Installed on all vehicles |
Certification ECU (smart key ECU assembly) | Certification (Smart) | Installed on all vehicles |
Clearance warning ECU assembly | Clearance Warning (Clearance Sonar1) | Installed on all vehicles |
Multi-media module receiver assembly | Display and Navigation (AVN1) | Vehicles with navigation receiver |
Radio receiver assembly | Display and Navigation (AVN1) | Vehicles with radio and display |
Telematics transceiver | DCM | Vehicles with manual (SOS) switch |
Multiplex tilt and telescopic ECU | Multiplex Tilt and Telescopic |
|
Outer mirror control ECU assembly LH | Front Door LH/L-Mirror (FL-Door2/L-Miror) | Vehicles with seat position memory system |
Outer mirror control ECU assembly RH | Front Door RH/R-Mirror (FR-Door2/R-Miror) | Vehicles with seat position memory system |
|
D-Seat | Vehicles with seat position memory system |
|
P-Seat | Vehicles with seat position memory system |
Luggage closer motor assembly | Back Door | Vehicles with power trunk lid system |
Rear television camera assembly | Parking Assist Monitor System3 | Vehicles with radio and display (w/ Parking Assist Monitor System without Parallel Parking Assist Function) |
Seat belt control ECU | Seat Belt Control (Pre-Crash) | Vehicles with dynamic radar cruise control system |
Driving support ECU assembly | Driving Support (Cruise Control-ACC) | Vehicles with dynamic radar cruise control system |
Blind spot monitor sensor LH | Blind Spot Monitor Master | Vehicles with blind spot monitor system |
Lane departure warning camera (for LHD) | Front Camera Module | Vehicles with lane departure alert system |
Millimeter wave radar sensor assembly | - | Vehicles with dynamic radar cruise control system |
CAN BUS CHECK
The ECUs and sensors that are properly connected to the CAN communication system can be displayed using the GTS.
Using the GTS, select CAN Bus Check screen.
It may be possible to select buses that do not have ECUs or sensors from the bus selection pull-down menu. This is not a malfunction. (This occurs when optional devices are not on a sub bus that is monitored by a gateway function equipped ECU.)
In the bus selection pull down menu, all buses applicable to the model are displayed (e.g. LIN communication buses are also displayed). Therefore, refer to the wiring diagrams to check the names of sub buses for CAN communication (Click here).
Different connection statuses are indicated by the background color of ECUs and sensors that are displayed.
Bus Type | Background Color | Connection Status |
---|---|---|
V Bus | White | Communication has been normal since the start of the CAN bus check. |
Yellow | Communication stop occurred at least once since the start of the CAN bus check, but communication is currently occurring (unstable communication). | |
Red | Communication was established at least once since the start of the CAN bus check, but communication is currently not occurring (unstable communication). | |
Not displayed | Communication stop has continued since the start of the CAN bus check.*1 | |
Sub bus (gateway function equipped ECU that does not have history of connected ECUs)*2 |
White | Communication has been normal since the start of the CAN bus check. |
Yellow | Communication stop occurred at least once since the start of the CAN bus check, but communication is currently occurring (unstable communication). | |
Red | Communication was established at least once since the start of the CAN bus check, but communication is currently not occurring (unstable communication). | |
Not displayed | Communication stop has continued since the start of the CAN bus check.*1 | |
Sub bus (gateway function equipped ECU that has history of connected ECUs)*3 |
White | Communication has been normal since the start of the CAN bus check. |
Yellow | Communication stop occurred at least once since the start of the CAN bus check, but communication is currently occurring (unstable communication). | |
Red | Currently not communicating (either of the following):
|
|
Not displayed | Either of the following:
|
Gateway function equipped ECUs relay signals between the ECUs connected to the different buses.
*1: ECUs that are present in the vehicle but are not displayed on the CAN Bus Check screen.
*2: Gateway function equipped ECU that does not memorize the sub bus ECUs that are connected to it.
*3: Gateway function equipped ECU that memorizes the sub bus ECUs that are connected to it.
If none of the connected ECUs are displayed, or there is no response from the vehicle to the GTS, check the DLC3 branch and the V bus main bus lines for a malfunction.
Observe the connection response screen for approximately 2 minutes to check for a change in connection status of the connected ECUs and sensors.
If an open occurs in one of the lines of a CAN branch (except DLC3), output from the other branch line (the line that is not open) will be unstable and it may interfere with the response (display) of other ECUs and sensors.
If the connection status changes during the inspection, repair the open in the branch line of the ECU or sensor that does not respond (is not detected) and then perform the CAN bus check again.
HOW TO INTERPRET CAN BUS CHECK SCREEN
When a communication stop is currently occurring, the probable malfunctioning part can be determined from the CAN bus check and by using the following methods.
The following CAN bus wiring diagram is provided only as an example. This wiring diagram is different from the actual wiring diagram for this vehicle.
When a communication stop is currently occurring, it is easier to determine the probable malfunctioning part from the CAN bus check rather than from communication DTCs.
Wait for approximately 2 minutes after turning the power switch on (IG) (or simulate the driving conditions that enable the malfunction to be reproduced) and select the CAN bus check. Then observe the communication status of each ECU on the screen.
If a communication error of only 1 ECU or sensor is indicated on the CAN Bus Check screen, a communication stop of the ECU or sensor is suspected.
Example: Open in both CAN branch lines of ECU B on the V bus
*a | V Bus | *b | Sub Bus |
*c | Terminating Resistor | *d | Location of Malfunction |
*e | Not displayed or background color changes to red or yellow | *f | CAN Bus Check Screen |
When there are communication stops, ECUs are present in the vehicle even though they are not displayed on the CAN Bus Check screen.
If communication errors for multiple ECUs or sensors are indicated on the CAN Bus Check screen, then a communication stop of the ECU or sensor that shows a more serious communication stop (an ECU or a sensor which is not displayed) is suspected.
Example: Open in a CAN branch line for ECU D on the V bus
*a | Background color periodically changes to yellow or red |
*b | Not displayed or background color is yellow or red |
*c | Not displayed |
Bus Type | Background Color | Connection Status |
---|---|---|
V Bus | White | Communication has been normal since the start of the CAN bus check. |
Yellow | Communication stop occurred at least once since the start of the CAN bus check, but communication is currently occurring (unstable communication). | |
Red | Communication was established at least once since the start of the CAN bus check, but communication is currently not occurring (unstable communication). | |
Not displayed | Communication stop has continued since the start of the CAN bus check.*1 | |
Sub bus (gateway function equipped ECU that does not have history of connected ECUs)*2 |
White | Communication has been normal since the start of the CAN bus check. |
Yellow | Communication stop occurred at least once since the start of the CAN bus check, but communication is currently occurring (unstable communication). | |
Red | Communication was established at least once since the start of the CAN bus check, but communication is currently not occurring (unstable communication). | |
Not displayed | Communication stop has continued since the start of the CAN bus check.*1 | |
Sub bus (gateway function equipped ECU that has history of connected ECUs)*3 |
White | Communication has been normal since the start of the CAN bus check. |
Yellow | Communication stop occurred at least once since the start of the CAN bus check, but communication is currently occurring (unstable communication). | |
Red | Currently not communicating (either of the following):
|
|
Not displayed | Either of the following:
|
Gateway function equipped ECUs relay signals between the ECUs connected to the different buses.
*1: ECUs that are present in the vehicle but are not displayed on the CAN Bus Check screen.
*2: Gateway function equipped ECU that does not memorize the sub bus ECUs that are connected to it.
*3: Gateway function equipped ECU that memorizes the sub bus ECUs that are connected to it.
The example of the CAN Bus Check screen in the illustration shows the result of electrical noise on the CAN bus which is caused by an open in a CAN branch line of ECU D (output from the other branch line is unstable) and the communication of ECU C is also unstable. In addition, in this example, ECU C is equipped with a gateway function. Therefore, communication is also unstable between the sub bus ECUs of ECU C and the V bus.
The example in the illustration shows that ECU D is not displayed on the CAN Bus Check screen. This indicates a more significant communication stop. In this case, a communication stop of ECU D is suspected.
If a communication error is indicated on both the V bus and sub bus on the CAN Bus Check screen, suspect any communication stop displayed for the V bus first.
Example: Open in both CAN branch lines of ECU C on the V bus
*a | Not displayed or background color changes to red |
In the CAN bus check, it is possible to confirm the communication status of ECUs connected to the V bus after connecting the GTS to the DLC3. As for sub buses, it is possible to confirm which sub bus connected ECUs can communicate with a gateway function equipped ECU on the V bus.
If a gateway function equipped ECU has a communication error, ECUs connected to the gateway function equipped ECU are also affected, and communication stops will be indicated.
The CAN Bus Check screen in the illustration shows that ECU C has a gateway function and a communication stop in ECU C is suspected.
If the CAN Bus Check screen indicates a communication stop only in the sub bus, a communication stop in the sub bus is suspected.
Example: Open in both CAN branch lines of ECU G on the sub bus
*a | Background color changes to red |
A communication error in a sub bus does not affect the V bus or other buses.
When a gateway function equipped ECU has memorized the ECUs that are connected to the sub bus, if any of the ECUs connected to the gateway function equipped ECU has a communication error, the background color changes to yellow or red. (The displayed name will not disappear.)
If both of the V bus main bus lines are open, ECUs or sensors that are located farther away from the DLC3 than the open part will be displayed as a communication stop on the CAN Bus Check screen.
(In this case, ECU A and B are not displayed or their background color changes to red.)
*a | V Bus | *b | Sub Bus |
*c | Terminating Resistor | *d | Location of Malfunction |
*e | Not displayed or background color is red | *f | CAN Bus Check Screen |
If a communication error occurs in an ECU, it is not displayed on the CAN Bus Check screen even though the ECU is present.
If both of the sub bus main bus lines are open, ECUs that are located farther away from the gateway function equipped ECU than the open part will be displayed as a communication stop on the CAN Bus Check screen.
(In this case, ECU I and J are not displayed or their background color changes to red.)
*a | V Bus | *b | Sub Bus |
*c | Terminating Resistor | *d | Location of Malfunction |
*e | Not displayed or background color is red | *f | CAN Bus Check Screen |
*g | Gateway Function Equipped ECU | - | - |
When any of the following malfunctions occur, CAN communication cannot be established and almost all ECUs and sensors on the bus show a communication error on the CAN Bus Check screen.
*a | When any of the following malfunctions occur on the V bus |
*b | When any of the following malfunctions occur on a sub bus |
*c | Not displayed |
Short between CAN lines (CANH and CANL) |
Short between a CAN line (CANH or CANL) and +B |
Short between a CAN line (CANH or CANL) and ground |
Open in a CAN main bus line |
When a malfunction occurs on the V bus, almost all ECUs and sensors on the V bus and sub bus indicate a communication error (almost all ECUs are not displayed). As communication with the gateway function equipped ECU that is connected to the V bus stops, communication from the ECUs connected to the sub bus that is monitored by the gateway function equipped ECU also stops (these ECUs are not displayed).
When a malfunction occurs in a sub bus, almost all ECUs connected to the sub bus indicate a communication error.
A communication error in a sub bus does not affect the V bus or other buses.
The malfunctioning part can be determined by checking for a short circuit between CAN bus lines or between a CAN bus line and ground or +B short using an electrical tester.
HOW TO INTERPRET COMMUNICATION DTCS (DTCS THAT START WITH U)
If a CAN communication error cannot be reproduced, determine the suspected malfunctioning part using the DTCs stored in ECUs that are connected to the CAN buses by following the procedure below.
Communication DTCs (DTCs that start with U) indicate a communication error between the ECU that stores the DTC and the ECU that is indicated by the DTC.
If multiple ECUs store a communication DTC for a particular ECU, a communication stop of the ECU is suspected.
*a | Items to be Checked | - | - |
This DTC table is from another model, and is only used here to show an example of DTCs that are output when there is an open in a CAN branch line for the main body ECU. This table does not show DTCs applicable to this vehicle.
Even though a DTC title may indicate a communication error with a specific ECU, the ECU name used in the DTC name on the GTS may differ depending on the ECU that stores the DTC. (Regarding output DTCs, refer to step 6 and the DTC chart for each ECU.)
As multiple ECUs indicate a communication stop with the main body ECU, the possibility of a communication stop of the main body ECU is high.
If almost all of the communication DTCs of an ECU are stored, a communication stop of the ECU is suspected.
*a | Items to be Checked | - | - |
This DTC table is from another model, and is only used here to show an example of DTCs that are output when there is an open in a CAN branch line for the main body ECU. This table does not show DTCs applicable to this vehicle.
If almost all of the DTCs of the main body ECU are stored, the possibility of a communication stop of the main body ECU is high.
When a CAN communication error occurs, many DTCs are output. DTCs other than communication error DTCs (such as DTCs that start with C or B) and communication DTCs for the ABS system are important DTCs, however it may be easier to determine the malfunctioning part by examining the overall situation without considering these DTCs.
To help determine the part of the sub bus that has a communication error, prioritize the communication stop DTCs stored in the gateway function equipped ECU.
*a | Items to be Checked | *b | ECM |
*c | Gateway Function Equipped ECU | *d | Location of Malfunction |
*e | V Bus | *f | Sub Bus |
This DTC table is from another model, and is only used here to show the ECUs connected to both a V bus and a sub bus. It shows DTCs output when there is an open in the main bus lines for the ECM on the sub bus. This table does not show DTCs applicable to this vehicle.
As gateway function equipped ECUs (sub bus monitor ECU) monitor signals from all ECUs that are connected to sub buses, gateway function equipped ECUs can detect ECUs with a communication stop more accurately.
When there is a communication stop for the gateway function equipped ECU (gateway), communication with ECUs connected to other buses such as the V bus stops. Therefore, communication DTCs for ECUs connected to other buses are also stored.
When any of the following malfunctions occurs, many DTCs are likely to be output from many ECUs. Because of this, it may be difficult to determine the probable malfunctioning part.
Short between CAN lines (CANH and CANL)
Short between a CAN line (CANH or CANL) and ground
Short between a CAN line (CANH or CANL) and +B
Open in a CAN branch line (CANH or CANL) of an ECU or sensor
Open in a CAN main bus line (CANH or CANL) between 2 ECUs that have a terminating resistor
DTC TABLE BY ECU
If system function temporarily returns to normal, DTCs may not be output again even though the following DTC check procedures are used.
In the CAN communication system, the CAN communication DTCs of each ECU can be displayed using the GTS.
If CAN communication system DTCs are output, the malfunction cannot be determined only by the DTCs. Perform troubleshooting according to How to Proceed with Troubleshooting (Click here).
Power Management Control ECU / GTS Display "Hybrid Control"
This ECU uses the CAN communication system for DTC communication.
*1: Refer to Hybrid Control System (Click here).
*2: Refer to Hybrid Battery System (Click here).
DTC | Detection Item | DTC Detection Condition | DTC Detection Pre-condition | DTC Check Procedure | Warning Indication in Meter | DTC Storage Method |
---|---|---|---|---|---|---|
U0100 | Lost Communication with ECM/PCM "A" | The power management control ECU (HV CPU) does not receive data from the ECM for 0.576 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 1.576 seconds. |
|
DTC is stored until it is cleared using the GTS. |
U0110*1 | Lost Communication with Drive Motor Control Module "A" | Either condition is met:
|
Both conditions are met:
|
Turn the power switch on (IG) and wait at least 0.21 seconds. | Master warning light illuminates. | DTC is stored until it is cleared using the GTS. |
U0129 | Lost Communication with Brake System Control Module | The power management control ECU (HV CPU) does not receive data from the brake booster with master cylinder assembly (skid control ECU) for 2.34 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 4.44 seconds. | Master warning light illuminates. | DTC is stored until it is cleared using the GTS. |
U0140 | Communication Error from Body ECU to HV ECU | The power management control ECU (HV CPU) does not receive data from the main body ECU (multiplex network body ECU) for 3.6 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 4.6 seconds. | Master warning light illuminates. | DTC is stored until it is cleared using the GTS. |
U0151 | Communication Error from Airbag ECU to HV ECU | The power management control ECU (HV CPU) does not receive data from the airbag sensor assembly for 3.6 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 4.6 seconds. | Master warning light illuminates. | DTC is stored until it is cleared using the GTS. |
U0164 | Communication Error from A/C ECU to HV ECU | The power management control ECU (HV CPU) does not receive data from the air conditioning amplifier assembly for 10.6 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 11.6 seconds. | - | DTC is stored until it is cleared using the GTS. |
U029A*2 | Lost Communication with Hybrid Battery Pack Sensor Module | The power management control ECU (HV CPU) does not receive data from the battery smart unit for 0.5 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 1 second. |
|
DTC is stored until it is cleared using the GTS. |
U0424*1 | Invalid Data Received from HVAC Control Module | The power management control ECU (HV CPU) receives an abnormal operation value command from the air conditioning amplifier assembly for 3 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 3.5 seconds. | - | DTC is stored until it is cleared using the GTS. |
U1104 | Lost Communication with Driving Support ECU | The power management control ECU (HV CPU) does not receive data from the driving support ECU assembly for 0.92 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 1.92 seconds. |
|
DTC is stored until it is cleared using the GTS. |
U1107 | Lost Communication with Power Management Module | The power management control ECU (HV CPU) does not receive data from the power management control ECU (power management CPU) for 3.6 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 4.6 seconds. | Master warning light illuminates. | DTC is stored until it is cleared using the GTS. |
Power Management Control ECU / GTS Display "Power Source Control"
This ECU uses the CAN communication system for DTC communication.
*1: Refer to Smart Entry and Start System (for Start Function) (Click here).
DTC | Detection Item | DTC Detection Condition | DTC Detection Pre-condition | DTC Check Procedure | Warning Indication in Meter | DTC Storage Method |
---|---|---|---|---|---|---|
U0140 | Lost Communication with Main Body ECU | The power management control ECU (power management CPU) does not receive data from the main body ECU (multiplex network body ECU) for 3.1 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 20 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0155 | Lost Communication with Combination Meter | The power management control ECU (power management CPU) does not receive data from the combination meter assembly for 3.1 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 20 seconds. | A message is displayed on the multi-information display for 15 seconds when the power switch is turned from on (IG) to off. | DTC is stored until it is cleared using the GTS. |
U0293*1 | Lost Communication with HV ECU | The power management control ECU (power management CPU) does not receive data from the power management control ECU (HV CPU) for 3.1 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 13.1 seconds. | MIL illuminates. | DTC is stored until it is cleared using the GTS. |
Power Management Control ECU (w/o Dynamic Radar Cruise Control System) / GTS Display "Cruise Control"
This ECU uses the CAN communication system for DTC communication.
DTC | Detection Item | DTC Detection Condition | DTC Detection Pre-condition | DTC Check Procedure | Warning Indication in Meter | DTC Storage Method |
---|---|---|---|---|---|---|
U0122 | Lost Communication with Vehicle Dynamics Control Module | While the cruise control system is on (the system has been switched on using the ON/OFF button on the cruise control switch), the power management control ECU (HV CPU) does not receive data from the brake booster with master cylinder assembly (skid control ECU) for 2.62 seconds or more. | Both conditions are met:
|
After turning the power switch on (IG), turn the cruise control main switch on and wait for at least 4.72 seconds. |
|
DTC is stored until it is cleared using the GTS. |
Power Management Control ECU / GTS Display "PM1 Gateway"
This ECU uses the CAN communication system for DTC communication.
DTC | Detection Item | DTC Detection Condition | DTC Detection Pre-condition | DTC Check Procedure | Warning Indication in Meter | DTC Storage Method |
---|---|---|---|---|---|---|
U0104 | Lost Communication with Cruise Control Module | The power management control ECU does not receive data from the driving support ECU assembly for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) for 20 seconds or more. | - | DTC is stored until it is cleared using the GTS. |
U0233 | Lost Communication with Blind Spot Monitor Master Module | The power management control ECU does not receive data from the blind spot monitor sensor LH for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) for 20 seconds or more. | - | DTC is stored until it is cleared using the GTS. |
U023A | Lost Communication with Front Camera Module | The power management control ECU does not receive data from the lane departure warning camera for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) for 20 seconds or more. | - | DTC is stored until it is cleared using the GTS. |
U1002 | Lost Communication with Gateway Module | The power management control ECU detects communication errors between itself and the driving support ECU assembly, seat belt control ECU, blind spot monitor sensor LH and lane departure warning camera. | Both conditions are met:
|
Turn the power switch on (IG) for 10 seconds or more. | - | DTC is stored until it is cleared using the GTS. |
U1100 | Lost Communication with Pre-Crash Module | The power management control ECU does not receive data from the seat belt control ECU for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) for 20 seconds or more. | - | DTC is stored until it is cleared using the GTS. |
ECM / GTS Display "Engine and ECT"
This ECU uses the CAN communication system for DTC communication.
DTC | Detection Item | DTC Detection Condition | DTC Detection Pre-condition | DTC Check Procedure | Warning Indication in Meter | DTC Storage Method |
---|---|---|---|---|---|---|
U0293 | Lost Communication with HV ECU | The ECM does not receive data from the power management control ECU (HV CPU) for 0.576 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 1.576 seconds. | MIL illuminates. | DTC is stored until it is cleared using the GTS. |
Power Steering ECU with Motor Assembly / GTS Display "EMPS"
This ECU uses the CAN communication system for DTC communication.
DTC | Detection Item | DTC Detection Condition | DTC Detection Pre-condition | DTC Check Procedure | Warning Indication in Meter | DTC Storage Method |
---|---|---|---|---|---|---|
U0129 | Lost Communication with Brake System Control Module | The power steering ECU with motor assembly does not receive data from the brake booster with master cylinder assembly (skid control ECU) for 2.34 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 5.34 seconds. | EPS warning light illuminates. | DTC remains stored only while malfunction is occurring. |
U0293 | Lost Communication with Hybrid Control Module | The power steering ECU with motor assembly does not receive data from the power management control ECU (HV CPU) for 5 minutes or more. | All conditions are met:
|
Drive the vehicle at a speed of 20 km/h (12 mph) or more for at least 5 minutes. | EPS warning light does not illuminate. | DTC remains stored only while malfunction is occurring. |
Brake Booster with Master Cylinder Assembly (Skid Control ECU) / GTS Display "ABS/VSC/TRC"
This ECU uses the CAN communication system for DTC communication.
DTC | Detection Item | DTC Detection Condition | DTC Detection Pre-condition | DTC Check Procedure | Warning Indication in Meter | DTC Storage Method |
---|---|---|---|---|---|---|
U0073 | Control Module Communication Bus OFF | One of the following conditions is met:
|
Both conditions are met:
|
Turn the power switch on (IG) and wait at least 60 seconds. |
|
DTC is stored until it is cleared using the GTS. |
U0123 | Lost Communication with Yaw Rate Sensor Module | One of the following conditions is met:
|
Both conditions are met:
|
Turn the power switch on (IG) and wait at least 60 seconds. |
|
DTC is stored until it is cleared using the GTS. |
U0124 | Lost Communication with Lateral Acceleration Sensor Module | One of the following conditions is met:
|
Both conditions are met:
|
Turn the power switch on (IG) and wait at least 60 seconds. |
|
DTC is stored until it is cleared using the GTS. |
U0126 | Lost Communication with Steering Angle Sensor Module | One of the following conditions is met:
|
Both conditions are met:
|
Turn the power switch on (IG) and wait at least 60 seconds. | Slip indicator light illuminates. | DTC is stored until it is cleared using the GTS. |
U0293 | Communication Error from HV ECU | One of the following conditions is met:
|
Both conditions are met:
|
Turn the power switch on (IG) and wait at least 60 seconds. |
|
DTC is stored until it is cleared using the GTS. |
Steering Sensor / GTS Display "Spiral cable (Steering Angle Sensor)"
The steering sensor is connected to the CAN communication system, but the steering sensor does not store or output CAN communication DTCs.
Airbag Sensor Assembly / GTS Display "Airbag"
The airbag sensor assembly is connected to the CAN communication system, but the airbag sensor assembly does not store or output CAN communication DTCs.
Main Body ECU (Multiplex Network Body ECU) / GTS Display "Main Body"
This ECU uses the CAN communication system for DTC communication.
DTC | Detection Item | DTC Detection Condition | DTC Detection Pre-condition | DTC Check Procedure | Warning Indication in Meter | DTC Storage Method |
---|---|---|---|---|---|---|
U0100 | Lost Communication With ECM/PCM "A" | The main body ECU (multiplex network body ECU) does not receive data from the ECM for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 20 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0101 | Lost Communication with TCM | The main body ECU (multiplex network body ECU) does not receive data from the power management control ECU (HV CPU) for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 20 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0120 | Lost Communication With Starter / Generator Control Module | The main body ECU (multiplex network body ECU) does not receive data from the power management control ECU (power management CPU) for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 20 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0151 | Lost Communication With Restraints Control Module | The main body ECU (multiplex network body ECU) does not receive data from the airbag sensor assembly for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 20 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0155 | Lost Communication with Instrument Panel Cluster (IPC) Control Module | The main body ECU (multiplex network body ECU) does not receive data from the combination meter assembly for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 20 seconds. | Tire pressure warning light blinks and then illuminates. | DTC is stored until it is cleared using the GTS. |
U0163 | Lost Communication with Navigation Control Module |
|
Both conditions are met:
|
Turn the power switch on (IG) and wait at least 20 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0164 | Lost Communication with HVAC Control Module | The main body ECU (multiplex network body ECU) does not receive data from the air conditioning amplifier assembly for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 20 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0182 | Lost Communication with AFS | The main body ECU (multiplex network body ECU) does not receive data from the lane departure warning camera for 5 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 10 seconds. | Displays messages on the multi-information display. | DTC is stored until it is cleared using the GTS. |
U0198 | Lost Communication with Telematic Control Module | The main body ECU (multiplex network body ECU) does not receive data from the telematics transceiver for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 20 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0199 | Lost Communication with "Door Control Module A" | The main body ECU (multiplex network body ECU) does not receive data from the outer mirror control ECU assembly RH for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 20 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0200 | Lost Communication with "Door Control Module B" | The main body ECU (multiplex network body ECU) does not receive data from the outer mirror control ECU assembly LH for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 20 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0208 | Lost Communication with "Seat Control Module A" | The main body ECU (multiplex network body ECU) does not receive data from the front power seat switch LH (for LHD), front power seat switch RH (for RHD) for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 20 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0209 | Lost Communication with "Seat Control Module B" | The main body ECU (multiplex network body ECU) does not receive data from the front power seat switch RH (for LHD), front power seat switch LH (for RHD) for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 20 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0230 | Lost Communication with Rear Gate Module | The main body ECU (multiplex network body ECU) does not receive data from the luggage closer motor assembly for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 20 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0265 | Lost Communication with Parking Assist Monitor Module | The main body ECU (multiplex network body ECU) does not receive data from the rear television camera assembly for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 20 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0293 | Lost Communication With Hybrid Powertrain Control Module | The main body ECU (multiplex network body ECU) does not receive data from the power management control ECU (HV CPU) for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 20 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0327 | Software Incompatibility with Vehicle Security Control Module | The main body ECU (multiplex network body ECU) does not receive data from the certification ECU (smart key ECU assembly) for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 20 seconds. | - | DTC is stored until it is cleared using the GTS. |
U1002 | Lost Communication with Gateway Module | The main body ECU (multiplex network body ECU) does not receive data from ECUs with a sub bus 1 connection record for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 20 seconds. | - | DTC is stored until it is cleared using the GTS. |
U1115 | Lost Communication with Tilt & Telescopic Module | The main body ECU (multiplex network body ECU) does not receive data from the multiplex tilt and telescopic ECU for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 20 seconds. | - | DTC is stored until it is cleared using the GTS. |
Certification ECU (Smart Key ECU Assembly) / GTS Display "Entry&Start"
This ECU uses the CAN communication system for DTC communication.
DTC | Detection Item | DTC Detection Condition | DTC Detection Pre-condition | DTC Check Procedure | Warning Indication in Meter | DTC Storage Method |
---|---|---|---|---|---|---|
U0100 | Lost Communication with ECM | The certification ECU (smart key ECU assembly) does not receive data from the ECM for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 20 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0142 | Lost Communication with Main Body ECU | The certification ECU (smart key ECU assembly) does not receive data from the main body ECU (multiplex network body ECU) for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 20 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0155 | Lost Communication with Combination Meter | The certification ECU (smart key ECU assembly) does not receive data from the combination meter assembly for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 20 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0293 | Lost Communication with HV ECU | The certification ECU (smart key ECU assembly) does not receive data from the power management control ECU (HV CPU) for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 20 seconds. | - | DTC is stored until it is cleared using the GTS. |
Air Conditioning Amplifier Assembly / GTS Display "Air Conditioner"
This ECU uses the CAN communication system for DTC communication.
DTC | Detection Item | DTC Detection Condition | DTC Detection Pre-condition | DTC Check Procedure | Warning Indication in Meter | DTC Storage Method |
---|---|---|---|---|---|---|
U0131 | Lost Communication with Power Steering Control Module | The air conditioning amplifier assembly does not receive data from the power steering ECU with motor assembly for 5 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 5 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0142 | Lost Communication with Body Control Module "B" | The air conditioning amplifier assembly does not receive data from the main body ECU (multiplex network body ECU) for 5 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 5 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0155 | Lost Communication with Instrument Panel Cluster (IPC) Control Module | The air conditioning amplifier assembly does not receive data from the combination meter assembly for 5 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 5 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0163 | Lost Communication with Navigation Control Module |
|
Both conditions are met:
|
Turn the power switch on (IG) and wait at least 5 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0293 | Lost Communication with HV ECU | The air conditioning amplifier assembly does not receive data from the power management control ECU (HV CPU) for 5 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 5 seconds. | - | DTC is stored until it is cleared using the GTS. |
Combination Meter Assembly / GTS Display "Combination Meter"
This ECU uses the CAN communication system for DTC communication.
DTC | Detection Item | DTC Detection Condition | DTC Detection Pre-condition | DTC Check Procedure | Warning Indication in Meter | DTC Storage Method |
---|---|---|---|---|---|---|
U0100 | Lost Communication with ECM/PCM "A" | The combination meter assembly does not receive data from the ECM or power management control ECU (HV CPU) for 2 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 2 seconds. |
|
DTC is stored until it is cleared using the GTS. |
U0129 | Lost Communication with Brake System Control Module | The combination meter assembly does not receive data from the brake booster with master cylinder assembly (skid control ECU) for 3 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 3 seconds. | Needle of speedometer remains at 0 km/h (0 mph). | DTC is stored until it is cleared using the GTS. |
U0131 | Lost Communication with Power Steering Control Module | The combination meter assembly does not receive data from the power steering ECU with motor assembly for 3 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 3 seconds. | EPS warning light illuminates. | DTC is stored until it is cleared using the GTS. |
U0142 | Lost Communication with Body Control Module "B" | The combination meter assembly does not receive data from the main body ECU (multiplex network body ECU) for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 10 seconds. | Vehicle customization items are not displayed on multi-information display. | DTC is stored until it is cleared using the GTS. |
U0151 | Lost Communication with Restraints Control Module | The combination meter assembly does not receive data from the airbag sensor assembly for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 10 seconds. | SRS warning light illuminates. | DTC is stored until it is cleared using the GTS. |
U023A | Lost Communication with Front Camera Module | The combination meter assembly does not receive data from the lane departure warning camera for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 10 seconds. |
|
DTC is stored until it is cleared using the GTS. |
Multi-media Module Receiver Assembly / GTS Display "Navigation System"
This ECU uses the CAN communication system for DTC communication.
DTC | Detection Item | DTC Detection Condition | DTC Detection Pre-condition | DTC Check Procedure | Warning Indication in Meter | DTC Storage Method |
---|---|---|---|---|---|---|
U0073 | Sending Malfunction (Navigation to APGS) | The multi-media module receiver assembly does not send/receive data for 5 seconds or more. | Both conditions are met:
|
Turn the power switch on (ACC) and wait at least 6 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0100 | Engine ECU Communication | The multi-media module receiver assembly does not receive data from the ECM for 4 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 5 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0126 | Steering Sensor Communication | The multi-media module receiver assembly does not receive data from the steering sensor for 10.08 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 11.08 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0129 | VSC(ECB)ECU Communication | The multi-media module receiver assembly does not receive data from the brake booster with master cylinder assembly (skid control ECU) for 1 second or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 2 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0131 | Lost Communication with Electric Power Steering ECU | The multi-media module receiver assembly does not receive data from the power steering ECU with motor assembly for 1 second or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 2 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0140 | Lost Communication with Body Control Module | The multi-media module receiver assembly does not receive data from the main body ECU (multiplex network body ECU) for 3 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 4 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0155 | Meter ECU Communication | The multi-media module receiver assembly does not receive data from the combination meter assembly for 30 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 31 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0164 | Air Conditioner ECU Communication | The multi-media module receiver assembly does not receive data from the air conditioning amplifier assembly for 3 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 4 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0198 | Lost Communication with Telematic Control Module | The multi-media module receiver assembly does not receive data from the telematics transceiver for 3 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 3 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0293 | HV ECU Communication | The multi-media module receiver assembly does not receive data from the power management control ECU (HV CPU) for 4 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 5 seconds. | - | DTC is stored until it is cleared using the GTS. |
U1110 | Clearance Sonar ECU Communication | The multi-media module receiver assembly does not receive data from the clearance warning ECU assembly for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 11 seconds. | - | DTC is stored until it is cleared using the GTS. |
Radio Receiver Assembly / GTS Display "Navigation System"
This ECU uses the CAN communication system for DTC communication.
DTC | Detection Item | DTC Detection Condition | DTC Detection Pre-condition | DTC Check Procedure | Warning Indication in Meter | DTC Storage Method |
---|---|---|---|---|---|---|
U0073 | Sending Malfunction (Navigation to APGS) | The radio receiver assembly does not send/receive data for 5 seconds or more. | Both conditions are met:
|
Turn the power switch on (ACC) and wait at least 5 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0100 | Lost Communication with ECM | The radio receiver assembly does not receive data from the ECM for 4 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 5 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0129 | VSC(ECB)ECU Communication | The radio receiver assembly does not receive data from the brake booster with master cylinder assembly (skid control ECU) for 1 second or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 2 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0140 | Lost Communication with Body Control Module | The radio receiver assembly does not receive data from the main body ECU (multiplex network body ECU) for 3 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 4 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0155 | Meter ECU Communication | The radio receiver assembly does not receive data from the combination meter assembly for 30 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 31 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0164 | Air Conditioner ECU Communication | The radio receiver assembly does not receive data from the air conditioning amplifier assembly for 3 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 4 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0293 | HV ECU Communication | The radio receiver assembly does not receive data from the power management control ECU (HV CPU) for 4 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 5 seconds. | - | DTC is stored until it is cleared using the GTS. |
U1110 | Clearance Sonar ECU Communication | The radio receiver assembly does not receive data from the clearance warning ECU assembly for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 11 seconds. | - | DTC is stored until it is cleared using the GTS. |
Clearance Warning ECU Assembly / GTS Display "Clearance Sonar"
This ECU uses the CAN communication system for DTC communication.
DTC | Detection Item | DTC Detection Condition | DTC Detection Pre-condition | DTC Check Procedure | Warning Indication in Meter | DTC Storage Method |
---|---|---|---|---|---|---|
U0101 | Lost Communication with TCM | The clearance warning ECU assembly does not receive data from the power management control ECU (HV CPU) for 5 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 10 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0155 | Lost Communication with Instrument Panel Cluster (IPC) Control Module | The clearance warning ECU assembly does not receive data from the combination meter assembly for 5 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 10 seconds. | - | DTC is stored until it is cleared using the GTS. |
Outer Mirror Control ECU Assembly LH / GTS Display "Mirror L"
This ECU uses the CAN communication system for DTC communication.
DTC | Detection Item | DTC Detection Condition | DTC Detection Pre-condition | DTC Check Procedure | Warning Indication in Meter | DTC Storage Method |
---|---|---|---|---|---|---|
U0142 | Lost Communication with Body Control Module ''B'' | The outer mirror control ECU assembly LH does not receive data from the main body ECU (multiplex network body ECU) for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 10 seconds. | - | DTC is stored until it is cleared using the GTS. |
Outer Mirror Control ECU Assembly RH / GTS Display "Mirror R"
This ECU uses the CAN communication system for DTC communication.
DTC | Detection Item | DTC Detection Condition | DTC Detection Pre-condition | DTC Check Procedure | Warning Indication in Meter | DTC Storage Method |
---|---|---|---|---|---|---|
U0142 | Lost Communication with Body Control Module ''B'' | The outer mirror control ECU assembly RH does not receive data from the main body ECU (multiplex network body ECU) for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 10 seconds. | - | DTC is stored until it is cleared using the GTS. |
Multiplex Tilt and Telescopic ECU / GTS Display "Tilt & Telescopic"
This ECU uses the CAN communication system for DTC communication.
DTC | Detection Item | DTC Detection Condition | DTC Detection Pre-condition | DTC Check Procedure | Warning Indication in Meter | DTC Storage Method |
---|---|---|---|---|---|---|
U0142 | Lost Communication with Main Body ECU | The multiplex tilt and telescopic ECU does not receive data from the main body ECU (multiplex network body ECU) for 10 seconds or more. | The power source voltage of the multiplex tilt and telescopic ECU is 10 V or more. | Turn the power switch on (IG) and wait at least 20 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0208 | Lost Communication with "Seat Control Module A" | The multiplex tilt and telescopic ECU does not receive data from the front power seat switch LH (for LHD), front power seat switch RH (for RHD) for 10 seconds or more. | The power source voltage of the multiplex tilt and telescopic ECU is 10 V or more. | Turn the power switch on (IG) and wait at least 20 seconds. | - | DTC is stored until it is cleared using the GTS. |
Front Power Seat Switch LH / GTS Display "Driver Seat" (for LHD), "Passenger Seat" (for RHD)
The front power seat switch LH is connected to the CAN communication system, but the front power seat switch LH does not store or output CAN communication DTCs.
Front Power Seat Switch RH / GTS Display "Passenger Seat" (for LHD), "Driver Seat" (for RHD)
The front passenger seat switch RH is connected to the CAN communication system, but the front power seat switch RH does not store or output CAN communication DTCs.
Luggage Closer Motor Assembly / GTS Display "Back Door"
The luggage closer motor assembly is connected to the CAN communication system, but the luggage closer motor assembly does not store or output CAN communication DTCs.
Blind Spot Monitor Sensor LH / GTS Display "Blind spot monitor Master"
This ECU uses the CAN communication system for DTC communication.
*: Refer to Blind Spot Monitor System (Click here).
DTC | Detection Item | DTC Detection Condition | DTC Detection Pre-condition | DTC Check Procedure | Warning Indication in Meter | DTC Storage Method |
---|---|---|---|---|---|---|
U0126 | Lost Communication with Steering Angle Sensor Module | The blind spot monitor sensor LH does not receive data from the steering sensor for 0.72 seconds or more. | Both conditions are met:
|
After turning the power switch on (IG), blind spot monitor main switch on and wait for at least 1.72 seconds. | Displays messages on the multi-information display. | DTC is stored until it is cleared using the GTS. |
U0129 | Lost Communication with Brake System Control Module | The blind spot monitor sensor LH does not receive data from the brake booster with master cylinder assembly (skid control ECU) for 2.22 seconds or more. | Both conditions are met:
|
After turning the power switch on (IG), turn the blind spot monitor main switch on and wait for at least 4.22 seconds. | Displays messages on the multi-information display. | DTC is stored until it is cleared using the GTS. |
U0142 | Lost Communication with Body Control Module "B" | The blind spot monitor sensor LH does not receive data from the main body ECU (multiplex network body ECU) for 10.6 seconds or more. | Both conditions are met:
|
After turning the power switch on (IG), turn the blind spot monitor main switch on and wait for at least 11.6 seconds. | Displays messages on the multi-information display. | DTC is stored until it is cleared using the GTS. |
U0232* | Lost Communication with Blind Spot Monitor Slave Module | The blind spot monitor sensor LH does not receive data from the blind spot monitor sensor RH for 10.6 seconds or more. | Both conditions are met:
|
After turning the power switch on (IG), turn the blind spot monitor main switch on and wait for at least 11.6 seconds. | Displays messages on the multi-information display. | DTC is stored until it is cleared using the GTS. |
U0293 | Lost Communication with HV ECU | The blind spot monitor sensor LH does not receive data from the power management control ECU (HV CPU) for 10.84 seconds or more. | Both conditions are met:
|
After turning the power switch on (IG), turn the blind spot monitor main switch on and wait for at least 11.84 seconds. | Displays messages on the multi-information display. | DTC is stored until it is cleared using the GTS. |
U1331* | Software Incompatibility with Body Control Module "B" | Destination information of the main body ECU (multiplex network body ECU) and blind spot monitor sensor do not match. | Both conditions are met:
|
Turn the power switch on (IG), turn the blind spot monitor system on using the blind spot monitor main switch (ON/OFF switch) and wait at least 1 second. | Displays messages on the multi-information display. | DTC is stored until it is cleared using the GTS. |
Seat Belt Control ECU / GTS Display "Pre-Crash"
This ECU uses the CAN communication system for DTC communication.
DTC | Detection Item | DTC Detection Condition | DTC Detection Pre-condition | DTC Check Procedure | Warning Indication in Meter | DTC Storage Method |
---|---|---|---|---|---|---|
U0129 | Lost Communication with Brake System Control Module | One of the following conditions is met:
|
Both conditions are met:
|
Turn the power switch on (IG) and wait at least 4.68 seconds. |
|
DTC is stored until it is cleared using the GTS. |
U0140 | Lost Communication with J/B ECU | Both conditions are met:
|
Both conditions are met:
|
Turn the power switch on (IG) and wait at least 6.2 seconds. |
|
DTC is stored until it is cleared using the GTS. |
U0151 | Lost Communication with Airbag ECU | The seat belt control ECU does not receive data from the airbag sensor assembly for 5.6 seconds or more. | All conditions are met:
|
After turning the power switch on (IG), drive the vehicle at 5 km/h (3 mph) or more for 6.2 seconds or more. |
|
DTC is stored until it is cleared using the GTS. |
U1104 | Lost Communication with Driving Support ECU | One of the following conditions is met:
|
Both conditions are met:
|
Turn the power switch on (IG) and wait at least 1.68 seconds. |
|
DTC is stored until it is cleared using the GTS. |
Driving Support ECU Assembly / GTS Display "Pre-Crash 2"
This ECU uses the CAN communication system for DTC communication.
*: Refer to Pre-crash Safety System (Click here).
DTC | Detection Item | DTC Detection Condition | DTC Detection Pre-condition | DTC Check Procedure | Warning Indication in Meter | DTC Storage Method |
---|---|---|---|---|---|---|
U0125 | Lost Communication with Yaw Rate Sensor Module | The driving support ECU assembly does not receive data from the airbag sensor assembly (yaw rate sensor) for 0.736 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 3.736 seconds. |
|
DTC is stored until it is cleared using the GTS. |
U0126 | Lost Communication with Steering Angle Sensor Module | The driving support ECU assembly does not receive data from the steering sensor for 0.736 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 1.736 seconds. |
|
DTC is stored until it is cleared using the GTS. |
U0129 | Lost Communication with Brake System Control Module | The driving support ECU assembly does not receive data from the brake booster with master cylinder assembly (skid control ECU) for 3 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 5 seconds. |
|
DTC is stored until it is cleared using the GTS. |
U0142 | Lost Communication with Body Control Module "B" | The driving support ECU assembly does not receive data from the main body ECU (multiplex network body ECU) for 11.2 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 12.2 seconds. |
|
DTC is stored until it is cleared using the GTS. |
U0235 | Lost Communication with Cruise Control Front Distance Range Sensor | The driving support ECU assembly does not receive data from the millimeter wave radar sensor assembly for 0.5 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 1.5 seconds. |
|
DTC is stored until it is cleared using the GTS. |
U0293 | Lost Communication with HV ECU | The driving support ECU assembly does not receive data from the power management control ECU (HV CPU) for 4 seconds or more. | All conditions are met:
|
After turning the power switch on (IG), drive the vehicle at 5 km/h (3 mph) or more for 5 seconds. |
|
DTC is stored until it is cleared using the GTS. |
U1002 | Lost Communication with Gateway Module | The driving support ECU assembly does not receive data from ECU with a sub bus 13 connection record for 0.5 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 1.5 seconds. |
|
DTC is stored until it is cleared using the GTS. |
U1100 | Lost Communication with Seat Belt Control ECU | The driving support ECU assembly does not receive data from the seat belt control ECU for 8.6 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 9.6 seconds. |
|
DTC is stored until it is cleared using the GTS. |
U1104* | Lost Communication with Driving Support ECU | The ECM, brake booster with master cylinder assembly (skid control ECU) or millimeter wave radar sensor assembly does not receive data from the driving support ECU assembly for 1 second or more. | The power switch is on (IG) for 1 second or more. | Turn the power switch on (IG) and wait at least 2 seconds. |
|
DTC is stored until it is cleared using the GTS. |
Driving Support ECU Assembly / GTS Display "Radar Cruise"
This ECU uses the CAN communication system for DTC communication.
*: Refer to Dynamic Radar Cruise Control System (Click here).
DTC | Detection Item | DTC Detection Condition | DTC Detection Pre-condition | DTC Check Procedure | Warning Indication in Meter | DTC Storage Method |
---|---|---|---|---|---|---|
U0125 | Lost Communication with Yaw Rate Sensor Module | The driving support ECU assembly does not receive data from the airbag sensor assembly (yaw rate sensor) for 0.736 seconds or more. | All conditions are met:
|
After turning the power switch on (IG), turn the cruise control main switch on and drive the vehicle at 36 km/h (22 mph) or more for 3.736 seconds. |
|
DTC is stored until it is cleared using the GTS. |
U0126 | Lost Communication with Steering Angle Sensor Module | The driving support ECU assembly does not receive data from the steering sensor for 0.736 seconds or more. | All conditions are met:
|
After turning the power switch on (IG), turn the cruise control main switch on and drive the vehicle at 36 km/h (22 mph) or more for 1.736 seconds. |
|
DTC is stored until it is cleared using the GTS. |
U0129 | Lost Communication with Brake System Control Module | The driving support ECU assembly does not receive data from the brake booster with master cylinder assembly (skid control ECU) for 3 seconds or more. | All conditions are met:
|
After turning the power switch on (IG), turn the cruise control main switch on and drive the vehicle at 36 km/h (22 mph) or more for 5 seconds or more. |
|
DTC is stored until it is cleared using the GTS. |
U0235* | Lost Communication with Cruise Control Front Distance Range Sensor | The driving support ECU assembly does not receive data from the millimeter wave radar sensor assembly for 0.5 seconds or more. | All conditions are met:
|
After turning the power switch on (IG), turn the cruise control main switch on and drive the vehicle at 36 km/h (22 mph) or more for 1.5 seconds or more. |
|
DTC is stored until it is cleared using the GTS. |
U0293 | Lost Communication with Hybrid Vehicle Control System | The driving support ECU assembly does not receive data from the power management control ECU (HV CPU) for 4 seconds or more. | All conditions are met:
|
After turning the power switch on (IG), turn the cruise control main switch on and drive the vehicle at 36 km/h (22 mph) or more for 5 seconds or more. |
|
DTC is stored until it is cleared using the GTS. |
U1104* | Lost Communication with Driving Support ECU | The ECM, brake booster with master cylinder assembly (skid control ECU) or millimeter wave radar sensor assembly does not receive data from the driving support ECU assembly for 1 second or more. | Both conditions are met:
|
Drive the vehicle at 36 km/h (22 mph) for 2 seconds or more. |
|
DTC is stored until it is cleared using the GTS. |
Lane Departure Warning Camera (for LHD) / GTS Display "Lane Departure Alert"
This ECU uses the CAN communication system for DTC communication.
*: Refer to Lane Departure Alert System:
w/ Dynamic Radar Cruise Control System (Click here)
w/o Dynamic Radar Cruise Control System (Click here)
DTC | Detection Item | DTC Detection Condition | DTC Detection Pre-condition | DTC Check Procedure | Warning Indication in Meter | DTC Storage Method |
---|---|---|---|---|---|---|
U0101 | Lost Communication with TCM | The lane departure warning camera does not receive data from the power management control ECU (HV CPU) for 5 seconds or more. | All conditions are met:
|
After turning the power switch on (IG) and drive the vehicle at 1 km/h (1 mph) or more for 7 seconds or more. |
|
DTC is stored until it is cleared using the GTS. |
U0104 | Lost Communication with Cruise Control Module | The lane departure warning camera does not receive data from the driving support ECU assembly for 5 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 7 seconds. |
|
DTC is stored until it is cleared using the GTS. |
U0123 | Lost Communication with Yaw Rate Sensor Module | The lane departure warning camera does not receive data from the airbag sensor assembly (yaw rate sensor) for 5 seconds or more. | All conditions are met:
|
After turning the power switch on (IG) and drive the vehicle at 1 km/h (1 mph) or more for 7 seconds or more. |
|
DTC is stored until it is cleared using the GTS. |
U0129 | Lost Communication with Brake System Control Module | The lane departure warning camera does not receive data from the brake booster with master cylinder assembly (skid control ECU) for 5 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 7 seconds. |
|
DTC is stored until it is cleared using the GTS. |
U0142 | Lost Communication with Body Control Module "B" | The lane departure warning camera does not receive data from the main body ECU (multiplex network body ECU) for 5 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 7 seconds. |
|
DTC is stored until it is cleared using the GTS. |
U0155 | Lost Communication with Instrument Panel Cluster (IPC) Control Module (Combination Meter) | The lane departure warning camera does not receive data from the combination meter assembly for 50 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 52 seconds. |
|
DTC is stored until it is cleared using the GTS. |
U1000* | CAN Communication Failure (Message Registry) | When the power switch is turned on (IG), a CAN communication malfunction is detected. | The power switch is on (IG). | Turn the power switch on (IG). | Displays messages on the multi-information display. | DTC remains stored only while malfunction is occurring. |
Telematics Transceiver / GTS Display "Telematics"
This ECU uses the CAN communication system for DTC communication.
The telematics transceiver informs the multi-media module receiver assembly of stored DTCs through the USB communication line.
DTC | Detection Item | DTC Detection Condition | DTC Detection Pre-condition | DTC Check Procedure | Warning Indication in Meter | DTC Storage Method |
---|---|---|---|---|---|---|
U0140 | Lost Communication with Body Control Module | The telematics transceiver does not receive data from the main body ECU (multiplex network body ECU) for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 20 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0155 | Meter ECU Communication | The telematics transceiver does not receive data from the combination meter assembly for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 20 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0163 | Lost Communication with Navigation Control Module | The telematics transceiver does not receive data from the multi-media module receiver assembly for 10 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 20 seconds. | - | DTC is stored until it is cleared using the GTS. |
Rear Television Camera Assembly / GTS Display "Advanced Parking Guidance/Parking Assist Monitor"
This ECU uses the CAN communication system for DTC communication.
*: The rear television camera assembly stores this DTC if an internal error related to the CAN communication system is detected.
DTC | Detection Item | DTC Detection Condition | DTC Detection Pre-condition | DTC Check Procedure | Warning Indication in Meter | DTC Storage Method |
---|---|---|---|---|---|---|
U0100 | Lost Communication with ECM / PCM "A" | The rear television camera assembly does not receive data from the power management control ECU for 11 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 14 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0126 | Lost Communication with Steering Angle Sensor Module | The rear television camera assembly does not receive data from the steering sensor for 11 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 14 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0129 | Lost Communication with Brake System Control Module | The rear television camera assembly does not receive data from the brake booster with master cylinder assembly (skid control ECU) for 11 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 14 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0140 | Lost Communication with Body Control Module | The rear television camera assembly does not receive data from the main body ECU (multiplex network body ECU) for 11 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 14 seconds. | - | DTC is stored until it is cleared using the GTS. |
U0163 | Lost Communication with Navigation Control Module | The rear television camera assembly does not receive data from the radio receiver assembly for 11 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 14 seconds. | - | DTC is stored until it is cleared using the GTS. |
U1000* | CAN Communication Failure (Message Registry) | When the power switch is turned on (IG), a CAN communication malfunction is detected. | The power switch is on (IG). | Turn the power switch on (IG). | - | DTC remains stored only while malfunction is occurring. |
U1110 | Lost Communication with Clearance Sonar Module | The rear television camera assembly does not receive data from the clearance warning ECU assembly for 11 seconds or more. | Both conditions are met:
|
Turn the power switch on (IG) and wait at least 14 seconds. | - | DTC is stored until it is cleared using the GTS. |
Millimeter Wave Radar Sensor Assembly
The millimeter wave radar sensor assembly is connected to the CAN communication system, but the millimeter wave radar sensor assembly does not store or output CAN communication DTCs.
DTC COMBINATION TABLE (OPEN IN CAN BRANCH OF V BUS, PAST COMMUNICATION ERROR) (for LHD)
Regarding a past communication error of an ECU and sensor connected to the V bus (in this case, normal is displayed when performing the CAN bus check, but communication DTCs are output), the probable CAN branch that had a malfunction can be determined based on the following DTC combination table.
Based on the table below and DTCs output from ECUs connected via CAN communication, the probable part for which communication stop occurred can be determined.
Regarding an open in a CAN branch and a communication stop that is currently occurring, the malfunctioning part can be confirmed easily by performing the CAN bus check using the GTS because the ECU or sensor connected to the CAN branch does not respond (the ECU or sensor name will not be displayed on the screen).
If an open in a CAN main bus line, a short between the CAN bus lines (CANH and CANL) or a +B or ground short in the CAN bus occurs, DTCs of almost all ECUs (or sensors) on the CAN bus may be output, or a message indicating a communication error may be displayed on the GTS screen. In this case, check the resistance of the CAN bus (steps 5 to 7) first (Click here).
If an open occurs in just one of the lines of a CAN branch, DTCs which are not related to malfunctioning parts may be output (DTCs may be displayed randomly), or a message indicating a communication error may be displayed.
- | Trouble Mode (Open in One CAN Branch Line) | |||||
---|---|---|---|---|---|---|
V Bus | ||||||
Output ECU | Output DTC | Center Airbag Sensor Communication Stop Mode (Click here) |
Air Conditioning Amplifier Communication Stop Mode (Click here) |
Multi-media Module Receiver Assembly Communication Stop Mode (Click here) |
Audio Receiver Assembly Communication Stop Mode (Click here) |
|
V Bus | Airbag Sensor Assembly | - | - | - | - | - |
Air Conditioning Amplifier Assembly | U0101 | X | ▲ | X | X | |
U0131 | X | ▲ | X | X | ||
U0142 | X | ▲ | X | X | ||
U0155 | X | ▲ | X | X | ||
U0163 | X | ▲ | ▲ | ▲ | ||
U0293 | X | ▲ | X | X | ||
Multi-media Module Receiver Assembly | U0073 | X | X | ▲ | - | |
U0100 | X | X | ▲ | - | ||
U0126 | X | X | ▲ | - | ||
U0129 | X | X | ▲ | - | ||
U0131 | X | X | ▲ | - | ||
U0140 | X | X | ▲ | - | ||
U0155 | X | X | ▲ | - | ||
U0164 | X | ▲ | ▲ | - | ||
U0198 | X | X | ▲ | - | ||
U0293 | X | X | ▲ | - | ||
U1110 | X | X | ▲ | - | ||
Radio Receiver Assembly | U0073 | X | X | - | ▲ | |
U0100 | X | X | - | ▲ | ||
U0129 | X | X | - | ▲ | ||
U0140 | X | X | - | ▲ | ||
U0155 | X | X | - | ▲ | ||
U0164 | X | ▲ | - | ▲ | ||
U0293 | X | X | - | ▲ | ||
U1110 | X | X | - | ▲ | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | X | X | X | X | |
U0101 | X | X | X | X | ||
U0120 | X | X | X | X | ||
U0151 | ▲ | X | X | X | ||
U0155 | X | X | X | X | ||
U0164 | X | ▲ | X | X | ||
U0198 | X | X | X | - | ||
U0293 | X | X | X | X | ||
U0327 | X | X | X | X | ||
Clearance Warning ECU Assembly | U0101 | X | X | X | X | |
U0155 | X | X | X | X | ||
V Bus | Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | ▲ | X | X | X |
U0123 | ▲ | X | X | X | ||
U0124 | ▲ | X | X | X | ||
U0126 | X | X | X | X | ||
U0293 | X | X | X | X | ||
Power Steering ECU with Motor Assembly | U0129 | X | X | X | X | |
ECM | - | - | - | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | X | X | X | X | |
U0142 | X | X | X | X | ||
U0155 | X | X | X | X | ||
U0293 | X | X | X | X | ||
Combination Meter Assembly | U0100 | X | X | X | X | |
U0129 | X | X | X | X | ||
U0131 | X | X | X | X | ||
U0142 | X | X | X | X | ||
U0151 | ▲ | X | X | X | ||
U023A | X | X | X | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | X | X | X | X | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | - | |
Steering Sensor | - | - | - | - | - | |
Telematics Transceiver | U0140 | X | X | X | - | |
U0155 | X | X | X | - | ||
U0163 | X | X | ▲ | - | ||
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | X | X | X | X |
U0200 | X | X | X | X | ||
U0208 | X | X | X | X | ||
U0230 | X | X | X | X | ||
U1002 | X | X | X | X | ||
U1115 | X | X | X | X | ||
Luggage Closer Motor Assembly | - | - | - | - | - | |
Sub Bus 1 | Outer Mirror Control ECU Assembly LH | U0142 | X | X | X | X |
Outer Mirror Control ECU Assembly RH | U0142 | X | X | X | X | |
Front Power Seat Switch LH | - | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | - | |
Multiplex Tilt and Telescopic ECU | U0142 | X | X | X | X | |
U0208 | X | X | X | X | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | X | X | X | X |
U0126 | X | X | X | X | ||
U0129 | X | X | X | X | ||
U0142 | X | X | X | X | ||
U0293 | X | X | X | X | ||
Driving Support ECU Assembly | U0125 | ▲ | X | X | X | |
U0126 | X | X | X | X | ||
U0129 | X | X | X | X | ||
U0142 | X | X | X | X | ||
U0293 | X | X | X | X | ||
U1100 | X | X | X | X | ||
Lane Departure Warning Camera | U0101 | X | X | X | X | |
U0123 | ▲ | X | X | X | ||
U0129 | X | X | X | X | ||
U0142 | X | X | X | X | ||
U0155 | X | X | X | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | X | X | X | X | |
U0233 | X | X | X | X | ||
U023A | X | X | X | X | ||
U1002 | X | X | X | X | ||
U1100 | X | X | X | X | ||
Seat Belt Control ECU | U0129 | X | X | X | X | |
U0140 | X | X | X | X | ||
U0151 | ▲ | X | X | X | ||
U1104 | X | X | X | X |
▲: DTC is likely to be output.
X: DTC is unlikely to be output.
-: DTC is not output.
- | Trouble Mode (Open in One CAN Branch Line) | |||||
---|---|---|---|---|---|---|
V Bus | ||||||
Output ECU | Output DTC | Main Body ECU Communication Stop Mode (Click here) |
Clearance Warning ECU Communication Stop Mode (Click here) |
Skid Control ECU Communication Stop Mode (Click here) |
Power Steering ECU Communication Stop Mode (Click here) |
|
V Bus | Airbag Sensor Assembly | - | - | - | - | - |
Air Conditioning Amplifier Assembly | U0101 | X | X | X | X | |
U0131 | X | X | X | ▲ | ||
U0142 | ▲ | X | X | X | ||
U0155 | X | X | X | X | ||
U0163 | X | X | X | X | ||
U0293 | X | X | X | X | ||
Multi-media Module Receiver Assembly | U0073 | X | X | X | X | |
U0100 | X | X | X | X | ||
U0126 | X | X | X | X | ||
U0129 | X | X | ▲ | X | ||
U0131 | X | X | X | ▲ | ||
U0140 | ▲ | X | X | X | ||
U0155 | X | X | X | X | ||
U0164 | X | X | X | X | ||
U0198 | X | X | X | X | ||
U0293 | X | X | X | X | ||
U1110 | X | ▲ | X | X | ||
Radio Receiver Assembly | U0073 | X | X | X | X | |
U0100 | X | X | X | X | ||
U0129 | X | X | ▲ | X | ||
U0140 | ▲ | X | X | X | ||
U0155 | X | X | X | X | ||
U0164 | X | X | X | X | ||
U0293 | X | X | X | X | ||
U1110 | X | ▲ | X | X | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | ▲ | X | X | X | |
U0101 | ▲ | X | X | X | ||
U0120 | ▲ | X | X | X | ||
U0151 | ▲ | X | X | X | ||
U0155 | ▲ | X | X | X | ||
U0164 | ▲ | X | X | X | ||
U0198 | ▲ | X | X | X | ||
U0293 | ▲ | X | X | X | ||
U0327 | ▲ | X | X | X | ||
Clearance Warning ECU Assembly | U0101 | X | ▲ | X | X | |
U0155 | X | ▲ | X | X | ||
V Bus | Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | X | X | ▲ | X |
U0123 | X | X | ▲ | X | ||
U0124 | X | X | ▲ | X | ||
U0126 | X | X | ▲ | X | ||
U0293 | X | X | ▲ | X | ||
Power Steering ECU with Motor Assembly | U0129 | X | X | ▲ | ▲ | |
ECM | - | - | - | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | X | X | X | X | |
U0142 | ▲ | X | X | X | ||
U0155 | X | X | X | X | ||
U0293 | X | X | X | X | ||
Combination Meter Assembly | U0100 | X | X | X | X | |
U0129 | X | X | ▲ | X | ||
U0131 | X | X | X | ▲ | ||
U0142 | ▲ | X | X | X | ||
U0151 | X | X | X | X | ||
U023A | X | X | X | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | X | X | X | X | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | - | |
Steering Sensor | - | - | - | - | - | |
Telematics Transceiver | U0140 | ▲ | X | X | X | |
U0155 | X | X | X | X | ||
U0163 | X | X | X | X | ||
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | X | X | X | X |
U0200 | X | X | X | X | ||
U0208 | X | X | X | X | ||
U0230 | X | X | X | X | ||
U1002 | X | X | X | X | ||
U1115 | X | X | X | X | ||
Luggage Closer Motor Assembly | - | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | X | X | X | X | |
Sub Bus 1 | Outer Mirror Control ECU Assembly RH | U0142 | X | X | X | X |
Front Power Seat Switch LH | - | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | - | |
Multiplex Tilt and Telescopic ECU | U0142 | X | X | X | X | |
U0208 | X | X | X | X | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | X | X | X | X |
U0126 | X | X | X | X | ||
U0129 | X | X | ▲ | X | ||
U0142 | ▲ | X | X | X | ||
U0293 | X | X | X | X | ||
Driving Support ECU Assembly | U0125 | X | X | X | X | |
U0126 | X | X | X | X | ||
U0129 | X | X | ▲ | X | ||
U0142 | ▲ | X | X | X | ||
U0293 | X | X | X | X | ||
U1100 | X | X | X | X | ||
Lane Departure Warning Camera | U0101 | X | X | X | X | |
U0123 | X | X | X | X | ||
U0129 | X | X | ▲ | X | ||
U0142 | ▲ | X | X | X | ||
U0155 | X | X | X | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | X | X | X | X | |
U0233 | X | X | X | X | ||
U023A | X | X | X | X | ||
U1002 | X | X | X | X | ||
U1100 | X | X | X | X | ||
Seat Belt Control ECU | U0129 | X | X | ▲ | X | |
U0140 | ▲ | X | X | X | ||
U0151 | X | X | X | X | ||
U1104 | X | X | X | X |
▲: DTC is likely to be output.
X: DTC is unlikely to be output.
-: DTC is not output.
- | Trouble Mode (Open in One CAN Branch Line) | ||||
---|---|---|---|---|---|
V Bus | |||||
Output ECU | Output DTC | Certification ECU Communication Stop Mode (Click here) |
Power Management Control ECU Communication Stop Mode (Click here) |
Steering Angle Sensor Communication Stop Mode (Click here) |
|
V Bus | Airbag Sensor Assembly | - | - | - | - |
Air Conditioning Amplifier Assembly | U0101 | X | ▲ | X | |
U0131 | X | X | X | ||
U0142 | X | X | X | ||
U0155 | X | X | X | ||
U0163 | X | X | X | ||
U0293 | X | X | X | ||
Multi-media Module Receiver Assembly | U0073 | X | X | X | |
U0100 | X | ▲ | X | ||
U0126 | X | X | ▲ | ||
U0129 | X | X | X | ||
U0131 | X | X | X | ||
U0140 | X | X | X | ||
U0155 | X | X | X | ||
U0164 | X | X | X | ||
U0198 | X | X | X | ||
U0293 | X | ▲ | X | ||
U1110 | X | X | X | ||
Radio Receiver Assembly | U0073 | X | X | X | |
U0100 | X | ▲ | X | ||
U0129 | X | X | X | ||
U0140 | X | X | X | ||
U0155 | X | X | X | ||
U0164 | X | X | X | ||
U0293 | X | ▲ | X | ||
U1110 | X | X | X | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | X | ▲ | X | |
U0101 | X | ▲ | X | ||
U0120 | X | ▲ | X | ||
U0151 | X | X | X | ||
U0155 | X | X | X | ||
U0164 | X | X | X | ||
U0198 | X | X | X | ||
U0293 | X | ▲ | X | ||
U0327 | ▲ | X | X | ||
Clearance Warning ECU Assembly | U0101 | X | ▲ | X | |
U0155 | X | X | X | ||
V Bus | Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | X | X | ▲ |
U0123 | X | X | X | ||
U0124 | X | X | X | ||
U0126 | X | X | ▲ | ||
U0293 | X | ▲ | X | ||
Power Steering ECU with Motor Assembly | U0129 | X | X | X | |
ECM | - | - | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | ▲ | ▲ | X | |
U0142 | ▲ | X | X | ||
U0155 | ▲ | X | X | ||
U0293 | ▲ | ▲ | X | ||
Combination Meter Assembly | U0100 | X | X | X | |
U0129 | X | X | X | ||
U0131 | X | X | X | ||
U0142 | X | X | X | ||
U0151 | X | X | X | ||
U023A | X | ▲ | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | X | ▲ | X | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | |
Steering Sensor | - | - | - | - | |
Telematics Transceiver | U0140 | X | X | X | |
U0155 | X | X | X | ||
U0163 | X | X | X | ||
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | X | X | X |
U0200 | X | X | X | ||
U0208 | X | X | X | ||
U0230 | X | X | X | ||
U1002 | X | X | X | ||
U1115 | X | X | X | ||
Luggage Closer Motor Assembly | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | X | X | X | |
Outer Mirror Control ECU Assembly RH | U0142 | X | X | X | |
Front Power Seat Switch LH | - | - | - | - | |
Sub Bus 1 | Front Power Seat Switch RH | - | - | - | - |
Multiplex Tilt and Telescopic ECU | U0142 | X | X | X | |
U0208 | X | X | X | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | X | ▲ | X |
U0126 | X | ▲ | ▲ | ||
U0129 | X | ▲ | X | ||
U0142 | X | ▲ | X | ||
U0293 | X | ▲ | X | ||
Driving Support ECU Assembly | U0125 | X | ▲ | X | |
U0126 | X | ▲ | ▲ | ||
U0129 | X | ▲ | X | ||
U0142 | X | ▲ | X | ||
U0293 | X | ▲ | X | ||
U1100 | X | X | X | ||
Lane Departure Warning Camera | U0101 | X | ▲ | X | |
U0123 | X | ▲ | X | ||
U0129 | X | ▲ | X | ||
U0142 | X | ▲ | X | ||
U0155 | X | ▲ | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | X | X | X | |
U0233 | X | X | X | ||
U023A | X | X | X | ||
U1002 | X | X | X | ||
U1100 | X | X | X | ||
Seat Belt Control ECU | U0129 | X | ▲ | X | |
U0140 | X | ▲ | X | ||
U0151 | X | ▲ | X | ||
U1104 | X | X | X |
▲: DTC is likely to be output.
X: DTC is unlikely to be output.
-: DTC is not output.
- | Trouble Mode (Open in One CAN Branch Line) | |||
---|---|---|---|---|
V Bus | ||||
Output ECU | Output DTC | DLC3 | DCM Communication Stop Mode (Click here) |
|
V Bus | Airbag Sensor Assembly | - | - | - |
Air Conditioning Amplifier Assembly | U0101 | X | X | |
U0131 | X | X | ||
U0142 | X | X | ||
U0155 | X | X | ||
U0163 | X | X | ||
U0293 | X | X | ||
V Bus | Multi-media Module Receiver Assembly | U0073 | X | X |
U0100 | X | X | ||
U0126 | X | X | ||
U0129 | X | X | ||
U0131 | X | X | ||
U0140 | X | X | ||
U0155 | X | X | ||
U0164 | X | X | ||
U0198 | X | ▲ | ||
U0293 | X | X | ||
U1110 | X | X | ||
Radio Receiver Assembly | U0073 | X | - | |
U0100 | X | - | ||
U0129 | X | - | ||
U0140 | X | - | ||
U0155 | X | - | ||
U0164 | X | - | ||
U0293 | X | - | ||
U1110 | X | - | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | X | X | |
U0101 | X | X | ||
U0120 | X | X | ||
U0151 | X | X | ||
U0155 | X | X | ||
U0164 | X | X | ||
U0198 | X | ▲ | ||
U0293 | X | X | ||
U0327 | X | X | ||
Clearance Warning ECU Assembly | U0101 | X | X | |
U0155 | X | X | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | X | X | |
U0123 | X | X | ||
U0124 | X | X | ||
U0126 | X | X | ||
U0293 | X | X | ||
Power Steering ECU with Motor Assembly | U0129 | X | X | |
ECM | - | - | X | |
Certification ECU (Smart Key ECU Assembly) | U0100 | X | X | |
U0142 | X | X | ||
U0155 | X | X | ||
U0293 | X | X | ||
V Bus | Combination Meter Assembly | U0100 | X | X |
U0129 | X | X | ||
U0131 | X | X | ||
U0142 | X | X | ||
U0151 | X | X | ||
U023A | X | X | ||
Power Management Control ECU (HV CPU) |
- | - | X | |
Power Management Control ECU (Power Management CPU) |
U0293 | X | X | |
Power Management Control ECU (Gateway Function) |
- | - | X | |
Steering Sensor | - | - | X | |
Telematics Transceiver | U0140 | X | ▲ | |
U0155 | X | ▲ | ||
U0163 | X | ▲ | ||
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | X | X |
U0200 | X | X | ||
U0208 | X | X | ||
U0230 | X | X | ||
U1002 | X | X | ||
U1115 | X | X | ||
Luggage Closer Motor Assembly | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | X | X | |
Outer Mirror Control ECU Assembly RH | U0142 | X | X | |
Front Power Seat Switch LH | - | - | - | |
Front Power Seat Switch RH | - | - | - | |
Multiplex Tilt and Telescopic ECU | U0142 | X | X | |
U0208 | X | X | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | X | X |
U0126 | X | X | ||
U0129 | X | X | ||
U0142 | X | X | ||
U0293 | X | X | ||
Driving Support ECU Assembly | U0125 | X | X | |
U0126 | X | X | ||
U0129 | X | X | ||
U0142 | X | X | ||
U0293 | X | X | ||
U1100 | X | X | ||
Sub Bus 11 | Lane Departure Warning Camera | U0101 | X | X |
U0123 | X | X | ||
U0129 | X | X | ||
U0142 | X | X | ||
U0155 | X | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | X | X | |
U0233 | X | X | ||
U023A | X | X | ||
U1002 | X | X | ||
U1100 | X | X | ||
Seat Belt Control ECU | U0129 | X | X | |
U0140 | X | X | ||
U0151 | X | X | ||
U1104 | X | X |
▲: DTC is likely to be output.
X: DTC is unlikely to be output.
-: DTC is not output.
- | Trouble Mode (Open in Both CAN Branch Lines) | |||||
---|---|---|---|---|---|---|
V Bus | ||||||
Output ECU | Output DTC | Center Airbag Sensor Communication Stop Mode (Click here) |
Air Conditioning Amplifier Communication Stop Mode (Click here) |
Multi-media Module Receiver Assembly Communication Stop Mode (Click here) |
Audio Receiver Assembly Communication Stop Mode (Click here) |
|
V Bus | Airbag Sensor Assembly | - | - | - | - | - |
Air Conditioning Amplifier Assembly | U0101 | - | ○ | - | - | |
U0131 | - | ○ | - | - | ||
U0142 | - | ○ | - | - | ||
U0155 | - | ○ | - | - | ||
U0163 | - | ○ | ○ | ○ | ||
U0293 | - | ○ | - | - | ||
V Bus | Multi-media Module Receiver Assembly | U0073 | - | - | ○ | - |
U0100 | - | - | ○ | - | ||
U0126 | - | - | ○ | - | ||
U0129 | - | - | ○ | - | ||
U0131 | - | - | ○ | - | ||
U0140 | - | - | ○ | - | ||
U0155 | - | - | ○ | - | ||
U0164 | - | ○ | ○ | - | ||
U0198 | - | - | ○ | - | ||
U0293 | - | - | ○ | - | ||
U1110 | - | - | ○ | - | ||
Radio Receiver Assembly | U0073 | - | - | - | ○ | |
U0100 | - | - | - | ○ | ||
U0129 | - | - | - | ○ | ||
U0140 | - | - | - | ○ | ||
U0155 | - | - | - | ○ | ||
U0164 | - | ○ | - | ○ | ||
U0293 | - | - | - | ○ | ||
U1110 | - | - | - | ○ | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | - | - | - | - | |
U0101 | - | - | - | - | ||
U0120 | - | - | - | - | ||
U0151 | ○ | - | - | - | ||
U0155 | - | - | - | - | ||
U0164 | - | ○ | - | - | ||
U0198 | - | - | - | - | ||
U0293 | - | - | - | - | ||
U0327 | - | - | - | - | ||
Clearance Warning ECU Assembly | U0101 | - | - | - | - | |
U0155 | - | - | - | - | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | ○ | - | - | - | |
U0123 | ○ | - | - | - | ||
U0124 | ○ | - | - | - | ||
U0126 | - | - | - | - | ||
U0293 | - | - | - | - | ||
Power Steering ECU with Motor Assembly | U0129 | - | - | - | - | |
ECM | - | - | - | - | - | |
V Bus | Certification ECU (Smart Key ECU Assembly) | U0100 | - | - | - | - |
U0142 | - | - | - | - | ||
U0155 | - | - | - | - | ||
U0293 | - | - | - | - | ||
Combination Meter Assembly | U0100 | - | - | - | - | |
U0129 | - | - | - | - | ||
U0131 | - | - | - | - | ||
U0142 | - | - | - | - | ||
U0151 | ○ | - | - | - | ||
U023A | - | - | - | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | - | - | - | - | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | - | |
Steering Sensor | - | - | - | - | - | |
Telematics Transceiver | U0140 | - | - | - | - | |
U0155 | - | - | - | - | ||
U0163 | - | - | ○ | - | ||
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | - | - | - | - |
U0200 | - | - | - | - | ||
U0208 | - | - | - | - | ||
U0230 | - | - | - | - | ||
U1002 | - | - | - | - | ||
U1115 | - | - | - | - | ||
Luggage Closer Motor Assembly | - | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | - | - | - | - | |
Outer Mirror Control ECU Assembly RH | U0142 | - | - | - | - | |
Front Power Seat Switch LH | - | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | - | |
Multiplex Tilt and Telescopic ECU | U0142 | - | - | - | - | |
U0208 | - | - | - | - | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | - | - | - | - |
U0126 | - | - | - | - | ||
U0129 | - | - | - | - | ||
U0142 | - | - | - | - | ||
U0293 | - | - | - | - | ||
Driving Support ECU Assembly | U0125 | ○ | - | - | - | |
U0126 | - | - | - | - | ||
U0129 | - | - | - | - | ||
U0142 | - | - | - | - | ||
U0293 | - | - | - | - | ||
U1100 | - | - | - | - | ||
Lane Departure Warning Camera | U0101 | - | - | - | - | |
U0123 | ○ | - | - | - | ||
U0129 | - | - | - | - | ||
U0142 | - | - | - | - | ||
U0155 | - | - | - | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | - | - | - | - | |
U0233 | - | - | - | - | ||
U023A | - | - | - | - | ||
U1002 | - | - | - | - | ||
U1100 | - | - | - | - | ||
Seat Belt Control ECU | U0129 | - | - | - | - | |
U0140 | - | - | - | - | ||
U0151 | ○ | - | - | - | ||
U1104 | - | - | - | - |
○: DTC is output.
-: DTC is not output.
- | Trouble Mode (Open in Both CAN Branch Lines) | |||||
---|---|---|---|---|---|---|
V Bus | ||||||
Output ECU | Output DTC | Main Body ECU Communication Stop Mode (Click here) |
Clearance Warning ECU Communication Stop Mode (Click here) |
Skid Control ECU Communication Stop Mode (Click here) |
Power Steering ECU Communication Stop Mode (Click here) |
|
V Bus | Airbag Sensor Assembly | - | - | - | - | - |
V Bus | Air Conditioning Amplifier Assembly | U0101 | - | - | - | - |
U0131 | - | - | - | ○ | ||
U0142 | ○ | - | - | - | ||
U0155 | - | - | - | - | ||
U0163 | - | - | - | - | ||
U0293 | - | - | - | - | ||
Multi-media Module Receiver Assembly | U0073 | - | - | - | - | |
U0100 | - | - | - | - | ||
U0126 | - | - | - | - | ||
U0129 | - | - | ○ | - | ||
U0131 | - | - | - | ○ | ||
U0140 | ○ | - | - | - | ||
U0155 | - | - | - | - | ||
U0164 | - | - | - | - | ||
U0198 | - | - | - | - | ||
U0293 | - | - | - | - | ||
U1110 | - | ○ | - | - | ||
Radio Receiver Assembly | U0073 | - | - | - | - | |
U0100 | - | - | - | - | ||
U0129 | - | - | ○ | - | ||
U0140 | ○ | - | - | - | ||
U0155 | - | - | - | - | ||
U0164 | - | - | - | - | ||
U0293 | - | - | - | - | ||
U1110 | - | ○ | - | - | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | ○ | - | - | - | |
U0101 | ○ | - | - | - | ||
U0120 | ○ | - | - | - | ||
U0151 | ○ | - | - | - | ||
U0155 | ○ | - | - | - | ||
U0164 | ○ | - | - | - | ||
U0198 | ○ | - | - | - | ||
U0293 | ○ | - | - | - | ||
U0327 | ○ | - | - | - | ||
Clearance Warning ECU Assembly | U0101 | - | ○ | - | - | |
U0155 | - | ○ | - | - | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | - | - | ○ | - | |
U0123 | - | - | ○ | - | ||
U0124 | - | - | ○ | - | ||
U0126 | - | - | ○ | - | ||
U0293 | - | - | ○ | - | ||
V Bus | Power Steering ECU with Motor Assembly | U0129 | - | - | ○ | ○ |
ECM | - | - | - | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | - | - | - | - | |
U0142 | ○ | - | - | - | ||
U0155 | - | - | - | - | ||
U0293 | - | - | - | - | ||
Combination Meter Assembly | U0100 | - | - | - | - | |
U0129 | - | - | ○ | - | ||
U0131 | - | - | - | ○ | ||
U0142 | ○ | - | - | - | ||
U0151 | - | - | - | - | ||
U023A | - | - | - | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | - | - | - | - | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | - | |
Steering Sensor | - | - | - | - | - | |
Telematics Transceiver | U0140 | ○ | - | - | - | |
U0155 | - | - | - | - | ||
U0163 | - | - | - | - | ||
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | - | - | - | - |
U0200 | - | - | - | - | ||
U0208 | - | - | - | - | ||
U0230 | - | - | - | - | ||
U1002 | - | - | - | - | ||
U1115 | - | - | - | - | ||
Luggage Closer Motor Assembly | - | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | - | - | - | - | |
Outer Mirror Control ECU Assembly RH | U0142 | - | - | - | - | |
Front Power Seat Switch LH | - | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | - | |
Sub Bus 1 | Multiplex Tilt and Telescopic ECU | U0142 | - | - | - | - |
U0208 | - | - | - | - | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | - | - | - | - |
U0126 | - | - | - | - | ||
U0129 | - | - | ○ | - | ||
U0142 | ○ | - | - | - | ||
U0293 | - | - | - | - | ||
Driving Support ECU Assembly | U0125 | - | - | - | - | |
U0126 | - | - | - | - | ||
U0129 | - | - | ○ | - | ||
U0142 | ○ | - | - | - | ||
U0293 | - | - | - | - | ||
U1100 | - | - | - | - | ||
Lane Departure Warning Camera | U0101 | - | - | - | - | |
U0123 | - | - | - | - | ||
U0129 | - | - | ○ | - | ||
U0142 | ○ | - | - | - | ||
U0155 | - | - | - | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | - | - | - | - | |
U0233 | - | - | - | - | ||
U023A | - | - | - | - | ||
U1002 | - | - | - | - | ||
U1100 | - | - | - | - | ||
Seat Belt Control ECU | U0129 | - | - | ○ | - | |
U0140 | ○ | - | - | - | ||
U0151 | - | - | - | - | ||
U1104 | - | - | - | - |
○: DTC is output.
-: DTC is not output.
- | Trouble Mode (Open in Both CAN Branch Lines) | ||||
---|---|---|---|---|---|
V Bus | |||||
Output ECU | Output DTC | Certification ECU Communication Stop Mode (Click here) |
Power Management Control ECU Communication Stop Mode (Click here) |
Steering Angle Sensor Communication Stop Mode (Click here) |
|
V Bus | Airbag Sensor Assembly | - | - | - | - |
Air Conditioning Amplifier Assembly | U0101 | - | ○ | - | |
U0131 | - | - | - | ||
U0142 | - | - | - | ||
U0155 | - | - | - | ||
U0163 | - | - | - | ||
U0293 | - | - | - | ||
Multi-media Module Receiver Assembly | U0073 | - | - | - | |
U0100 | - | ○ | - | ||
U0126 | - | - | ○ | ||
U0129 | - | - | - | ||
U0131 | - | - | - | ||
U0140 | - | - | - | ||
U0155 | - | - | - | ||
U0164 | - | - | - | ||
U0198 | - | - | - | ||
U0293 | - | ○ | - | ||
U1110 | - | - | - | ||
Radio Receiver Assembly | U0073 | - | - | - | |
U0100 | - | ○ | - | ||
U0129 | - | - | - | ||
U0140 | - | - | - | ||
U0155 | - | - | - | ||
U0164 | - | - | - | ||
U0293 | - | ○ | - | ||
U1110 | - | - | - | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | - | ○ | - | |
U0101 | - | ○ | - | ||
U0120 | - | ○ | - | ||
U0151 | - | - | - | ||
U0155 | - | - | - | ||
U0164 | - | - | - | ||
U0198 | - | - | - | ||
U0293 | - | ○ | - | ||
U0327 | ○ | - | - | ||
Clearance Warning ECU Assembly | U0101 | - | ○ | - | |
U0155 | - | - | - | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | - | - | ○ | |
U0123 | - | - | - | ||
U0124 | - | - | - | ||
U0126 | - | - | ○ | ||
U0293 | - | ○ | - | ||
V Bus | Power Steering ECU with Motor Assembly | U0129 | - | - | - |
ECM | - | - | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | ○ | ○ | - | |
U0142 | ○ | - | - | ||
U0155 | ○ | - | - | ||
U0293 | ○ | ○ | - | ||
Combination Meter Assembly | U0100 | - | - | - | |
U0129 | - | - | - | ||
U0131 | - | - | - | ||
U0142 | - | - | - | ||
U0151 | - | - | - | ||
U023A | - | ○ | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | - | ○ | - | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | |
Steering Sensor | - | - | - | - | |
Telematics Transceiver | U0140 | - | - | - | |
U0155 | - | - | - | ||
U0163 | - | - | - | ||
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | - | - | - |
U0200 | - | - | - | ||
U0208 | - | - | - | ||
U0230 | - | - | - | ||
U1002 | - | - | - | ||
U1115 | - | - | - | ||
Luggage Closer Motor Assembly | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | - | - | - | |
Outer Mirror Control ECU Assembly RH | U0142 | - | - | - | |
Front Power Seat Switch LH | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | |
Multiplex Tilt and Telescopic ECU | U0142 | - | - | - | |
U0208 | - | - | - | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | - | ○ | - |
U0126 | - | ○ | ○ | ||
U0129 | - | ○ | - | ||
U0142 | - | ○ | - | ||
U0293 | - | ○ | - | ||
Driving Support ECU Assembly | U0125 | - | ○ | - | |
U0126 | - | ○ | ○ | ||
U0129 | - | ○ | - | ||
U0142 | - | ○ | - | ||
U0293 | - | ○ | - | ||
U1100 | - | - | - | ||
Lane Departure Warning Camera | U0101 | - | ○ | - | |
U0123 | - | ○ | - | ||
U0129 | - | ○ | - | ||
U0142 | - | ○ | - | ||
U0155 | - | ○ | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | - | - | - | |
U0233 | - | - | - | ||
U023A | - | - | - | ||
U1002 | - | - | - | ||
U1100 | - | - | - | ||
Seat Belt Control ECU | U0129 | - | ○ | - | |
U0140 | - | ○ | - | ||
U0151 | - | ○ | - | ||
U1104 | - | - | - |
○: DTC is output.
-: DTC is not output.
- | Trouble Mode (Open in Both CAN Branch Lines) | |||
---|---|---|---|---|
V Bus | ||||
Output ECU | Output DTC | DLC3 | DCM Communication Stop Mode (Click here) |
|
V Bus | Airbag Sensor Assembly | - | - | - |
Air Conditioning Amplifier Assembly | U0101 | - | - | |
U0131 | - | - | ||
U0142 | - | - | ||
U0155 | - | - | ||
U0163 | - | - | ||
U0293 | - | - | ||
V Bus | Multi-media Module Receiver Assembly | U0073 | - | - |
U0100 | - | - | ||
U0126 | - | - | ||
U0129 | - | - | ||
U0131 | - | - | ||
U0140 | - | - | ||
U0155 | - | - | ||
U0164 | - | - | ||
U0198 | - | - | ||
U0293 | - | - | ||
U1110 | - | - | ||
Radio Receiver Assembly | U0073 | - | - | |
U0100 | - | - | ||
U0129 | - | - | ||
U0140 | - | - | ||
U0155 | - | - | ||
U0164 | - | - | ||
U0293 | - | - | ||
U1110 | - | - | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | - | - | |
U0101 | - | - | ||
U0120 | - | - | ||
U0151 | - | - | ||
U0155 | - | - | ||
U0164 | - | - | ||
U0198 | - | - | ||
U0293 | - | - | ||
U0327 | - | - | ||
Clearance Warning ECU Assembly | U0101 | - | - | |
U0155 | - | - | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | - | - | |
U0123 | - | - | ||
U0124 | - | - | ||
U0126 | - | - | ||
U0293 | - | - | ||
Power Steering ECU with Motor Assembly | U0129 | - | - | |
ECM | - | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | - | - | |
U0142 | - | - | ||
U0155 | - | - | ||
U0293 | - | - | ||
V Bus | Combination Meter Assembly | U0100 | - | - |
U0129 | - | - | ||
U0131 | - | - | ||
U0142 | - | - | ||
U0151 | - | - | ||
U023A | - | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | - | - | |
Power Management Control ECU (Gateway Function) |
- | - | - | |
Steering Sensor | - | - | - | |
Telematics Transceiver | U0140 | - | ○ | |
U0155 | - | ○ | ||
U0163 | - | ○ | ||
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | - | - |
U0200 | - | - | ||
U0208 | - | - | ||
U0230 | - | - | ||
U1002 | - | - | ||
U1115 | - | - | ||
Luggage Closer Motor Assembly | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | - | - | |
Outer Mirror Control ECU Assembly RH | U0142 | - | - | |
Front Power Seat Switch LH | - | - | - | |
Front Power Seat Switch RH | - | - | - | |
Multiplex Tilt and Telescopic ECU | U0142 | - | - | |
U0208 | - | - | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | - | - |
U0126 | - | - | ||
U0129 | - | - | ||
U0142 | - | - | ||
U0293 | - | - | ||
Driving Support ECU Assembly | U0125 | - | - | |
U0126 | - | - | ||
U0129 | - | - | ||
U0142 | - | - | ||
U0293 | - | - | ||
U1100 | - | - | ||
Sub Bus 11 | Lane Departure Warning Camera | U0101 | - | - |
U0123 | - | - | ||
U0129 | - | - | ||
U0142 | - | - | ||
U0155 | - | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | - | - | |
U0233 | - | - | ||
U023A | - | - | ||
U1002 | - | - | ||
U1100 | - | - | ||
Seat Belt Control ECU | U0129 | - | - | |
U0140 | - | - | ||
U0151 | - | - | ||
U1104 | - | - |
○: DTC is output.
-: DTC is not output.
- | Trouble Mode (Open in One CAN Main Bus Line) | ||||
---|---|---|---|---|---|
V Bus | |||||
Output ECU | Output DTC | Combination Meter ECU Communication Stop Mode (Click here) |
CAN J/C LH1 to CAN J/C RH1 | ECM Communication Stop Mode (Click here) |
|
V Bus | Airbag Sensor Assembly | - | - | - | - |
Air Conditioning Amplifier Assembly | U0101 | X | ▲ | X | |
U0131 | X | X | X | ||
U0142 | X | ▲ | X | ||
U0155 | ▲ | ▲ | X | ||
U0163 | X | X | X | ||
U0293 | X | X | ▲ | ||
Multi-media Module Receiver Assembly | U0073 | X | X | X | |
U0100 | X | ▲ | ▲ | ||
U0126 | X | ▲ | X | ||
U0129 | X | ▲ | X | ||
U0131 | X | X | X | ||
U0140 | X | ▲ | X | ||
U0155 | ▲ | ▲ | X | ||
U0164 | X | ▲ | X | ||
U0198 | X | ▲ | X | ||
U0293 | X | ▲ | X | ||
U1110 | X | X | X | ||
Radio Receiver Assembly | U0073 | X | X | X | |
U0100 | X | ▲ | X | ||
U0129 | X | ▲ | X | ||
U0140 | X | ▲ | X | ||
U0155 | ▲ | ▲ | X | ||
U0164 | X | ▲ | X | ||
U0293 | X | ▲ | X | ||
U1110 | X | X | X | ||
V Bus | Main Body ECU (Multiplex Network Body ECU) | U0100 | X | ▲ | ▲ |
U0101 | X | X | X | ||
U0120 | X | X | X | ||
U0151 | X | ▲ | X | ||
U0155 | ▲ | X | X | ||
U0164 | X | ▲ | X | ||
U0198 | X | X | X | ||
U0293 | X | X | X | ||
U0327 | X | ▲ | X | ||
Clearance Warning ECU Assembly | U0101 | X | ▲ | X | |
U0155 | ▲ | ▲ | X | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | X | ▲ | X | |
U0123 | X | ▲ | X | ||
U0124 | X | ▲ | X | ||
U0126 | X | X | X | ||
U0293 | X | X | X | ||
Power Steering ECU with Motor Assembly | U0129 | X | ▲ | X | |
ECM | - | - | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | X | ▲ | X | |
U0142 | X | ▲ | X | ||
U0155 | ▲ | ▲ | X | ||
U0293 | X | ▲ | X | ||
Combination Meter Assembly | U0100 | ▲ | ▲ | ▲ | |
U0129 | ▲ | X | X | ||
U0131 | ▲ | ▲ | X | ||
U0142 | ▲ | X | X | ||
U0151 | ▲ | ▲ | X | ||
U023A | ▲ | X | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | X | X | X | |
V Bus | Power Management Control ECU (Gateway Function) |
- | - | - | - |
Steering Sensor | - | - | - | - | |
Telematics Transceiver | U0140 | X | ▲ | X | |
U0155 | X | ▲ | X | ||
U0163 | X | ▲ | X | ||
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | X | X | X |
U0200 | X | X | X | ||
U0208 | X | X | X | ||
U0230 | X | X | X | ||
U1002 | X | X | X | ||
U1115 | X | X | X | ||
Luggage Closer Motor Assembly | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | X | X | X | |
Outer Mirror Control ECU Assembly RH | U0142 | X | X | X | |
Front Power Seat Switch LH | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | |
Multiplex Tilt and Telescopic ECU | U0142 | X | X | X | |
U0208 | X | X | X | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | X | X | X |
U0126 | X | X | X | ||
U0129 | X | X | X | ||
U0142 | X | X | X | ||
U0293 | X | X | X | ||
Driving Support ECU Assembly | U0125 | X | ▲ | X | |
U0126 | X | X | X | ||
U0129 | X | X | X | ||
U0142 | X | X | X | ||
U0293 | X | X | X | ||
U1100 | X | X | X | ||
Lane Departure Warning Camera | U0101 | X | X | X | |
U0123 | X | ▲ | X | ||
U0129 | X | X | X | ||
U0142 | X | X | X | ||
U0155 | ▲ | X | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | |
Sub Bus 11 | Power Management Control ECU (Gateway Function) |
U0104 | X | X | X |
U0233 | X | X | X | ||
U023A | X | X | X | ||
U1002 | X | X | X | ||
U1100 | X | X | X | ||
Seat Belt Control ECU | U0129 | X | X | X | |
U0140 | X | X | X | ||
U0151 | X | ▲ | X | ||
U1104 | X | X | X |
▲: DTC is likely to be output.
X: DTC is unlikely to be output.
-: DTC is not output.
- | Trouble Mode (Open in Both CAN Main Bus Lines) | ||||
---|---|---|---|---|---|
V Bus | |||||
Output ECU | Output DTC | Combination Meter ECU Communication Stop Mode (Click here) |
CAN J/C LH1 to CAN J/C RH1 | ECM Communication Stop Mode (Click here) |
|
V Bus | Airbag Sensor Assembly | - | - | - | - |
Air Conditioning Amplifier Assembly | U0101 | - | ○ | - | |
U0131 | - | - | - | ||
U0142 | - | ○ | - | ||
U0155 | ○ | ○ | - | ||
U0163 | - | - | - | ||
U0293 | - | - | ○ | ||
Multi-media Module Receiver Assembly | U0073 | - | - | - | |
U0100 | - | ○ | ○ | ||
U0126 | - | ○ | - | ||
U0129 | - | ○ | - | ||
U0131 | - | - | - | ||
U0140 | - | ○ | - | ||
U0155 | ○ | ○ | - | ||
U0164 | - | ○ | - | ||
U0198 | - | ○ | - | ||
U0293 | - | ○ | - | ||
U1110 | - | - | - | ||
Radio Receiver Assembly | U0073 | - | - | - | |
U0100 | - | ○ | - | ||
U0129 | - | ○ | - | ||
U0140 | - | ○ | - | ||
U0155 | ○ | ○ | - | ||
U0164 | - | ○ | - | ||
U0293 | - | ○ | - | ||
U1110 | - | - | - | ||
V Bus | Main Body ECU (Multiplex Network Body ECU) | U0100 | - | ○ | ○ |
U0101 | - | - | - | ||
U0120 | - | - | - | ||
U0151 | - | ○ | - | ||
U0155 | ○ | - | - | ||
U0164 | - | ○ | - | ||
U0198 | - | - | - | ||
U0293 | - | - | - | ||
U0327 | - | ○ | - | ||
Clearance Warning ECU Assembly | U0101 | - | ○ | - | |
U0155 | ○ | ○ | - | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | - | ○ | - | |
U0123 | - | ○ | - | ||
U0124 | - | ○ | - | ||
U0126 | - | - | - | ||
U0293 | - | - | - | ||
Power Steering ECU with Motor Assembly | U0129 | - | ○ | - | |
ECM | - | - | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | - | ○ | - | |
U0142 | - | ○ | - | ||
U0155 | ○ | ○ | - | ||
U0293 | - | ○ | - | ||
Combination Meter Assembly | U0100 | ○ | ○ | ○ | |
U0129 | ○ | - | - | ||
U0131 | ○ | ○ | - | ||
U0142 | ○ | - | - | ||
U0151 | ○ | ○ | - | ||
U023A | ○ | - | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | - | - | - | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | |
Steering Sensor | - | - | - | - | |
Telematics Transceiver | U0140 | - | ○ | - | |
U0155 | ○ | ○ | - | ||
U0163 | - | ○ | - | ||
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | - | - | - |
U0200 | - | - | - | ||
U0208 | - | - | - | ||
U0230 | - | - | - | ||
U1002 | - | - | - | ||
U1115 | - | - | - | ||
Luggage Closer Motor Assembly | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | - | - | - | |
Outer Mirror Control ECU Assembly RH | U0142 | - | - | - | |
Front Power Seat Switch LH | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | |
Multiplex Tilt and Telescopic ECU | U0142 | - | - | - | |
U0208 | - | - | - | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | - | - | - |
U0126 | - | - | - | ||
U0129 | - | - | - | ||
U0142 | - | - | - | ||
U0293 | - | - | - | ||
Driving Support ECU Assembly | U0125 | - | ○ | - | |
U0126 | - | - | - | ||
U0129 | - | - | - | ||
U0142 | - | - | - | ||
U0293 | - | - | - | ||
U1100 | - | - | - | ||
Lane Departure Warning Camera | U0101 | - | - | - | |
U0123 | - | ○ | - | ||
U0129 | - | - | - | ||
U0142 | - | - | - | ||
U0155 | ○ | - | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | - | - | - | |
U0233 | - | - | - | ||
U023A | - | - | - | ||
U1002 | - | - | - | ||
U1100 | - | - | - | ||
Sub Bus 11 | Seat Belt Control ECU | U0129 | - | - | - |
U0140 | - | - | - | ||
U0151 | - | ○ | - | ||
U1104 | - | - | - |
○: DTC is output.
-: DTC is not output.
- | Trouble Mode (CAN Bus Line Short Circuit or Short to GND) | ||
---|---|---|---|
V Bus | |||
Output ECU | Output DTC | CANH - CANL CANH - Ground Short CANL - Ground Short |
|
V Bus | Airbag Sensor Assembly | - | - |
Air Conditioning Amplifier Assembly | U0101 | ○ | |
U0131 | ○ | ||
U0142 | ○ | ||
U0155 | ○ | ||
U0163 | ○ | ||
U0293 | ○ | ||
Multi-media Module Receiver Assembly | U0073 | ○ | |
U0100 | ○ | ||
U0126 | ○ | ||
U0129 | ○ | ||
U0131 | ○ | ||
U0140 | ○ | ||
U0155 | ○ | ||
U0164 | ○ | ||
U0198 | ○ | ||
U0293 | ○ | ||
U1110 | ○ | ||
Radio Receiver Assembly | U0073 | ○ | |
U0100 | ○ | ||
U0129 | ○ | ||
U0140 | ○ | ||
U0155 | ○ | ||
U0164 | ○ | ||
U0293 | ○ | ||
U1110 | ○ | ||
V Bus | Main Body ECU (Multiplex Network Body ECU) | U0100 | ○ |
U0101 | ○ | ||
U0120 | ○ | ||
U0151 | ○ | ||
U0155 | ○ | ||
U0164 | ○ | ||
U0198 | ○ | ||
U0293 | ○ | ||
U0327 | ○ | ||
Clearance Warning ECU Assembly | U0101 | ○ | |
U0155 | ○ | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | ○ | |
U0123 | ○ | ||
U0124 | ○ | ||
U0126 | ○ | ||
U0293 | ○ | ||
Power Steering ECU with Motor Assembly | U0129 | ○ | |
ECM | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | ○ | |
U0142 | ○ | ||
U0155 | ○ | ||
U0293 | ○ | ||
Combination Meter Assembly | U0100 | ○ | |
U0129 | ○ | ||
U0131 | ○ | ||
U0142 | ○ | ||
U0151 | ○ | ||
U023A | ○ | ||
Power Management Control ECU (HV CPU) |
- | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | ○ | |
Power Management Control ECU (Gateway Function) |
- | - | |
Steering Sensor | - | - | |
Telematics Transceiver | U0140 | ○ | |
U0155 | ○ | ||
U0163 | ○ | ||
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | - |
U0200 | - | ||
U0208 | - | ||
U0230 | - | ||
U1002 | - | ||
U1115 | - | ||
Luggage Closer Motor Assembly | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | - | |
Outer Mirror Control ECU Assembly RH | U0142 | - | |
Front Power Seat Switch LH | - | - | |
Front Power Seat Switch RH | - | - | |
Multiplex Tilt and Telescopic ECU | U0142 | - | |
U0208 | - | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | ○ |
U0126 | ○ | ||
U0129 | ○ | ||
U0142 | ○ | ||
U0293 | ○ | ||
Driving Support ECU Assembly | U0125 | ○ | |
U0126 | ○ | ||
U0129 | ○ | ||
U0142 | ○ | ||
U0293 | ○ | ||
U1100 | - | ||
Lane Departure Warning Camera | U0101 | ○ | |
U0123 | ○ | ||
U0129 | ○ | ||
U0142 | ○ | ||
U0155 | ○ | ||
Power Management Control ECU (HV CPU) |
- | - | |
Power Management Control ECU (Power Management CPU) |
- | - | |
Power Management Control ECU (Gateway Function) |
U0104 | - | |
U0233 | - | ||
U023A | - | ||
U1002 | - | ||
U1100 | - | ||
Sub Bus 11 | Seat Belt Control ECU | U0129 | ○ |
U0140 | ○ | ||
U0151 | ○ | ||
U1104 | - |
○: DTC is output.
-: DTC is not output.
DTC COMBINATION TABLE (OPEN IN CAN BRANCH OF SUB BUS 1, PAST COMMUNICATION ERROR) (for LHD)
Regarding a past communication error of an ECU and sensor connected to sub bus 1 (in this case, normal is displayed when performing the CAN bus check, but communication DTCs are output), determine the part that had a malfunction based on DTCs output from the main body ECU (multiplex network body ECU).
As gateway function equipped ECUs (sub bus monitor ECUs) monitor signals from all ECUs that are connected to sub buses, gateway function equipped ECUs can detect ECUs with a communication stop more accurately.
DTCs output from ECUs other than the main body ECU (multiplex network body ECU) (gateway function equipped ECU) are shown only as a reference.
Regarding a communication stop that is currently occurring in sub bus 1, the malfunctioning part can be confirmed easily by performing the CAN bus check using the GTS.
If an open occurs in just one of the lines of a CAN branch, DTCs which are not related to malfunctioning parts may be output (DTCs may be displayed randomly), or a message indicating a communication error may be displayed.
- | Trouble Mode (Open in One CAN Branch Line) | ||||
---|---|---|---|---|---|
Sub Bus 1 | |||||
Output ECU | Output DTC | Luggage Closer Motor Assembly (Click here) |
Outer Mirror Control ECU Assembly LH (Click here) |
Outer Mirror Control ECU Assembly RH (Click here) |
|
V Bus | Airbag Sensor Assembly | - | - | - | - |
V Bus | Air Conditioning Amplifier Assembly | U0101 | X | X | X |
U0131 | X | X | X | ||
U0142 | X | X | X | ||
U0155 | X | X | X | ||
U0163 | X | X | X | ||
U0293 | X | X | X | ||
Multi-media Module Receiver Assembly | U0073 | X | X | X | |
U0100 | X | X | X | ||
U0126 | X | X | X | ||
U0129 | X | X | X | ||
U0131 | X | X | X | ||
U0140 | X | X | X | ||
U0155 | X | X | X | ||
U0164 | X | X | X | ||
U0198 | X | X | X | ||
U0293 | X | X | X | ||
U1110 | X | X | X | ||
Radio Receiver Assembly | U0073 | X | X | X | |
U0100 | X | X | X | ||
U0129 | X | X | X | ||
U0140 | X | X | X | ||
U0155 | X | X | X | ||
U0164 | X | X | X | ||
U0293 | X | X | X | ||
U1110 | X | X | X | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | X | X | X | |
U0101 | X | X | X | ||
U0120 | X | X | X | ||
U0151 | X | X | X | ||
U0155 | X | X | X | ||
U0164 | X | X | X | ||
U0198 | X | X | X | ||
U0293 | X | X | X | ||
U0327 | X | X | X | ||
Clearance Warning ECU Assembly | U0101 | X | X | X | |
U0155 | X | X | X | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | X | X | X | |
U0123 | X | X | X | ||
U0124 | X | X | X | ||
U0126 | X | X | X | ||
U0293 | X | X | X | ||
Power Steering ECU with Motor Assembly | U0129 | X | X | X | |
ECM | - | - | - | - | |
V Bus | Certification ECU (Smart Key ECU Assembly) | U0100 | X | X | X |
U0142 | X | X | X | ||
U0155 | X | X | X | ||
U0293 | X | X | X | ||
Combination Meter Assembly | U0100 | X | X | X | |
U0129 | X | X | X | ||
U0131 | X | X | X | ||
U0142 | X | X | X | ||
U0151 | X | X | X | ||
U023A | X | X | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | X | X | X | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | |
Steering Sensor | - | - | - | - | |
Telematics Transceiver | U0140 | X | X | X | |
U0155 | X | X | X | ||
U0163 | X | X | X | ||
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | X | X | ▲ |
U0200 | X | ▲ | X | ||
U0208 | X | X | X | ||
U0230 | ▲ | X | X | ||
U1002 | X | X | X | ||
U1115 | X | X | X | ||
Luggage Closer Motor Assembly | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | X | ▲ | X | |
Outer Mirror Control ECU Assembly RH | U0142 | X | X | ▲ | |
Front Power Seat Switch LH | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | |
Multiplex Tilt and Telescopic ECU | U0142 | X | X | X | |
U0208 | X | X | X | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | X | X | X |
U0126 | X | X | X | ||
U0129 | X | X | X | ||
U0142 | X | X | X | ||
U0293 | X | X | X | ||
Sub Bus 11 | Driving Support ECU Assembly | U0125 | X | X | X |
U0126 | X | X | X | ||
U0129 | X | X | X | ||
U0142 | X | X | X | ||
U0293 | X | X | X | ||
U1100 | X | X | X | ||
Lane Departure Warning Camera | U0101 | X | X | X | |
U0123 | X | X | X | ||
U0129 | X | X | X | ||
U0142 | X | X | X | ||
U0155 | X | X | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | X | X | X | |
U0233 | X | X | X | ||
U023A | X | X | X | ||
U1002 | X | X | X | ||
U1100 | X | X | X | ||
Seat Belt Control ECU | U0129 | X | X | X | |
U0140 | X | X | X | ||
U0151 | X | X | X | ||
U1104 | X | X | X |
▲: DTC is likely to be output.
X: DTC is unlikely to be output.
-: DTC is not output.
- | Trouble Mode (Open in One CAN Branch Line) | ||||
---|---|---|---|---|---|
Sub Bus 1 | |||||
Output ECU | Output DTC | Front Power Seat Switch LH (Click here) |
Front Power Seat Switch RH (Click here) |
Multiplex Tilt and Telescopic ECU (Click here) |
|
V Bus | Airbag Sensor Assembly | - | - | - | - |
Air Conditioning Amplifier Assembly | U0101 | X | X | X | |
U0131 | X | X | X | ||
U0142 | X | X | X | ||
U0155 | X | X | X | ||
U0163 | X | X | X | ||
U0293 | X | X | X | ||
V Bus | Multi-media Module Receiver Assembly | U0073 | X | X | X |
U0100 | X | X | X | ||
U0126 | X | X | X | ||
U0129 | X | X | X | ||
U0131 | X | X | X | ||
U0140 | X | X | X | ||
U0155 | X | X | X | ||
U0164 | X | X | X | ||
U0198 | X | X | X | ||
U0293 | X | X | X | ||
U1110 | X | X | X | ||
Radio Receiver Assembly | U0073 | X | X | X | |
U0100 | X | X | X | ||
U0129 | X | X | X | ||
U0140 | X | X | X | ||
U0155 | X | X | X | ||
U0164 | X | X | X | ||
U0293 | X | X | X | ||
U1110 | X | X | X | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | X | X | X | |
U0101 | X | X | X | ||
U0120 | X | X | X | ||
U0151 | X | X | X | ||
U0155 | X | X | X | ||
U0164 | X | X | X | ||
U0198 | X | X | X | ||
U0293 | X | X | X | ||
U0327 | X | X | X | ||
Clearance Warning ECU Assembly | U0101 | X | X | X | |
U0155 | X | X | X | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | X | X | X | |
U0123 | X | X | X | ||
U0124 | X | X | X | ||
U0126 | X | X | X | ||
U0293 | X | X | X | ||
Power Steering ECU with Motor Assembly | U0129 | X | X | X | |
ECM | - | - | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | X | X | X | |
U0142 | X | X | X | ||
U0155 | X | X | X | ||
U0293 | X | X | X | ||
V Bus | Combination Meter Assembly | U0100 | X | X | X |
U0129 | X | X | X | ||
U0131 | X | X | X | ||
U0142 | X | X | X | ||
U0151 | X | X | X | ||
U023A | X | X | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | X | X | X | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | |
Steering Sensor | - | - | - | - | |
Telematics Transceiver | U0140 | X | X | X | |
U0155 | X | X | X | ||
U0163 | X | X | X | ||
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | X | X | X |
U0200 | X | X | X | ||
U0208 | ▲ | X | X | ||
U0230 | X | X | X | ||
U1002 | X | X | X | ||
U1115 | X | X | ▲ | ||
Luggage Closer Motor Assembly | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | X | X | X | |
Outer Mirror Control ECU Assembly RH | U0142 | X | X | X | |
Front Power Seat Switch LH | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | |
Multiplex Tilt and Telescopic ECU | U0142 | X | X | ▲ | |
U0208 | ▲ | X | ▲ | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | X | X | X |
U0126 | X | X | X | ||
U0129 | X | X | X | ||
U0142 | X | X | X | ||
U0293 | X | X | X | ||
Driving Support ECU Assembly | U0125 | X | X | X | |
U0126 | X | X | X | ||
U0129 | X | X | X | ||
U0142 | X | X | X | ||
U0293 | X | X | X | ||
U1100 | X | X | X | ||
Sub Bus 11 | Lane Departure Warning Camera | U0101 | X | X | X |
U0123 | X | X | X | ||
U0129 | X | X | X | ||
U0142 | X | X | X | ||
U0155 | X | X | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | X | X | X | |
U0233 | X | X | X | ||
U023A | X | X | X | ||
U1002 | X | X | X | ||
U1100 | X | X | X | ||
Seat Belt Control ECU | U0129 | X | X | X | |
U0140 | X | X | X | ||
U0151 | X | X | X | ||
U1104 | X | X | X |
▲: DTC is likely to be output.
X: DTC is unlikely to be output.
-: DTC is not output.
- | Trouble Mode (Open in Both CAN Branch Lines) | ||||
---|---|---|---|---|---|
Sub Bus 1 | |||||
Output ECU | Output DTC | Luggage Closer Motor Assembly (Click here) |
Outer Mirror Control ECU Assembly LH (Click here) |
Outer Mirror Control ECU Assembly RH (Click here) |
|
V Bus | Airbag Sensor Assembly | - | - | - | - |
Air Conditioning Amplifier Assembly | U0101 | - | - | - | |
U0131 | - | - | - | ||
U0142 | - | - | - | ||
U0155 | - | - | - | ||
U0163 | - | - | - | ||
U0293 | - | - | - | ||
V Bus | Multi-media Module Receiver Assembly | U0073 | - | - | - |
U0100 | - | - | - | ||
U0126 | - | - | - | ||
U0129 | - | - | - | ||
U0131 | - | - | - | ||
U0140 | - | - | - | ||
U0155 | - | - | - | ||
U0164 | - | - | - | ||
U0198 | - | - | - | ||
U0293 | - | - | - | ||
U1110 | - | - | - | ||
Radio Receiver Assembly | U0073 | - | - | - | |
U0100 | - | - | - | ||
U0129 | - | - | - | ||
U0140 | - | - | - | ||
U0155 | - | - | - | ||
U0164 | - | - | - | ||
U0293 | - | - | - | ||
U1110 | - | - | - | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | - | - | - | |
U0101 | - | - | - | ||
U0120 | - | - | - | ||
U0151 | - | - | - | ||
U0155 | - | - | - | ||
U0164 | - | - | - | ||
U0198 | - | - | - | ||
U0293 | - | - | - | ||
U0327 | - | - | - | ||
Clearance Warning ECU Assembly | U0101 | - | - | - | |
U0155 | - | - | - | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | - | - | - | |
U0123 | - | - | - | ||
U0124 | - | - | - | ||
U0126 | - | - | - | ||
U0293 | - | - | - | ||
Power Steering ECU with Motor Assembly | U0129 | - | - | - | |
ECM | - | - | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | - | - | - | |
U0142 | - | - | - | ||
U0155 | - | - | - | ||
U0293 | - | - | - | ||
V Bus | Combination Meter Assembly | U0100 | - | - | - |
U0129 | - | - | - | ||
U0131 | - | - | - | ||
U0142 | - | - | - | ||
U0151 | - | - | - | ||
U023A | - | - | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | - | - | - | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | |
Steering Sensor | - | - | - | - | |
Telematics Transceiver | U0140 | - | - | - | |
U0155 | - | - | - | ||
U0163 | - | - | - | ||
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | - | - | ○ |
U0200 | - | ○ | - | ||
U0208 | - | - | - | ||
U0230 | ○ | - | - | ||
U1002 | - | - | - | ||
U1115 | - | - | - | ||
Luggage Closer Motor Assembly | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | - | ○ | - | |
Outer Mirror Control ECU Assembly RH | U0142 | - | - | ○ | |
Front Power Seat Switch LH | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | |
Multiplex Tilt and Telescopic ECU | U0142 | - | - | - | |
U0208 | - | - | - | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | - | - | - |
U0126 | - | - | - | ||
U0129 | - | - | - | ||
U0142 | - | - | - | ||
U0293 | - | - | - | ||
Driving Support ECU Assembly | U0125 | - | - | - | |
U0126 | - | - | - | ||
U0129 | - | - | - | ||
U0142 | - | - | - | ||
U0293 | - | - | - | ||
U1100 | - | - | - | ||
Sub Bus 11 | Lane Departure Warning Camera | U0101 | - | - | - |
U0123 | - | - | - | ||
U0129 | - | - | - | ||
U0142 | - | - | - | ||
U0155 | - | - | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | - | - | - | |
U0233 | - | - | - | ||
U023A | - | - | - | ||
U1002 | - | - | - | ||
U1100 | - | - | - | ||
Seat Belt Control ECU | U0129 | - | - | - | |
U0140 | - | - | - | ||
U0151 | - | - | - | ||
U1104 | - | - | - |
○: DTC is output.
-: DTC is not output.
- | Trouble Mode (Open in Both CAN Branch Lines) | ||||
---|---|---|---|---|---|
Sub Bus 1 | |||||
Output ECU | Output DTC | Front Power Seat Switch LH (Click here) |
Front Power Seat Switch RH (Click here) |
Multiplex Tilt and Telescopic ECU (Click here) |
|
V Bus | Airbag Sensor Assembly | - | - | - | - |
Air Conditioning Amplifier Assembly | U0101 | - | - | - | |
U0131 | - | - | - | ||
U0142 | - | - | - | ||
U0155 | - | - | - | ||
U0163 | - | - | - | ||
U0293 | - | - | - | ||
Multi-media Module Receiver Assembly | U0073 | - | - | - | |
U0100 | - | - | - | ||
U0126 | - | - | - | ||
U0129 | - | - | - | ||
U0131 | - | - | - | ||
U0140 | - | - | - | ||
U0155 | - | - | - | ||
U0164 | - | - | - | ||
U0198 | - | - | - | ||
U0293 | - | - | - | ||
U1110 | - | - | - | ||
V Bus | Radio Receiver Assembly | U0073 | - | - | - |
U0100 | - | - | - | ||
U0129 | - | - | - | ||
U0140 | - | - | - | ||
U0155 | - | - | - | ||
U0164 | - | - | - | ||
U0293 | - | - | - | ||
U1110 | - | - | - | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | - | - | - | |
U0101 | - | - | - | ||
U0120 | - | - | - | ||
U0151 | - | - | - | ||
U0155 | - | - | - | ||
U0164 | - | - | - | ||
U0198 | - | - | - | ||
U0293 | - | - | - | ||
U0327 | - | - | - | ||
Clearance Warning ECU Assembly | U0101 | - | - | - | |
U0155 | - | - | - | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | - | - | - | |
U0123 | - | - | - | ||
U0124 | - | - | - | ||
U0126 | - | - | - | ||
U0293 | - | - | - | ||
Power Steering ECU with Motor Assembly | U0129 | - | - | - | |
ECM | - | - | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | - | - | - | |
U0142 | - | - | - | ||
U0155 | - | - | - | ||
U0293 | - | - | - | ||
Combination Meter Assembly | U0100 | - | - | - | |
U0129 | - | - | - | ||
U0131 | - | - | - | ||
U0142 | - | - | - | ||
U0151 | - | - | - | ||
U023A | - | - | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | - | - | - | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | |
Steering Sensor | - | - | - | - | |
V Bus | Telematics Transceiver | U0140 | - | - | - |
U0155 | - | - | - | ||
U0163 | - | - | - | ||
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | - | - | - |
U0200 | - | - | - | ||
U0208 | ○ | - | - | ||
U0230 | - | - | - | ||
U1002 | - | - | - | ||
U1115 | - | - | ○ | ||
Luggage Closer Motor Assembly | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | - | - | - | |
Outer Mirror Control ECU Assembly RH | U0142 | - | - | - | |
Front Power Seat Switch LH | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | |
Multiplex Tilt and Telescopic ECU | U0142 | - | - | ○ | |
U0208 | ○ | - | ○ | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | - | - | - |
U0126 | - | - | - | ||
U0129 | - | - | - | ||
U0142 | - | - | - | ||
U0293 | - | - | - | ||
Driving Support ECU Assembly | U0125 | - | - | - | |
U0126 | - | - | - | ||
U0129 | - | - | - | ||
U0142 | - | - | - | ||
U0293 | - | - | - | ||
U1100 | - | - | - | ||
Lane Departure Warning Camera | U0101 | - | - | - | |
U0123 | - | - | - | ||
U0129 | - | - | - | ||
U0142 | - | - | - | ||
U0155 | - | - | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | - | - | - | |
U0233 | - | - | - | ||
U023A | - | - | - | ||
U1002 | - | - | - | ||
U1100 | - | - | - | ||
Sub Bus 11 | Seat Belt Control ECU | U0129 | - | - | - |
U0140 | - | - | - | ||
U0151 | - | - | - | ||
U1104 | - | - | - |
○: DTC is output.
-: DTC is not output.
- | Trouble Mode (Open in One CAN Main Bus Line) | ||||
---|---|---|---|---|---|
Sub Bus 1 | |||||
Output ECU | Output DTC | Main Body ECU (Multiplex Network Body ECU) (Click here) |
CAN J/C LH2 to CAN J/C RH2 | CAN J/C RH2 to CAN No. 2 J/C | |
V Bus | Airbag Sensor Assembly | - | - | - | - |
Air Conditioning Amplifier Assembly | U0101 | X | X | X | |
U0131 | X | X | X | ||
U0142 | X | X | X | ||
U0155 | X | X | X | ||
U0163 | X | X | X | ||
U0293 | X | X | X | ||
Multi-media Module Receiver Assembly | U0073 | X | X | X | |
U0100 | X | X | X | ||
U0126 | X | X | X | ||
U0129 | X | X | X | ||
U0131 | X | X | X | ||
U0140 | X | X | X | ||
U0155 | X | X | X | ||
U0164 | X | X | X | ||
U0198 | X | X | X | ||
U0293 | X | X | X | ||
U1110 | X | X | X | ||
Radio Receiver Assembly | U0073 | X | X | X | |
U0100 | X | X | X | ||
U0129 | X | X | X | ||
U0140 | X | X | X | ||
U0155 | X | X | X | ||
U0164 | X | X | X | ||
U0293 | X | X | X | ||
U1110 | X | X | X | ||
V Bus | Main Body ECU (Multiplex Network Body ECU) | U0100 | X | X | X |
U0101 | X | X | X | ||
U0120 | X | X | X | ||
U0151 | X | X | X | ||
U0155 | X | X | X | ||
U0164 | X | X | X | ||
U0198 | X | X | X | ||
U0293 | X | X | X | ||
U0327 | X | X | X | ||
Clearance Warning ECU Assembly | U0101 | X | X | X | |
U0155 | X | X | X | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | X | X | X | |
U0123 | X | X | X | ||
U0124 | X | X | X | ||
U0126 | X | X | X | ||
U0293 | X | X | X | ||
Power Steering ECU with Motor Assembly | U0129 | X | X | X | |
ECM | - | - | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | X | X | X | |
U0142 | X | X | X | ||
U0155 | X | X | X | ||
U0293 | X | X | X | ||
Combination Meter Assembly | U0100 | X | X | X | |
U0129 | X | X | X | ||
U0131 | X | X | X | ||
U0142 | X | X | X | ||
U0151 | X | X | X | ||
U023A | X | X | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | X | X | X | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | |
Steering Sensor | - | - | - | - | |
Telematics Transceiver | U0140 | X | X | X | |
U0155 | X | X | X | ||
U0163 | X | X | X | ||
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | ▲ | ▲ | X |
U0200 | ▲ | X | X | ||
U0208 | ▲ | X | X | ||
U0230 | ▲ | ▲ | X | ||
U1002 | ▲ | X | X | ||
U1115 | ▲ | X | X | ||
Luggage Closer Motor Assembly | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | ▲ | X | X | |
Outer Mirror Control ECU Assembly RH | U0142 | ▲ | ▲ | X | |
Front Power Seat Switch LH | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | |
Multiplex Tilt and Telescopic ECU | U0142 | ▲ | X | X | |
U0208 | X | X | X | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | X | X | X |
U0126 | X | X | X | ||
U0129 | X | X | X | ||
U0142 | X | X | X | ||
U0293 | X | X | X | ||
Driving Support ECU Assembly | U0125 | X | X | X | |
U0126 | X | X | X | ||
U0129 | X | X | X | ||
U0142 | X | X | X | ||
U0293 | X | X | X | ||
U1100 | X | X | X | ||
Lane Departure Warning Camera | U0101 | X | X | X | |
U0123 | X | X | X | ||
U0129 | X | X | X | ||
U0142 | X | X | X | ||
U0155 | X | X | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | X | X | X | |
U0233 | X | X | X | ||
U023A | X | X | X | ||
U1002 | X | X | X | ||
U1100 | X | X | X | ||
Sub Bus 11 | Seat Belt Control ECU | U0129 | X | X | X |
U0140 | X | X | X | ||
U0151 | X | X | X | ||
U1104 | X | X | X |
▲: DTC is likely to be output.
X: DTC is unlikely to be output.
-: DTC is not output.
- | Trouble Mode (Open in Both CAN Main Bus Lines) | ||||
---|---|---|---|---|---|
Sub Bus 1 | |||||
Output ECU | Output DTC | Main Body ECU (Multiplex Network Body ECU) (Click here) |
CAN J/C LH2 to CAN J/C RH2 | CAN J/C RH2 to CAN No. 2 J/C | |
V Bus | Airbag Sensor Assembly | - | - | - | - |
Air Conditioning Amplifier Assembly | U0101 | - | - | - | |
U0131 | - | - | - | ||
U0142 | - | - | - | ||
U0155 | - | - | - | ||
U0163 | - | - | - | ||
U0293 | - | - | - | ||
Multi-media Module Receiver Assembly | U0073 | - | - | - | |
U0100 | - | - | - | ||
U0126 | - | - | - | ||
U0129 | - | - | - | ||
U0131 | - | - | - | ||
U0140 | - | - | - | ||
U0155 | - | - | - | ||
U0164 | - | - | - | ||
U0198 | - | - | - | ||
U0293 | - | - | - | ||
U1110 | - | - | - | ||
Radio Receiver Assembly | U0073 | - | - | - | |
U0100 | - | - | - | ||
U0129 | - | - | - | ||
U0140 | - | - | - | ||
U0155 | - | - | - | ||
U0164 | - | - | - | ||
U0293 | - | - | - | ||
U1110 | - | - | - | ||
V Bus | Main Body ECU (Multiplex Network Body ECU) | U0100 | - | - | - |
U0101 | - | - | - | ||
U0120 | - | - | - | ||
U0151 | - | - | - | ||
U0155 | - | - | - | ||
U0164 | - | - | - | ||
U0198 | - | - | - | ||
U0293 | - | - | - | ||
U0327 | - | - | - | ||
Clearance Warning ECU Assembly | U0101 | - | - | - | |
U0155 | - | - | - | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | - | - | - | |
U0123 | - | - | - | ||
U0124 | - | - | - | ||
U0126 | - | - | - | ||
U0293 | - | - | - | ||
Power Steering ECU with Motor Assembly | U0129 | - | - | - | |
ECM | - | - | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | - | - | - | |
U0142 | - | - | - | ||
U0155 | - | - | - | ||
U0293 | - | - | - | ||
Combination Meter Assembly | U0100 | - | - | - | |
U0129 | - | - | - | ||
U0131 | - | - | - | ||
U0142 | - | - | - | ||
U0151 | - | - | - | ||
U023A | - | - | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | - | - | - | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | |
Steering Sensor | - | - | - | - | |
Telematics Transceiver | U0140 | - | - | - | |
U0155 | - | - | - | ||
U0163 | - | - | - | ||
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | ○ | ○ | - |
U0200 | ○ | - | - | ||
U0208 | ○ | - | - | ||
U0230 | ○ | ○ | - | ||
U1002 | ○ | - | - | ||
U1115 | ○ | - | - | ||
Luggage Closer Motor Assembly | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | ○ | - | - | |
Outer Mirror Control ECU Assembly RH | U0142 | ○ | ○ | - | |
Front Power Seat Switch LH | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | |
Multiplex Tilt and Telescopic ECU | U0142 | ○ | - | - | |
U0208 | - | - | - | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | - | - | - |
U0126 | - | - | - | ||
U0129 | - | - | - | ||
U0142 | - | - | - | ||
U0293 | - | - | - | ||
Driving Support ECU Assembly | U0125 | - | - | - | |
U0126 | - | - | - | ||
U0129 | - | - | - | ||
U0142 | - | - | - | ||
U0293 | - | - | - | ||
U1100 | - | - | - | ||
Lane Departure Warning Camera | U0101 | - | - | - | |
U0123 | - | - | - | ||
U0129 | - | - | - | ||
U0142 | - | - | - | ||
U0155 | - | - | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | - | - | - | |
U0233 | - | - | - | ||
U023A | - | - | - | ||
U1002 | - | - | - | ||
U1100 | - | - | - | ||
Sub Bus 11 | Seat Belt Control ECU | U0129 | - | - | - |
U0140 | - | - | - | ||
U0151 | - | - | - | ||
U1104 | - | - | - |
○: DTC is output.
-: DTC is not output.
- | Trouble Mode (CAN Bus Line Short Circuit or Short to GND) | ||
---|---|---|---|
Sub Bus 1 | |||
Output ECU | Output DTC | CANH - CANL CANH - Ground Short CANL - Ground Short |
|
V Bus | Airbag Sensor Assembly | - | - |
Air Conditioning Amplifier Assembly | U0101 | - | |
U0131 | - | ||
U0142 | - | ||
U0155 | - | ||
U0163 | - | ||
U0293 | - | ||
Multi-media Module Receiver Assembly | U0073 | - | |
U0100 | - | ||
U0126 | - | ||
U0129 | - | ||
U0131 | - | ||
U0140 | - | ||
U0155 | - | ||
U0164 | - | ||
U0198 | - | ||
U0293 | - | ||
U1110 | - | ||
Radio Receiver Assembly | U0073 | - | |
U0100 | - | ||
U0129 | - | ||
U0140 | - | ||
U0155 | - | ||
U0164 | - | ||
U0293 | - | ||
U1110 | - | ||
V Bus | Main Body ECU (Multiplex Network Body ECU) | U0100 | - |
U0101 | - | ||
U0120 | - | ||
U0151 | - | ||
U0155 | - | ||
U0164 | - | ||
U0198 | - | ||
U0293 | - | ||
U0327 | - | ||
Clearance Warning ECU Assembly | U0101 | - | |
U0155 | - | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | - | |
U0123 | - | ||
U0124 | - | ||
U0126 | - | ||
U0293 | - | ||
Power Steering ECU with Motor Assembly | U0129 | - | |
ECM | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | - | |
U0142 | - | ||
U0155 | - | ||
U0293 | - | ||
Combination Meter Assembly | U0100 | - | |
U0129 | - | ||
U0131 | - | ||
U0142 | - | ||
U0151 | - | ||
U023A | - | ||
Power Management Control ECU (HV CPU) |
- | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | - | |
Power Management Control ECU (Gateway Function) |
- | - | |
Steering Sensor | - | - | |
Telematics Transceiver | U0140 | - | |
U0155 | - | ||
U0163 | - | ||
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | ○ |
U0200 | ○ | ||
U0208 | ○ | ||
U0230 | ○ | ||
U1002 | ○ | ||
U1115 | ○ | ||
Luggage Closer Motor Assembly | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | ○ | |
Outer Mirror Control ECU Assembly RH | U0142 | ○ | |
Front Power Seat Switch LH | - | - | |
Front Power Seat Switch RH | - | - | |
Multiplex Tilt and Telescopic ECU | U0142 | ○ | |
U0208 | ○ | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | - |
U0126 | - | ||
U0129 | - | ||
U0142 | - | ||
U0293 | - | ||
Driving Support ECU Assembly | U0125 | - | |
U0126 | - | ||
U0129 | - | ||
U0142 | - | ||
U0293 | - | ||
U1100 | - | ||
Lane Departure Warning Camera | U0101 | - | |
U0123 | - | ||
U0129 | - | ||
U0142 | - | ||
U0155 | - | ||
Power Management Control ECU (HV CPU) |
- | - | |
Power Management Control ECU (Power Management CPU) |
- | - | |
Power Management Control ECU (Gateway Function) |
U0104 | - | |
U0233 | - | ||
U023A | - | ||
U1002 | - | ||
U1100 | - | ||
Sub Bus 11 | Seat Belt Control ECU | U0129 | - |
U0140 | - | ||
U0151 | - | ||
U1104 | - |
○: DTC is output.
-: DTC is not output.
DTC COMBINATION TABLE (OPEN IN CAN BRANCH OF SUB BUS 11, PAST COMMUNICATION ERROR) (for LHD)
Regarding a past communication error of an ECU and sensor connected to sub bus 11 (in this case, normal is displayed when performing the CAN bus check, but communication DTCs are output), determine the part that had a malfunction based on DTCs output from the power management control ECU.
As gateway function equipped ECUs (sub bus monitor ECUs) monitor signals from all ECUs that are connected to sub buses, gateway function equipped ECUs can detect ECUs with a communication stop more accurately.
DTCs output from ECUs other than the power management control ECU (gateway function equipped ECU) are shown only as a reference.
Regarding a communication stop that is currently occurring in sub bus 11, the malfunctioning part can be confirmed easily by performing the CAN bus check using the GTS.
If an open occurs in just one of the lines of a CAN branch, DTCs which are not related to malfunctioning parts may be output (DTCs may be displayed randomly), or a message indicating a communication error may be displayed.
- | Trouble Mode (Open in One CAN Branch Line) | |||||
---|---|---|---|---|---|---|
Sub Bus 11 | ||||||
Output ECU | Output DTC | Blind Spot Monitor Sensor LH (Click here) |
Driving Support ECU Assembly (Click here) |
Lane Departure Warning Camera (Click here) |
Seat Belt Control ECU (Click here) |
|
V Bus | Airbag Sensor Assembly | - | - | - | - | - |
Air Conditioning Amplifier Assembly | U0101 | X | X | X | X | |
U0131 | X | X | X | X | ||
U0142 | X | X | X | X | ||
U0155 | X | X | X | X | ||
U0163 | X | X | X | X | ||
U0293 | X | X | X | X | ||
V Bus | Multi-media Module Receiver Assembly | U0073 | X | X | X | X |
U0100 | X | X | X | X | ||
U0126 | X | X | X | X | ||
U0129 | X | X | X | X | ||
U0131 | X | X | X | X | ||
U0140 | X | X | X | X | ||
U0155 | X | X | X | X | ||
U0164 | X | X | X | X | ||
U0198 | X | X | X | X | ||
U0293 | X | X | X | X | ||
U1110 | X | X | X | X | ||
Radio Receiver Assembly | U0073 | X | X | X | X | |
U0100 | X | X | X | X | ||
U0129 | X | X | X | X | ||
U0140 | X | X | X | X | ||
U0155 | X | X | X | X | ||
U0164 | X | X | X | X | ||
U0293 | X | X | X | X | ||
U1110 | X | X | X | X | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | X | X | X | X | |
U0101 | X | X | X | X | ||
U0120 | X | X | X | X | ||
U0151 | X | X | X | X | ||
U0155 | X | X | X | X | ||
U0164 | X | X | X | X | ||
U0198 | X | X | X | X | ||
U0293 | X | X | X | X | ||
U0327 | X | X | X | X | ||
Clearance Warning ECU Assembly | U0101 | X | X | X | X | |
U0155 | X | X | X | X | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | X | X | X | X | |
U0123 | X | X | X | X | ||
U0124 | X | X | X | X | ||
U0126 | X | X | X | X | ||
U0293 | X | X | X | X | ||
Power Steering ECU with Motor Assembly | U0129 | X | X | X | X | |
ECM | - | - | - | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | X | X | X | X | |
U0142 | X | X | X | X | ||
U0155 | X | X | X | X | ||
U0293 | X | X | X | X | ||
V Bus | Combination Meter Assembly | U0100 | X | X | X | X |
U0129 | X | X | X | X | ||
U0131 | X | X | X | X | ||
U0142 | X | X | X | X | ||
U0151 | X | X | X | X | ||
U023A | X | ▲ | X | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | X | X | X | X | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | - | |
Steering Sensor | - | - | - | - | - | |
Telematics Transceiver | U0140 | X | X | X | X | |
U0155 | X | X | X | X | ||
U0163 | X | X | X | X | ||
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | X | X | X | X |
U0200 | X | X | X | X | ||
U0208 | X | X | X | X | ||
U0230 | X | X | X | X | ||
U1002 | X | X | X | X | ||
U1115 | X | X | X | X | ||
Luggage Closer Motor Assembly | - | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | X | X | X | X | |
Outer Mirror Control ECU Assembly RH | U0142 | X | X | X | X | |
Front Power Seat Switch LH | - | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | - | |
Multiplex Tilt and Telescopic ECU | U0142 | X | X | X | X | |
U0208 | X | X | X | X | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | ▲ | X | X | X |
U0126 | ▲ | X | X | X | ||
U0129 | ▲ | X | X | X | ||
U0142 | ▲ | X | X | X | ||
U0293 | ▲ | X | X | X | ||
Sub Bus 11 | Driving Support ECU Assembly | U0125 | X | ▲ | X | X |
U0126 | X | ▲ | X | X | ||
U0129 | X | ▲ | X | X | ||
U0142 | X | ▲ | X | X | ||
U0293 | ▲ | X | X | X | ||
U1100 | X | ▲ | X | ▲ | ||
Lane Departure Warning Camera | U0101 | X | X | ▲ | X | |
U0123 | X | X | ▲ | X | ||
U0129 | X | X | ▲ | X | ||
U0142 | X | X | ▲ | X | ||
U0155 | X | X | ▲ | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | X | ▲ | X | X | |
U0233 | ▲ | X | X | X | ||
U023A | X | X | ▲ | X | ||
U1002 | X | X | X | X | ||
U1100 | X | X | X | ▲ | ||
Seat Belt Control ECU | U0129 | X | X | X | ▲ | |
U0140 | X | X | X | ▲ | ||
U0151 | X | X | X | ▲ | ||
U1104 | X | ▲ | X | ▲ |
▲: DTC is likely to be output.
X: DTC is unlikely to be output.
-: DTC is not output.
- | Trouble Mode (Open in Both CAN Branch Lines) | |||||
---|---|---|---|---|---|---|
Sub Bus 11 | ||||||
Output ECU | Output DTC | Blind Spot Monitor Sensor LH (Click here) |
Driving Support ECU Assembly (Click here) |
Lane Departure Warning Camera (Click here) |
Seat Belt Control ECU (Click here) |
|
V Bus | Airbag Sensor Assembly | - | - | - | - | - |
Air Conditioning Amplifier Assembly | U0101 | - | - | - | - | |
U0131 | - | - | - | - | ||
U0142 | - | - | - | - | ||
U0155 | - | - | - | - | ||
U0163 | - | - | - | - | ||
U0293 | - | - | - | - | ||
V Bus | Multi-media Module Receiver Assembly | U0073 | - | - | - | - |
U0100 | - | - | - | - | ||
U0126 | - | - | - | - | ||
U0129 | - | - | - | - | ||
U0131 | - | - | - | - | ||
U0140 | - | - | - | - | ||
U0155 | - | - | - | - | ||
U0164 | - | - | - | - | ||
U0198 | - | - | - | - | ||
U0293 | - | - | - | - | ||
U1110 | - | - | - | - | ||
Radio Receiver Assembly | U0073 | - | - | - | - | |
U0100 | - | - | - | - | ||
U0129 | - | - | - | - | ||
U0140 | - | - | - | - | ||
U0155 | - | - | - | - | ||
U0164 | - | - | - | - | ||
U0293 | - | - | - | - | ||
U1110 | - | - | - | - | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | - | - | - | - | |
U0101 | - | - | - | - | ||
U0120 | - | - | - | - | ||
U0151 | - | - | - | - | ||
U0155 | - | - | - | - | ||
U0164 | - | - | - | - | ||
U0198 | - | - | - | - | ||
U0293 | - | - | - | - | ||
U0327 | - | - | - | - | ||
Clearance Warning ECU Assembly | U0101 | - | - | - | - | |
U0155 | - | - | - | - | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | - | - | - | - | |
U0123 | - | - | - | - | ||
U0124 | - | - | - | - | ||
U0126 | - | - | - | - | ||
U0293 | - | - | - | - | ||
Power Steering ECU with Motor Assembly | U0129 | - | - | - | - | |
ECM | - | - | - | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | - | - | - | - | |
U0142 | - | - | - | - | ||
U0155 | - | - | - | - | ||
U0293 | - | - | - | - | ||
V Bus | Combination Meter Assembly | U0100 | - | - | - | - |
U0129 | - | - | - | - | ||
U0131 | - | - | - | - | ||
U0142 | - | - | - | - | ||
U0151 | - | - | - | - | ||
U023A | - | ○ | - | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | - | - | - | - | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | - | |
Steering Sensor | - | - | - | - | - | |
Telematics Transceiver | U0140 | - | - | - | - | |
U0155 | - | - | - | - | ||
U0163 | - | - | - | - | ||
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | - | - | - | - |
U0200 | - | - | - | - | ||
U0208 | - | - | - | - | ||
U0230 | - | - | - | - | ||
U1002 | - | - | - | - | ||
U1115 | - | - | - | - | ||
Luggage Closer Motor Assembly | - | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | - | - | - | - | |
Outer Mirror Control ECU Assembly RH | U0142 | - | - | - | - | |
Front Power Seat Switch LH | - | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | - | |
Multiplex Tilt and Telescopic ECU | U0142 | - | - | - | - | |
U0208 | - | - | - | - | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | ○ | - | - | - |
U0126 | ○ | - | - | - | ||
U0129 | ○ | - | - | - | ||
U0142 | ○ | - | - | - | ||
U0293 | ○ | - | - | - | ||
Sub Bus 11 | Driving Support ECU Assembly | U0125 | - | ○ | - | - |
U0126 | - | ○ | - | - | ||
U0129 | - | ○ | - | - | ||
U0142 | - | ○ | - | - | ||
U0293 | ○ | - | - | - | ||
U1100 | - | ○ | - | ○ | ||
Lane Departure Warning Camera | U0101 | - | - | ○ | - | |
U0123 | - | - | ○ | - | ||
U0129 | - | - | ○ | - | ||
U0142 | - | - | ○ | - | ||
U0155 | - | - | ○ | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | - | ○ | - | - | |
U0233 | ○ | - | - | - | ||
U023A | - | - | ○ | - | ||
U1002 | - | - | - | - | ||
U1100 | - | - | - | ○ | ||
Seat Belt Control ECU | U0129 | - | - | - | ○ | |
U0140 | - | - | - | ○ | ||
U0151 | - | - | - | ○ | ||
U1104 | - | ○ | - | ○ |
○: DTC is output.
-: DTC is not output.
- | Trouble Mode (Open in One CAN Main Bus Line) | |||||
---|---|---|---|---|---|---|
Sub Bus 11 | ||||||
Output ECU | Output DTC | Power Management Control ECU (Click here) |
CAN J/C RH3 to CAN No. 4 J/C | CAN J/C No. 3 to CAN J/C RH3* | CAN J/C No. 4 to CAN J/C No. 5 | |
V Bus | Airbag Sensor Assembly | - | - | - | - | - |
Air Conditioning Amplifier Assembly | U0101 | X | X | X | X | |
U0131 | X | X | X | X | ||
U0142 | X | X | X | X | ||
U0155 | X | X | X | X | ||
U0163 | X | X | X | X | ||
U0293 | X | X | X | X | ||
V Bus | Multi-media Module Receiver Assembly | U0073 | X | X | X | X |
U0100 | X | X | X | X | ||
U0126 | X | X | X | X | ||
U0129 | X | X | X | X | ||
U0131 | X | X | X | X | ||
U0140 | X | X | X | X | ||
U0155 | X | X | X | X | ||
U0164 | X | X | X | X | ||
U0198 | X | X | X | X | ||
U0293 | X | X | X | X | ||
U1110 | X | X | X | X | ||
Radio Receiver Assembly | U0073 | X | X | X | X | |
U0100 | X | X | X | X | ||
U0129 | X | X | X | X | ||
U0140 | X | X | X | X | ||
U0155 | X | X | X | X | ||
U0164 | X | X | X | X | ||
U0293 | X | X | X | X | ||
U1110 | X | X | X | X | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | X | X | X | X | |
U0101 | X | X | X | X | ||
U0120 | X | X | X | X | ||
U0151 | X | X | X | X | ||
U0155 | X | X | X | X | ||
U0164 | X | X | X | X | ||
U0198 | X | X | X | X | ||
U0293 | X | X | X | X | ||
U0327 | X | X | X | X | ||
Clearance Warning ECU Assembly | U0101 | X | X | X | X | |
U0155 | X | X | X | X | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | X | X | X | X | |
U0123 | X | X | X | X | ||
U0124 | X | X | X | X | ||
U0126 | X | X | X | X | ||
U0293 | X | X | X | X | ||
Power Steering ECU with Motor Assembly | U0129 | X | X | X | X | |
ECM | - | - | - | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | X | X | X | X | |
U0142 | X | X | X | X | ||
U0155 | X | X | X | X | ||
U0293 | X | X | X | X | ||
V Bus | Combination Meter Assembly | U0100 | X | X | X | X |
U0129 | X | X | X | X | ||
U0131 | X | X | X | X | ||
U0142 | X | X | X | X | ||
U0151 | X | X | X | X | ||
U023A | ▲ | X | X | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | X | X | X | X | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | - | |
Steering Sensor | - | - | - | - | - | |
Telematics Transceiver | U0140 | X | X | X | X | |
U0155 | X | X | X | X | ||
U0163 | X | X | X | X | ||
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | X | X | X | X |
U0200 | X | X | X | X | ||
U0208 | X | X | X | X | ||
U0230 | X | X | X | X | ||
U1002 | X | X | X | X | ||
U1115 | X | X | X | X | ||
Luggage Closer Motor Assembly | - | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | X | X | X | X | |
Outer Mirror Control ECU Assembly RH | U0142 | X | X | X | X | |
Front Power Seat Switch LH | - | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | - | |
Multiplex Tilt and Telescopic ECU | U0142 | X | X | X | X | |
U0208 | X | X | X | X | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | ▲ | ▲ | ▲ | X |
U0126 | ▲ | ▲ | ▲ | X | ||
U0129 | ▲ | ▲ | ▲ | X | ||
U0142 | ▲ | ▲ | ▲ | X | ||
U0293 | ▲ | ▲ | ▲ | X | ||
Sub Bus 11 | Driving Support ECU Assembly | U0125 | ▲ | X | X | X |
U0126 | ▲ | X | X | X | ||
U0129 | ▲ | X | X | X | ||
U0142 | ▲ | X | X | X | ||
U0293 | ▲ | ▲ | ▲ | X | ||
U1100 | X | X | X | X | ||
Lane Departure Warning Camera | U0101 | ▲ | X | X | X | |
U0123 | ▲ | X | X | X | ||
U0129 | ▲ | X | X | X | ||
U0142 | ▲ | X | X | X | ||
U0155 | ▲ | X | X | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | ▲ | X | X | X | |
U0233 | ▲ | ▲ | ▲ | X | ||
U023A | ▲ | X | X | X | ||
U1002 | ▲ | X | X | X | ||
U1100 | ▲ | X | X | X | ||
Seat Belt Control ECU | U0129 | ▲ | X | X | X | |
U0140 | ▲ | X | X | X | ||
U0151 | ▲ | X | X | X | ||
U1104 | X | X | X | X |
▲: DTC is likely to be output.
X: DTC is unlikely to be output.
-: DTC is not output.
*: w/ Dynamic radar cruise control system.
- | Trouble Mode (Open in Both CAN Main Bus Lines) | |||||
---|---|---|---|---|---|---|
Sub Bus 11 | ||||||
Output ECU | Output DTC | Power Management Control ECU (Click here) |
CAN J/C RH3 to CAN No. 4 J/C | CAN J/C No. 3 to CAN J/C RH3* | CAN J/C No. 4 to CAN J/C No. 5 | |
V Bus | Airbag Sensor Assembly | - | - | - | - | - |
V Bus | Air Conditioning Amplifier Assembly | U0101 | - | - | - | - |
U0131 | - | - | - | - | ||
U0142 | - | - | - | - | ||
U0155 | - | - | - | - | ||
U0163 | - | - | - | - | ||
U0293 | - | - | - | - | ||
Multi-media Module Receiver Assembly | U0073 | - | - | - | - | |
U0100 | - | - | - | - | ||
U0126 | - | - | - | - | ||
U0129 | - | - | - | - | ||
U0131 | - | - | - | - | ||
U0140 | - | - | - | - | ||
U0155 | - | - | - | - | ||
U0164 | - | - | - | - | ||
U0198 | - | - | - | - | ||
U0293 | - | - | - | - | ||
U1110 | - | - | - | - | ||
Radio Receiver Assembly | U0073 | - | - | - | - | |
U0100 | - | - | - | - | ||
U0129 | - | - | - | - | ||
U0140 | - | - | - | - | ||
U0155 | - | - | - | - | ||
U0164 | - | - | - | - | ||
U0293 | - | - | - | - | ||
U1110 | - | - | - | - | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | - | - | - | - | |
U0101 | - | - | - | - | ||
U0120 | - | - | - | - | ||
U0151 | - | - | - | - | ||
U0155 | - | - | - | - | ||
U0164 | - | - | - | - | ||
U0198 | - | - | - | - | ||
U0293 | - | - | - | - | ||
U0327 | - | - | - | - | ||
Clearance Warning ECU Assembly | U0101 | - | - | - | - | |
U0155 | - | - | - | - | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | - | - | - | - | |
U0123 | - | - | - | - | ||
U0124 | - | - | - | - | ||
U0126 | - | - | - | - | ||
U0293 | - | - | - | - | ||
Power Steering ECU with Motor Assembly | U0129 | - | - | - | - | |
ECM | - | - | - | - | - | |
V Bus | Certification ECU (Smart Key ECU Assembly) | U0100 | - | - | - | - |
U0142 | - | - | - | - | ||
U0155 | - | - | - | - | ||
U0293 | - | - | - | - | ||
Combination Meter Assembly | U0100 | - | - | - | - | |
U0129 | - | - | - | - | ||
U0131 | - | - | - | - | ||
U0142 | - | - | - | - | ||
U0151 | - | - | - | - | ||
U023A | ○ | - | - | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | - | - | - | - | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | - | |
Steering Sensor | - | - | - | - | - | |
Telematics Transceiver | U0140 | - | - | - | - | |
U0155 | - | - | - | - | ||
U0163 | - | - | - | - | ||
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | - | - | - | - |
U0200 | - | - | - | - | ||
U0208 | - | - | - | - | ||
U0230 | - | - | - | - | ||
U1002 | - | - | - | - | ||
U1115 | - | - | - | - | ||
Luggage Closer Motor Assembly | - | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | - | - | - | - | |
Outer Mirror Control ECU Assembly RH | U0142 | - | - | - | - | |
Front Power Seat Switch LH | - | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | - | |
Multiplex Tilt and Telescopic ECU | U0142 | - | - | - | - | |
U0208 | - | - | - | - | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | ○ | ○ | ○ | - |
U0126 | ○ | ○ | ○ | - | ||
U0129 | ○ | ○ | ○ | - | ||
U0142 | ○ | ○ | ○ | - | ||
U0293 | ○ | ○ | ○ | - | ||
Driving Support ECU Assembly | U0125 | ○ | - | - | - | |
U0126 | ○ | - | - | - | ||
U0129 | ○ | - | - | - | ||
U0142 | ○ | - | - | - | ||
U0293 | ○ | ○ | ○ | - | ||
U1100 | - | - | - | - | ||
Lane Departure Warning Camera | U0101 | ○ | - | - | - | |
U0123 | ○ | - | - | - | ||
U0129 | ○ | - | - | - | ||
U0142 | ○ | - | - | - | ||
U0155 | ○ | - | - | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | ○ | - | - | - | |
U0233 | ○ | ○ | ○ | - | ||
U023A | ○ | - | - | - | ||
U1002 | ○ | - | - | - | ||
U1100 | ○ | - | - | - | ||
Seat Belt Control ECU | U0129 | ○ | - | - | - | |
U0140 | ○ | - | - | - | ||
U0151 | ○ | - | - | - | ||
U1104 | - | - | - | - |
○: DTC is output.
-: DTC is not output.
*: w/ Dynamic radar cruise control system.
- | Trouble Mode (CAN Bus Line Short Circuit or Short to GND) | ||
---|---|---|---|
Sub Bus 11 | |||
Output ECU | Output DTC | CANH - CANL CANH - Ground Short CANL - Ground Short |
|
V Bus | Airbag Sensor Assembly | - | - |
V Bus | Air Conditioning Amplifier Assembly | U0101 | - |
U0131 | - | ||
U0142 | - | ||
U0155 | - | ||
U0163 | - | ||
U0293 | - | ||
Multi-media Module Receiver Assembly | U0073 | - | |
U0100 | - | ||
U0126 | - | ||
U0129 | - | ||
U0131 | - | ||
U0140 | - | ||
U0155 | - | ||
U0164 | - | ||
U0198 | - | ||
U0293 | - | ||
U1110 | - | ||
Radio Receiver Assembly | U0073 | - | |
U0100 | - | ||
U0129 | - | ||
U0140 | - | ||
U0155 | - | ||
U0164 | - | ||
U0293 | - | ||
U1110 | - | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | - | |
U0101 | - | ||
U0120 | - | ||
U0151 | - | ||
U0155 | - | ||
U0164 | - | ||
U0198 | - | ||
U0293 | - | ||
U0327 | - | ||
Clearance Warning ECU Assembly | U0101 | - | |
U0155 | - | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | - | |
U0123 | - | ||
U0124 | - | ||
U0126 | - | ||
U0293 | - | ||
Power Steering ECU with Motor Assembly | U0129 | - | |
ECM | - | - | |
V Bus | Certification ECU (Smart Key ECU Assembly) | U0100 | - |
U0142 | - | ||
U0155 | - | ||
U0293 | - | ||
Combination Meter Assembly | U0100 | - | |
U0129 | - | ||
U0131 | - | ||
U0142 | - | ||
U0151 | - | ||
U023A | ○ | ||
Power Management Control ECU (HV CPU) |
- | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | - | |
Power Management Control ECU (Gateway Function) |
- | - | |
Steering Sensor | - | - | |
Telematics Transceiver | U0140 | - | |
U0155 | - | ||
U0163 | - | ||
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | - |
U0200 | - | ||
U0208 | - | ||
U0230 | - | ||
U1002 | - | ||
U1115 | - | ||
Luggage Closer Motor Assembly | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | - | |
Outer Mirror Control ECU Assembly RH | U0142 | - | |
Front Power Seat Switch LH | - | - | |
Front Power Seat Switch RH | - | - | |
Multiplex Tilt and Telescopic ECU | U0142 | - | |
U0208 | - | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | ○ |
U0126 | ○ | ||
U0129 | ○ | ||
U0142 | ○ | ||
U0293 | ○ | ||
Sub Bus 11 | Driving Support ECU Assembly | U0125 | ○ |
U0126 | ○ | ||
U0129 | ○ | ||
U0142 | ○ | ||
U0293 | ○ | ||
U1100 | ○ | ||
Lane Departure Warning Camera | U0101 | ○ | |
U0123 | ○ | ||
U0129 | ○ | ||
U0142 | ○ | ||
U0155 | ○ | ||
Power Management Control ECU (HV CPU) |
- | - | |
Power Management Control ECU (Power Management CPU) |
- | - | |
Power Management Control ECU (Gateway Function) |
U0104 | ○ | |
U0233 | ○ | ||
U023A | ○ | ||
U1002 | ○ | ||
U1100 | ○ | ||
Seat Belt Control ECU | U0129 | ○ | |
U0140 | ○ | ||
U0151 | ○ | ||
U1104 | ○ |
○: DTC is output.
-: DTC is not output.
DTC COMBINATION TABLE (OPEN IN CAN BRANCH OF V BUS, PAST COMMUNICATION ERROR) (for RHD)
Regarding a past communication error of an ECU and sensor connected to the V bus (in this case, normal is displayed when performing the CAN bus check, but communication DTCs are output), the probable CAN branch that had a malfunction can be determined based on the following DTC combination table.
Based on the table below and DTCs output from ECUs connected via CAN communication, the probable part for which communication stop occurred can be determined.
Regarding an open in a CAN branch and a communication stop that is currently occurring, the malfunctioning part can be confirmed easily by performing the CAN bus check using the GTS because the ECU or sensor connected to the CAN branch does not respond (the ECU or sensor name will not be displayed on the screen).
If an open in a CAN main bus line, a short between the CAN bus lines (CANH and CANL) or a +B or ground short in the CAN bus occurs, DTCs of almost all ECUs (or sensors) on the CAN bus may be output, or a message indicating a communication error may be displayed on the GTS screen. In this case, check the resistance of the CAN bus (steps 5 to 7) first (Click here).
If an open occurs in just one of the lines of a CAN branch, DTCs which are not related to malfunctioning parts may be output (DTCs may be displayed randomly), or a message indicating a communication error may be displayed.
- | Trouble Mode (Open in One CAN Branch Line) | |||||
---|---|---|---|---|---|---|
V Bus | ||||||
Output ECU | Output DTC | Center Airbag Sensor Communication Stop Mode (Click here) |
Air Conditioning Amplifier Communication Stop Mode (Click here) |
Multi-media Module Receiver Assembly Communication Stop Mode (Click here) |
Audio Receiver Assembly Communication Stop Mode (Click here) |
|
V Bus | Airbag Sensor Assembly | - | - | - | - | - |
Air Conditioning Amplifier Assembly | U0101 | X | ▲ | X | X | |
U0131 | X | ▲ | X | X | ||
U0142 | X | ▲ | X | X | ||
U0155 | X | ▲ | X | X | ||
U0163 | X | ▲ | ▲ | ▲ | ||
U0293 | X | ▲ | X | X | ||
Multi-media Module Receiver Assembly | U0073 | X | X | ▲ | - | |
U0100 | X | X | ▲ | - | ||
U0126 | X | X | ▲ | - | ||
U0129 | X | X | ▲ | - | ||
U0131 | X | X | ▲ | - | ||
U0140 | X | X | ▲ | - | ||
U0155 | X | X | ▲ | - | ||
U0164 | X | ▲ | ▲ | - | ||
U0293 | X | X | ▲ | - | ||
U1110 | X | X | ▲ | - | ||
V Bus | Radio Receiver Assembly | U0073 | X | X | - | ▲ |
U0100 | X | X | - | ▲ | ||
U0129 | X | X | - | ▲ | ||
U0140 | X | X | - | ▲ | ||
U0155 | X | X | - | ▲ | ||
U0164 | X | ▲ | - | ▲ | ||
U0293 | X | X | - | ▲ | ||
U1110 | X | X | - | ▲ | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | X | X | X | X | |
U0101 | X | X | X | X | ||
U0120 | X | X | X | X | ||
U0151 | ▲ | X | X | X | ||
U0155 | X | X | X | X | ||
U0164 | X | ▲ | X | X | ||
U0293 | X | X | X | X | ||
U0327 | X | X | X | X | ||
Clearance Warning ECU Assembly | U0101 | X | X | X | X | |
U0155 | X | X | X | X | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | ▲ | X | X | X | |
U0123 | ▲ | X | X | X | ||
U0124 | ▲ | X | X | X | ||
U0126 | X | X | X | X | ||
U0293 | X | X | X | X | ||
Power Steering ECU with Motor Assembly | U0129 | X | X | X | X | |
ECM | - | - | - | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | X | X | X | X | |
U0142 | X | X | X | X | ||
U0155 | X | X | X | X | ||
U0293 | X | X | X | X | ||
Combination Meter Assembly | U0100 | X | X | X | X | |
U0129 | X | X | X | X | ||
U0131 | X | X | X | X | ||
U0142 | X | X | X | X | ||
U0151 | ▲ | X | X | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | - | |
V Bus | Power Management Control ECU (Power Management CPU) |
U0293 | X | X | X | X |
Power Management Control ECU (Gateway Function) |
- | - | - | - | - | |
Steering Sensor | - | - | - | - | - | |
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | X | X | X | X |
U0200 | X | X | X | X | ||
U0208 | X | X | X | X | ||
U0230 | X | X | X | X | ||
U0265 | X | X | - | X | ||
U1002 | X | X | X | X | ||
U1115 | X | X | X | X | ||
Luggage Closer Motor Assembly | - | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | X | X | X | X | |
Outer Mirror Control ECU Assembly RH | U0142 | X | X | X | X | |
Front Power Seat Switch LH | - | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | - | |
Rear Television Camera Assembly | U0100 | X | X | - | X | |
U0126 | ▲ | X | - | X | ||
U0129 | X | X | - | X | ||
U0140 | X | X | - | X | ||
U0163 | X | X | - | ▲ | ||
U1110 | X | X | - | X | ||
Multiplex Tilt and Telescopic ECU | U0142 | X | X | X | X | |
U0208 | X | X | X | X | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | X | X | X | X |
U0126 | X | X | X | X | ||
U0129 | X | X | X | X | ||
U0142 | X | X | X | X | ||
U0293 | X | X | X | X | ||
Sub Bus 11 | Driving Support ECU Assembly | U0125 | ▲ | X | X | X |
U0126 | X | X | X | X | ||
U0129 | X | X | X | X | ||
U0142 | X | X | X | X | ||
U0293 | X | X | X | X | ||
U1100 | X | X | X | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | X | X | X | X | |
U0233 | X | X | X | X | ||
U1002 | X | X | X | X | ||
U1100 | X | X | X | X | ||
Seat Belt Control ECU | U0129 | X | X | X | X | |
U0140 | X | X | X | X | ||
U0151 | ▲ | X | X | X | ||
U1104 | X | X | X | X |
▲: DTC is likely to be output.
X: DTC is unlikely to be output.
-: DTC is not output.
- | Trouble Mode (Open in One CAN Branch Line) | |||||
---|---|---|---|---|---|---|
V Bus | ||||||
Output ECU | Output DTC | Main Body ECU Communication Stop Mode (Click here) |
Clearance Warning ECU Communication Stop Mode (Click here) |
Skid Control ECU Communication Stop Mode (Click here) |
Power Steering ECU Communication Stop Mode (Click here) |
|
V Bus | Airbag Sensor Assembly | - | - | - | - | - |
Air Conditioning Amplifier Assembly | U0101 | X | X | X | X | |
U0131 | X | X | X | ▲ | ||
U0142 | ▲ | X | X | X | ||
U0155 | X | X | X | X | ||
U0163 | X | X | X | X | ||
U0293 | X | X | X | X | ||
V Bus | Multi-media Module Receiver Assembly | U0073 | X | X | X | X |
U0100 | X | X | X | X | ||
U0126 | X | X | X | X | ||
U0129 | X | X | ▲ | X | ||
U0131 | X | X | X | ▲ | ||
U0140 | ▲ | X | X | X | ||
U0155 | X | X | X | X | ||
U0164 | X | X | X | X | ||
U0293 | X | X | X | X | ||
U1110 | X | ▲ | X | X | ||
Radio Receiver Assembly | U0073 | X | X | X | X | |
U0100 | X | X | X | X | ||
U0129 | X | X | ▲ | X | ||
U0140 | ▲ | X | X | X | ||
U0155 | X | X | X | X | ||
U0164 | X | X | X | X | ||
U0293 | X | X | X | X | ||
U1110 | X | ▲ | X | X | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | ▲ | X | X | X | |
U0101 | ▲ | X | X | X | ||
U0120 | ▲ | X | X | X | ||
U0151 | ▲ | X | X | X | ||
U0155 | ▲ | X | X | X | ||
U0164 | ▲ | X | X | X | ||
U0293 | ▲ | X | X | X | ||
U0327 | ▲ | X | X | X | ||
Clearance Warning ECU Assembly | U0101 | X | ▲ | X | X | |
U0155 | X | ▲ | X | X | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | X | X | ▲ | X | |
U0123 | X | X | ▲ | X | ||
U0124 | X | X | ▲ | X | ||
U0126 | X | X | ▲ | X | ||
U0293 | X | X | ▲ | X | ||
Power Steering ECU with Motor Assembly | U0129 | X | X | ▲ | ▲ | |
ECM | - | - | - | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | X | X | X | X | |
U0142 | ▲ | X | X | X | ||
U0155 | X | X | X | X | ||
U0293 | X | X | X | X | ||
V Bus | Combination Meter Assembly | U0100 | X | X | X | X |
U0129 | X | X | ▲ | X | ||
U0131 | X | X | X | ▲ | ||
U0142 | ▲ | X | X | X | ||
U0151 | X | X | X | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | X | X | X | X | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | - | |
Steering Sensor | - | - | - | - | - | |
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | X | X | X | X |
U0200 | X | X | X | X | ||
U0208 | X | X | X | X | ||
U0230 | X | X | X | X | ||
U0265 | X | X | X | X | ||
U1002 | X | X | X | X | ||
U1115 | X | X | X | X | ||
Luggage Closer Motor Assembly | - | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | X | X | X | X | |
Outer Mirror Control ECU Assembly RH | U0142 | X | X | X | X | |
Front Power Seat Switch LH | - | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | - | |
Rear Television Camera Assembly | U0100 | ▲ | X | X | X | |
U0126 | ▲ | X | X | X | ||
U0129 | ▲ | X | ▲ | X | ||
U0140 | X | X | X | X | ||
U0163 | ▲ | X | X | X | ||
U1110 | ▲ | ▲ | X | X | ||
Multiplex Tilt and Telescopic ECU | U0142 | X | X | X | X | |
U0208 | X | X | X | X | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | X | X | X | X |
U0126 | X | X | X | X | ||
U0129 | X | X | ▲ | X | ||
U0142 | ▲ | X | X | X | ||
U0293 | X | X | X | X | ||
Driving Support ECU Assembly | U0125 | X | X | X | X | |
U0126 | X | X | X | X | ||
U0129 | X | X | ▲ | X | ||
U0142 | ▲ | X | X | X | ||
U0293 | X | X | X | X | ||
U1100 | X | X | X | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | X | X | X | X | |
U0233 | X | X | X | X | ||
U1002 | X | X | X | X | ||
U1100 | X | X | X | X | ||
Seat Belt Control ECU | U0129 | X | X | ▲ | X | |
U0140 | ▲ | X | X | X | ||
U0151 | X | X | X | X | ||
U1104 | X | X | X | X |
▲: DTC is likely to be output.
X: DTC is unlikely to be output.
-: DTC is not output.
- | Trouble Mode (Open in One CAN Branch Line) | |||||
---|---|---|---|---|---|---|
V Bus | ||||||
Output ECU | Output DTC | Certification ECU Communication Stop Mode (Click here) |
Power Management Control ECU Communication Stop Mode (Click here) |
Steering Angle Sensor Communication Stop Mode (Click here) |
DLC3 | |
V Bus | Airbag Sensor Assembly | - | - | - | - | - |
V Bus | Air Conditioning Amplifier Assembly | U0101 | X | ▲ | X | X |
U0131 | X | X | X | X | ||
U0142 | X | X | X | X | ||
U0155 | X | X | X | X | ||
U0163 | X | X | X | X | ||
U0293 | X | X | X | X | ||
Multi-media Module Receiver Assembly | U0073 | X | X | X | X | |
U0100 | X | ▲ | X | X | ||
U0126 | X | X | ▲ | X | ||
U0129 | X | X | X | X | ||
U0131 | X | X | X | X | ||
U0140 | X | X | X | X | ||
U0155 | X | X | X | X | ||
U0164 | X | X | X | X | ||
U0293 | X | ▲ | X | X | ||
U1110 | X | X | X | X | ||
Radio Receiver Assembly | U0073 | X | X | X | X | |
U0100 | X | ▲ | X | X | ||
U0129 | X | X | X | X | ||
U0140 | X | X | X | X | ||
U0155 | X | X | X | X | ||
U0164 | X | X | X | X | ||
U0293 | X | ▲ | X | X | ||
U1110 | X | X | X | X | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | X | ▲ | X | X | |
U0101 | X | ▲ | X | X | ||
U0120 | X | ▲ | X | X | ||
U0151 | X | X | X | X | ||
U0155 | X | X | X | X | ||
U0164 | X | X | X | X | ||
U0293 | X | ▲ | X | X | ||
U0327 | ▲ | X | X | X | ||
Clearance Warning ECU Assembly | U0101 | X | ▲ | X | X | |
U0155 | X | X | X | X | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | X | X | ▲ | X | |
U0123 | X | X | X | X | ||
U0124 | X | X | X | X | ||
U0126 | X | X | ▲ | X | ||
U0293 | X | ▲ | X | X | ||
V Bus | Power Steering ECU with Motor Assembly | U0129 | X | X | X | X |
ECM | - | - | - | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | ▲ | ▲ | X | X | |
U0142 | ▲ | X | X | X | ||
U0155 | ▲ | X | X | X | ||
U0293 | ▲ | ▲ | X | X | ||
Combination Meter Assembly | U0100 | X | X | X | X | |
U0129 | X | X | X | X | ||
U0131 | X | X | X | X | ||
U0142 | X | X | X | X | ||
U0151 | X | X | X | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | X | ▲ | X | X | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | - | |
Steering Sensor | - | - | - | - | - | |
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | X | X | X | X |
U0200 | X | X | X | X | ||
U0208 | X | X | X | X | ||
U0230 | X | X | X | X | ||
U0265 | X | X | X | X | ||
U1002 | X | X | X | X | ||
U1115 | X | X | X | X | ||
Luggage Closer Motor Assembly | - | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | X | X | X | X | |
Outer Mirror Control ECU Assembly RH | U0142 | X | X | X | X | |
Front Power Seat Switch LH | - | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | - | |
Rear Television Camera Assembly | U0100 | X | X | X | X | |
U0126 | X | X | X | X | ||
U0129 | X | X | X | X | ||
U0140 | X | X | X | X | ||
U0163 | X | X | X | X | ||
U1110 | X | X | X | X | ||
Sub Bus 1 | Multiplex Tilt and Telescopic ECU | U0142 | X | X | X | X |
U0208 | X | X | X | X | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | X | ▲ | X | X |
U0126 | X | ▲ | ▲ | X | ||
U0129 | X | ▲ | X | X | ||
U0142 | X | ▲ | X | X | ||
U0293 | X | ▲ | X | X | ||
Driving Support ECU Assembly | U0125 | X | ▲ | X | X | |
U0126 | X | ▲ | ▲ | X | ||
U0129 | X | ▲ | X | X | ||
U0142 | X | ▲ | X | X | ||
U0293 | X | ▲ | X | X | ||
U1100 | X | X | X | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | X | X | X | X | |
U0233 | X | X | X | X | ||
U1002 | X | X | X | X | ||
U1100 | X | X | X | X | ||
Seat Belt Control ECU | U0129 | X | ▲ | X | X | |
U0140 | X | ▲ | X | X | ||
U0151 | X | ▲ | X | X | ||
U1104 | X | X | X | X |
▲: DTC is likely to be output.
X: DTC is unlikely to be output.
-: DTC is not output.
- | Trouble Mode (Open in Both CAN Branch Lines) | |||||
---|---|---|---|---|---|---|
V Bus | ||||||
Output ECU | Output DTC | Center Airbag Sensor Communication Stop Mode (Click here) |
Air Conditioning Amplifier Communication Stop Mode (Click here) |
Multi-media Module Receiver Assembly Communication Stop Mode (Click here) |
Audio Receiver Assembly Communication Stop Mode (Click here) |
|
V Bus | Airbag Sensor Assembly | - | - | - | - | - |
V Bus | Air Conditioning Amplifier Assembly | U0101 | - | ○ | - | - |
U0131 | - | ○ | - | - | ||
U0142 | - | ○ | - | - | ||
U0155 | - | ○ | - | - | ||
U0163 | - | ○ | ○ | ○ | ||
U0293 | - | ○ | - | - | ||
Multi-media Module Receiver Assembly | U0073 | - | - | ○ | - | |
U0100 | - | - | ○ | - | ||
U0126 | - | - | ○ | - | ||
U0129 | - | - | ○ | - | ||
U0131 | - | - | ○ | - | ||
U0140 | - | - | ○ | - | ||
U0155 | - | - | ○ | - | ||
U0164 | - | - | ○ | - | ||
U0293 | - | - | ○ | - | ||
U1110 | - | - | ○ | - | ||
Radio Receiver Assembly | U0073 | - | - | - | ○ | |
U0100 | - | - | - | ○ | ||
U0129 | - | - | - | ○ | ||
U0140 | - | - | - | ○ | ||
U0155 | - | - | - | ○ | ||
U0164 | - | ○ | - | ○ | ||
U0293 | - | - | - | ○ | ||
U1110 | - | - | - | ○ | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | - | - | - | - | |
U0101 | - | - | - | - | ||
U0120 | - | - | - | - | ||
U0151 | ○ | - | - | - | ||
U0155 | - | - | - | - | ||
U0164 | - | ○ | - | - | ||
U0293 | - | - | - | - | ||
U0327 | - | - | - | - | ||
Clearance Warning ECU Assembly | U0101 | - | - | - | - | |
U0155 | - | - | - | - | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | ○ | - | - | - | |
U0123 | ○ | - | - | - | ||
U0124 | ○ | - | - | - | ||
U0126 | - | - | - | - | ||
U0293 | - | - | - | - | ||
Power Steering ECU with Motor Assembly | U0129 | - | - | - | - | |
V Bus | ECM | - | - | - | - | - |
Certification ECU (Smart Key ECU Assembly) | U0100 | - | - | - | - | |
U0142 | - | - | - | - | ||
U0155 | - | - | - | - | ||
U0293 | - | - | - | - | ||
Combination Meter Assembly | U0100 | - | - | - | - | |
U0129 | - | - | - | - | ||
U0131 | - | - | - | - | ||
U0142 | - | - | - | - | ||
U0151 | ○ | - | - | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | - | - | - | - | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | - | |
Steering Sensor | - | - | - | - | - | |
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | - | - | - | - |
U0200 | - | - | - | - | ||
U0208 | - | - | - | - | ||
U0230 | - | - | - | - | ||
U0265 | - | - | - | - | ||
U1002 | - | - | - | - | ||
U1115 | - | - | - | - | ||
Luggage Closer Motor Assembly | - | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | - | - | - | - | |
Outer Mirror Control ECU Assembly RH | U0142 | - | - | - | - | |
Front Power Seat Switch LH | - | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | - | |
Sub Bus 1 | Rear Television Camera Assembly | U0100 | - | - | - | - |
U0126 | ○ | - | - | - | ||
U0129 | - | - | - | - | ||
U0140 | - | - | - | - | ||
U0163 | - | - | - | ○ | ||
U1110 | - | - | - | - | ||
Multiplex Tilt and Telescopic ECU | U0142 | - | - | - | - | |
U0208 | - | - | - | - | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | - | - | - | - |
U0126 | - | - | - | - | ||
U0129 | - | - | - | - | ||
U0142 | - | - | - | - | ||
U0293 | - | - | - | - | ||
Driving Support ECU Assembly | U0125 | ○ | - | - | - | |
U0126 | - | - | - | - | ||
U0129 | - | - | - | - | ||
U0142 | - | - | - | - | ||
U0293 | - | - | - | - | ||
U1100 | - | - | - | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | - | - | - | - | |
U0233 | - | - | - | - | ||
U1002 | - | - | - | - | ||
U1100 | - | - | - | - | ||
Seat Belt Control ECU | U0129 | - | - | - | - | |
U0140 | - | - | - | - | ||
U0151 | ○ | - | - | - | ||
U1104 | - | - | - | - |
○: DTC is output.
-: DTC is not output.
- | Trouble Mode (Open in Both CAN Branch Lines) | |||||
---|---|---|---|---|---|---|
V Bus | ||||||
Output ECU | Output DTC | Main Body ECU Communication Stop Mode (Click here) |
Clearance Warning ECU Communication Stop Mode (Click here) |
Skid Control ECU Communication Stop Mode (Click here) |
Power Steering ECU Communication Stop Mode (Click here) |
|
V Bus | Airbag Sensor Assembly | - | - | - | - | - |
Air Conditioning Amplifier Assembly | U0101 | - | - | - | - | |
U0131 | - | - | - | ○ | ||
U0142 | ○ | - | - | - | ||
U0155 | - | - | - | - | ||
U0163 | - | - | - | - | ||
U0293 | - | - | - | - | ||
Multi-media Module Receiver Assembly | U0073 | - | - | - | - | |
U0100 | - | - | - | - | ||
U0126 | - | - | - | - | ||
U0129 | - | - | ○ | - | ||
U0131 | - | - | - | ○ | ||
U0140 | ○ | - | - | - | ||
U0155 | - | - | - | - | ||
U0164 | - | - | - | - | ||
U0293 | - | - | - | - | ||
U1110 | - | ○ | - | - | ||
Radio Receiver Assembly | U0073 | - | - | - | - | |
U0100 | - | - | - | - | ||
U0129 | - | - | ○ | - | ||
U0140 | ○ | - | - | - | ||
U0155 | - | - | - | - | ||
U0164 | - | - | - | - | ||
U0293 | - | - | - | - | ||
U1110 | - | ○ | - | - | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | ○ | - | - | - | |
U0101 | ○ | - | - | - | ||
U0120 | ○ | - | - | - | ||
U0151 | ○ | - | - | - | ||
U0155 | ○ | - | - | - | ||
U0164 | ○ | - | - | - | ||
U0293 | ○ | - | - | - | ||
U0327 | ○ | - | - | - | ||
Clearance Warning ECU Assembly | U0101 | - | ○ | - | - | |
U0155 | - | ○ | - | - | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | - | - | ○ | - | |
U0123 | - | - | ○ | - | ||
U0124 | - | - | ○ | - | ||
U0126 | - | - | ○ | - | ||
U0293 | - | - | ○ | - | ||
V Bus | Power Steering ECU with Motor Assembly | U0129 | - | - | ○ | ○ |
ECM | - | - | - | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | - | - | - | - | |
U0142 | ○ | - | - | - | ||
U0155 | - | - | - | - | ||
U0293 | - | - | - | - | ||
Combination Meter Assembly | U0100 | - | - | - | - | |
U0129 | - | - | ○ | - | ||
U0131 | - | - | - | ○ | ||
U0142 | ○ | - | - | - | ||
U0151 | - | - | - | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | - | - | - | - | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | - | |
Steering Sensor | - | - | - | - | - | |
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | - | - | - | - |
U0200 | - | - | - | - | ||
U0208 | - | - | - | - | ||
U0230 | - | - | - | - | ||
U0265 | - | - | - | - | ||
U1002 | - | - | - | - | ||
U1115 | - | - | - | - | ||
Luggage Closer Motor Assembly | - | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | - | - | - | - | |
Outer Mirror Control ECU Assembly RH | U0142 | - | - | - | - | |
Front Power Seat Switch LH | - | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | - | |
Sub Bus 1 | Rear Television Camera Assembly | U0100 | - | - | - | - |
U0126 | - | - | - | - | ||
U0129 | - | - | ○ | - | ||
U0140 | - | - | - | - | ||
U0163 | - | - | - | - | ||
U1110 | - | ○ | - | - | ||
Multiplex Tilt and Telescopic ECU | U0142 | - | - | - | - | |
U0208 | - | - | - | - | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | - | - | - | - |
U0126 | - | - | - | - | ||
U0129 | - | - | ○ | - | ||
U0142 | ○ | - | - | - | ||
U0293 | - | - | - | - | ||
Driving Support ECU Assembly | U0125 | - | - | - | - | |
U0126 | - | - | - | - | ||
U0129 | - | - | ○ | - | ||
U0142 | ○ | - | - | - | ||
U0293 | - | - | - | - | ||
U1100 | - | - | - | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | - | - | - | - | |
U0233 | - | - | - | - | ||
U1002 | - | - | - | - | ||
U1100 | - | - | - | - | ||
Seat Belt Control ECU | U0129 | - | - | ○ | - | |
U0140 | ○ | - | - | - | ||
U0151 | - | - | - | - | ||
U1104 | - | - | - | - |
○: DTC is output.
-: DTC is not output.
- | Trouble Mode (Open in Both CAN Branch Lines) | |||||
---|---|---|---|---|---|---|
V Bus | ||||||
Output ECU | Output DTC | Certification ECU Communication Stop Mode (Click here) |
Power Management Control ECU Communication Stop Mode (Click here) |
Steering Angle Sensor Communication Stop Mode (Click here) |
DLC3 | |
V Bus | Airbag Sensor Assembly | - | - | - | - | - |
Air Conditioning Amplifier Assembly | U0101 | - | ○ | - | - | |
U0131 | - | - | - | - | ||
U0142 | - | - | - | - | ||
U0155 | - | - | - | - | ||
U0163 | - | - | - | - | ||
U0293 | - | - | - | - | ||
Multi-media Module Receiver Assembly | U0073 | - | - | - | - | |
U0100 | - | ○ | - | - | ||
U0126 | - | - | ○ | - | ||
U0129 | - | - | - | - | ||
U0131 | - | - | - | - | ||
U0140 | - | - | - | - | ||
U0155 | - | - | - | - | ||
U0164 | - | - | - | - | ||
U0293 | - | ○ | - | - | ||
U1110 | - | - | - | - | ||
Radio Receiver Assembly | U0073 | - | - | - | - | |
U0100 | - | ○ | - | - | ||
U0129 | - | - | - | - | ||
U0140 | - | - | - | - | ||
U0155 | - | - | - | - | ||
U0164 | - | - | - | - | ||
U0293 | - | ○ | - | - | ||
U1110 | - | - | - | - | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | - | ○ | - | - | |
U0101 | - | ○ | - | - | ||
U0120 | - | ○ | - | - | ||
U0151 | - | - | - | - | ||
U0155 | - | - | - | - | ||
U0164 | - | - | - | - | ||
U0293 | - | ○ | - | - | ||
U0327 | ○ | - | - | - | ||
Clearance Warning ECU Assembly | U0101 | - | ○ | - | - | |
U0155 | - | - | - | - | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | - | - | ○ | - | |
U0123 | - | - | - | - | ||
U0124 | - | - | - | - | ||
U0126 | - | - | ○ | - | ||
U0293 | - | ○ | - | - | ||
V Bus | Power Steering ECU with Motor Assembly | U0129 | - | - | - | - |
ECM | - | - | - | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | ○ | ○ | - | - | |
U0142 | ○ | - | - | - | ||
U0155 | ○ | - | - | - | ||
U0293 | ○ | ○ | - | - | ||
Combination Meter Assembly | U0100 | - | - | - | - | |
U0129 | - | - | - | - | ||
U0131 | - | - | - | - | ||
U0142 | - | - | - | - | ||
U0151 | - | - | - | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | - | ○ | - | - | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | - | |
Steering Sensor | - | - | - | - | - | |
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | - | - | - | - |
U0200 | - | - | - | - | ||
U0208 | - | - | - | - | ||
U0230 | - | - | - | - | ||
U0265 | - | - | - | - | ||
U1002 | - | - | - | - | ||
U1115 | - | - | - | - | ||
Luggage Closer Motor Assembly | - | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | - | - | - | - | |
Outer Mirror Control ECU Assembly RH | U0142 | - | - | - | - | |
Front Power Seat Switch LH | - | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | - | |
Sub Bus 1 | Rear Television Camera Assembly | U0100 | - | - | - | - |
U0126 | - | - | - | - | ||
U0129 | - | - | - | - | ||
U0140 | - | - | - | - | ||
U0163 | - | - | - | - | ||
U1110 | - | - | - | - | ||
Multiplex Tilt and Telescopic ECU | U0142 | - | - | - | - | |
U0208 | - | - | - | - | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | - | ○ | - | - |
U0126 | - | ○ | ○ | - | ||
U0129 | - | ○ | - | - | ||
U0142 | - | ○ | - | - | ||
U0293 | - | ○ | - | - | ||
Driving Support ECU Assembly | U0125 | - | ○ | - | - | |
U0126 | - | ○ | ○ | - | ||
U0129 | - | ○ | - | - | ||
U0142 | - | ○ | - | - | ||
U0293 | - | ○ | - | - | ||
U1100 | - | - | - | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | - | - | - | - | |
U0233 | - | - | - | - | ||
U1002 | - | - | - | - | ||
U1100 | - | - | - | - | ||
Seat Belt Control ECU | U0129 | - | ○ | - | - | |
U0140 | - | ○ | - | - | ||
U0151 | - | ○ | - | - | ||
U1104 | - | - | - | - |
○: DTC is output.
-: DTC is not output.
- | Trouble Mode (Open in One CAN Main Bus Line) | ||||
---|---|---|---|---|---|
V Bus | |||||
Output ECU | Output DTC | Combination Meter ECU Communication Stop Mode (Click here) |
CAN J/C LH1 to CAN J/C RH1 | ECM Communication Stop Mode (Click here) |
|
V Bus | Airbag Sensor Assembly | - | - | - | - |
Air Conditioning Amplifier Assembly | U0101 | X | X | X | |
U0131 | X | X | X | ||
U0142 | X | X | X | ||
U0155 | ▲ | ▲ | X | ||
U0163 | X | X | X | ||
U0293 | X | X | ▲ | ||
Multi-media Module Receiver Assembly | U0073 | X | X | X | |
U0100 | X | X | ▲ | ||
U0126 | X | ▲ | X | ||
U0129 | X | ▲ | X | ||
U0131 | X | X | X | ||
U0140 | X | X | X | ||
U0155 | ▲ | ▲ | X | ||
U0164 | X | ▲ | X | ||
U0293 | X | X | X | ||
U1110 | X | ▲ | X | ||
Radio Receiver Assembly | U0073 | X | X | X | |
U0100 | X | X | X | ||
U0129 | X | ▲ | X | ||
U0140 | X | X | X | ||
U0155 | ▲ | ▲ | X | ||
U0164 | X | ▲ | X | ||
U0293 | X | X | X | ||
U1110 | X | ▲ | X | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | X | X | ▲ | |
U0101 | X | X | X | ||
U0120 | X | X | X | ||
U0151 | X | X | X | ||
U0155 | ▲ | ▲ | X | ||
U0164 | X | X | X | ||
U0293 | X | X | X | ||
U0327 | X | ▲ | X | ||
Clearance Warning ECU Assembly | U0101 | X | ▲ | X | |
U0155 | ▲ | X | X | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | X | X | X | |
U0123 | X | X | X | ||
U0124 | X | X | X | ||
U0126 | X | X | X | ||
U0293 | X | ▲ | X | ||
V Bus | Power Steering ECU with Motor Assembly | U0129 | X | ▲ | X |
ECM | - | - | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | X | ▲ | X | |
U0142 | X | ▲ | X | ||
U0155 | ▲ | X | X | ||
U0293 | X | ▲ | X | ||
Combination Meter Assembly | U0100 | ▲ | ▲ | ▲ | |
U0129 | ▲ | X | X | ||
U0131 | ▲ | ▲ | X | ||
U0142 | ▲ | ▲ | X | ||
U0151 | ▲ | ▲ | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | X | X | X | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | |
Steering Sensor | - | - | - | - | |
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | X | X | X |
U0200 | X | X | X | ||
U0208 | X | X | X | ||
U0230 | X | X | X | ||
U0265 | X | X | X | ||
U1002 | X | X | X | ||
U1115 | X | X | X | ||
Luggage Closer Motor Assembly | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | X | X | X | |
Outer Mirror Control ECU Assembly RH | U0142 | X | X | X | |
Front Power Seat Switch LH | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | |
Sub Bus 1 | Rear Television Camera Assembly | U0100 | X | X | ○ |
U0126 | X | X | X | ||
U0129 | X | X | X | ||
U0140 | X | X | X | ||
U0163 | X | X | X | ||
U1110 | X | X | X | ||
Multiplex Tilt and Telescopic ECU | U0142 | X | X | X | |
U0208 | X | X | X | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | X | X | X |
U0126 | X | ▲ | X | ||
U0129 | X | ▲ | X | ||
U0142 | X | X | X | ||
U0293 | X | X | X | ||
Driving Support ECU Assembly | U0125 | X | ▲ | X | |
U0126 | X | ▲ | X | ||
U0129 | X | ▲ | X | ||
U0142 | X | X | X | ||
U0293 | X | X | X | ||
U1100 | X | X | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | X | X | X | |
U0233 | X | X | X | ||
U1002 | X | X | X | ||
U1100 | X | X | X | ||
Seat Belt Control ECU | U0129 | X | ▲ | X | |
U0140 | X | X | X | ||
U0151 | X | X | X | ||
U1104 | X | X | X |
▲: DTC is likely to be output.
X: DTC is unlikely to be output.
-: DTC is not output.
- | Trouble Mode (Open in Both CAN Main Bus Lines) | ||||
---|---|---|---|---|---|
V Bus | |||||
Output ECU | Output DTC | Combination Meter ECU Communication Stop Mode (Click here) |
CAN J/C LH1 to CAN J/C RH1 | ECM Communication Stop Mode (Click here) |
|
V Bus | Airbag Sensor Assembly | - | - | - | - |
Air Conditioning Amplifier Assembly | U0101 | - | - | - | |
U0131 | - | - | - | ||
U0142 | - | - | - | ||
U0155 | ○ | ○ | - | ||
U0163 | - | - | - | ||
U0293 | - | - | ○ | ||
Multi-media Module Receiver Assembly | U0073 | - | - | - | |
U0100 | - | - | ○ | ||
U0126 | - | ○ | - | ||
U0129 | - | ○ | - | ||
U0131 | - | - | - | ||
U0140 | - | - | - | ||
U0155 | ○ | ○ | - | ||
U0164 | - | ○ | - | ||
U0293 | - | - | - | ||
U1110 | - | ○ | - | ||
Radio Receiver Assembly | U0073 | - | - | - | |
U0100 | - | - | - | ||
U0129 | - | ○ | - | ||
U0140 | - | - | - | ||
U0155 | ○ | ○ | - | ||
U0164 | - | ○ | - | ||
U0293 | - | - | - | ||
U1110 | - | ○ | - | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | - | ○ | ○ | |
U0101 | - | - | - | ||
U0120 | - | - | - | ||
U0151 | - | - | - | ||
U0155 | ○ | ○ | - | ||
U0164 | - | - | - | ||
U0293 | - | - | - | ||
U0327 | - | ○ | - | ||
Clearance Warning ECU Assembly | U0101 | - | ○ | - | |
U0155 | ○ | - | - | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | - | - | - | |
U0123 | - | - | - | ||
U0124 | - | - | - | ||
U0126 | - | - | - | ||
U0293 | - | ○ | - | ||
V Bus | Power Steering ECU with Motor Assembly | U0129 | - | ○ | - |
ECM | - | - | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | - | ○ | - | |
U0142 | - | ○ | - | ||
U0155 | ○ | - | - | ||
U0293 | - | ○ | - | ||
Combination Meter Assembly | U0100 | ○ | ○ | ○ | |
U0129 | ○ | - | - | ||
U0131 | ○ | ○ | - | ||
U0142 | ○ | ○ | - | ||
U0151 | ○ | ○ | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | - | - | - | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | |
Steering Sensor | - | - | - | - | |
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | - | - | - |
U0200 | - | - | - | ||
U0208 | - | - | - | ||
U0230 | - | - | - | ||
U0265 | - | - | - | ||
U1002 | - | - | - | ||
U1115 | - | - | - | ||
Luggage Closer Motor Assembly | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | - | - | - | |
Outer Mirror Control ECU Assembly RH | U0142 | - | - | - | |
Front Power Seat Switch LH | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | |
Rear Television Camera Assembly | U0100 | - | - | ○ | |
U0126 | - | - | - | ||
U0129 | - | - | - | ||
U0140 | - | - | - | ||
U0163 | - | - | - | ||
U1110 | - | - | - | ||
Multiplex Tilt and Telescopic ECU | U0142 | - | - | - | |
U0208 | - | - | - | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | - | - | - |
U0126 | - | ○ | - | ||
U0129 | - | ○ | - | ||
U0142 | - | - | - | ||
U0293 | - | - | - | ||
Driving Support ECU Assembly | U0125 | - | ○ | - | |
U0126 | - | ○ | - | ||
U0129 | - | ○ | - | ||
U0142 | - | - | - | ||
U0293 | - | - | - | ||
U1100 | - | - | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | - | - | - | |
U0233 | - | - | - | ||
U1002 | - | - | - | ||
U1100 | - | - | - | ||
Seat Belt Control ECU | U0129 | - | ○ | - | |
U0140 | - | - | - | ||
U0151 | - | - | - | ||
U1104 | - | - | - |
○: DTC is output.
-: DTC is not output.
- | Trouble Mode (CAN Bus Line Short Circuit or Short to GND) | ||
---|---|---|---|
V Bus | |||
Output ECU | Output DTC | CANH - CANL CANH - Ground Short CANL - Ground Short |
|
V Bus | Airbag Sensor Assembly | - | - |
Air Conditioning Amplifier Assembly | U0101 | ○ | |
U0131 | ○ | ||
U0142 | ○ | ||
U0155 | ○ | ||
U0163 | ○ | ||
U0293 | ○ | ||
V Bus | Multi-media Module Receiver Assembly | U0073 | ○ |
U0100 | ○ | ||
U0126 | ○ | ||
U0129 | ○ | ||
U0131 | ○ | ||
U0140 | ○ | ||
U0155 | ○ | ||
U0164 | ○ | ||
U0293 | ○ | ||
U1110 | ○ | ||
Radio Receiver Assembly | U0073 | ○ | |
U0100 | ○ | ||
U0129 | ○ | ||
U0140 | ○ | ||
U0155 | ○ | ||
U0164 | ○ | ||
U0293 | ○ | ||
U1110 | ○ | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | ○ | |
U0101 | ○ | ||
U0120 | ○ | ||
U0151 | ○ | ||
U0155 | ○ | ||
U0164 | ○ | ||
U0293 | ○ | ||
U0327 | ○ | ||
Clearance Warning ECU Assembly | U0101 | ○ | |
U0155 | ○ | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | ○ | |
U0123 | ○ | ||
U0124 | ○ | ||
U0126 | ○ | ||
U0293 | ○ | ||
Power Steering ECU with Motor Assembly | U0129 | ○ | |
ECM | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | ○ | |
U0142 | ○ | ||
U0155 | ○ | ||
U0293 | ○ | ||
V Bus | Combination Meter Assembly | U0100 | ○ |
U0129 | ○ | ||
U0131 | ○ | ||
U0142 | ○ | ||
U0151 | ○ | ||
Power Management Control ECU (HV CPU) |
- | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | ○ | |
Power Management Control ECU (Gateway Function) |
- | - | |
Steering Sensor | - | - | |
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | - |
U0200 | - | ||
U0208 | - | ||
U0230 | - | ||
U0265 | - | ||
U1002 | - | ||
U1115 | - | ||
Luggage Closer Motor Assembly | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | - | |
Outer Mirror Control ECU Assembly RH | U0142 | - | |
Front Power Seat Switch LH | - | - | |
Front Power Seat Switch RH | - | - | |
Rear Television Camera Assembly | U0100 | ○ | |
U0126 | ○ | ||
U0129 | ○ | ||
U0140 | - | ||
U0163 | ○ | ||
U1110 | ○ | ||
Multiplex Tilt and Telescopic ECU | U0142 | - | |
U0208 | - | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | ○ |
U0126 | ○ | ||
U0129 | ○ | ||
U0142 | ○ | ||
U0293 | ○ | ||
Sub Bus 11 | Driving Support ECU Assembly | U0125 | ○ |
U0126 | ○ | ||
U0129 | ○ | ||
U0142 | ○ | ||
U0293 | ○ | ||
U1100 | - | ||
Power Management Control ECU (HV CPU) |
- | - | |
Power Management Control ECU (Power Management CPU) |
- | - | |
Power Management Control ECU (Gateway Function) |
U0104 | - | |
U0233 | - | ||
U1002 | - | ||
U1100 | - | ||
Seat Belt Control ECU | U0129 | ○ | |
U0140 | ○ | ||
U0151 | ○ | ||
U1104 | - |
○: DTC is output.
-: DTC is not output.
DTC COMBINATION TABLE (OPEN IN CAN BRANCH OF SUB BUS 1, PAST COMMUNICATION ERROR) (for RHD)
Regarding a past communication error of an ECU and sensor connected to sub bus 1 (in this case, normal is displayed when performing the CAN bus check, but communication DTCs are output), determine the part that had a malfunction based on DTCs output from the main body ECU (multiplex network body ECU).
As gateway function equipped ECUs (sub bus monitor ECUs) monitor signals from all ECUs that are connected to sub buses, gateway function equipped ECUs can detect ECUs with a communication stop more accurately.
DTCs output from ECUs other than the main body ECU (multiplex network body ECU) (gateway function equipped ECU) are shown only as a reference.
Regarding a communication stop that is currently occurring in sub bus 1, the malfunctioning part can be confirmed easily by performing the CAN bus check using the GTS.
If an open occurs in just one of the lines of a CAN branch, DTCs which are not related to malfunctioning parts may be output (DTCs may be displayed randomly), or a message indicating a communication error may be displayed.
- | Trouble Mode (Open in One CAN Branch Line) | ||||
---|---|---|---|---|---|
Sub Bus 1 | |||||
Output ECU | Output DTC | Luggage Closer Motor Assembly (Click here) |
Outer Mirror Control ECU Assembly LH (Click here) |
Outer Mirror Control ECU Assembly RH (Click here) |
|
V Bus | Airbag Sensor Assembly | - | - | - | - |
Air Conditioning Amplifier Assembly | U0101 | X | X | X | |
U0131 | X | X | X | ||
U0142 | X | X | X | ||
U0155 | X | X | X | ||
U0163 | X | X | X | ||
U0293 | X | X | X | ||
Multi-media Module Receiver Assembly | U0073 | X | X | X | |
U0100 | X | X | X | ||
U0126 | X | X | X | ||
U0129 | X | X | X | ||
U0131 | X | X | X | ||
U0140 | X | X | X | ||
U0155 | X | X | X | ||
U0164 | X | X | X | ||
U0293 | X | X | X | ||
U1110 | X | X | X | ||
Radio Receiver Assembly | U0073 | X | X | X | |
U0100 | X | X | X | ||
U0129 | X | X | X | ||
U0140 | X | X | X | ||
U0155 | X | X | X | ||
U0164 | X | X | X | ||
U0293 | X | X | X | ||
U1110 | X | X | X | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | X | X | X | |
U0101 | X | X | X | ||
U0120 | X | X | X | ||
U0151 | X | X | X | ||
U0155 | X | X | X | ||
U0164 | X | X | X | ||
U0293 | X | X | X | ||
U0327 | X | X | X | ||
Clearance Warning ECU Assembly | U0101 | X | X | X | |
U0155 | X | X | X | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | X | X | X | |
U0123 | X | X | X | ||
U0124 | X | X | X | ||
U0126 | X | X | X | ||
U0293 | X | X | X | ||
V Bus | Power Steering ECU with Motor Assembly | U0129 | X | X | X |
ECM | - | - | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | X | X | X | |
U0142 | X | X | X | ||
U0155 | X | X | X | ||
U0293 | X | X | X | ||
Combination Meter Assembly | U0100 | X | X | X | |
U0129 | X | X | X | ||
U0131 | X | X | X | ||
U0142 | X | X | X | ||
U0151 | X | X | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | X | X | X | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | |
Steering Sensor | - | - | - | - | |
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | X | X | ▲ |
U0200 | X | ▲ | X | ||
U0208 | X | X | X | ||
U0230 | ▲ | X | X | ||
U0265 | X | X | X | ||
U1002 | X | X | X | ||
U1115 | X | X | X | ||
Luggage Closer Motor Assembly | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | X | ▲ | X | |
Outer Mirror Control ECU Assembly RH | U0142 | X | X | ▲ | |
Front Power Seat Switch LH | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | |
Rear Television Camera Assembly | U0100 | X | X | X | |
U0126 | X | X | X | ||
U0129 | X | X | X | ||
U0140 | X | X | X | ||
U0163 | X | X | X | ||
U1110 | X | X | X | ||
Multiplex Tilt and Telescopic ECU | U0142 | X | X | X | |
U0208 | X | X | X | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | X | X | X |
U0126 | X | X | X | ||
U0129 | X | X | X | ||
U0142 | X | X | X | ||
U0293 | X | X | X | ||
Driving Support ECU Assembly | U0125 | X | X | X | |
U0126 | X | X | X | ||
U0129 | X | X | X | ||
U0142 | X | X | X | ||
U0293 | X | X | X | ||
U1100 | X | X | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | X | X | X | |
U0233 | X | X | X | ||
U1002 | X | X | X | ||
U1100 | X | X | X | ||
Seat Belt Control ECU | U0129 | X | X | X | |
U0140 | X | X | X | ||
U0151 | X | X | X | ||
U1104 | X | X | X |
▲: DTC is likely to be output.
X: DTC is unlikely to be output.
-: DTC is not output.
- | Trouble Mode (Open in One CAN Branch Line) | |||||
---|---|---|---|---|---|---|
Sub Bus 1 | ||||||
Output ECU | Output DTC | Front Power Seat Switch LH (Click here) |
Front Power Seat Switch RH (Click here) |
Multiplex Tilt and Telescopic ECU (Click here) |
Rear Television Camera Assembly (Click here) |
|
V Bus | Airbag Sensor Assembly | - | - | - | - | - |
Air Conditioning Amplifier Assembly | U0101 | X | X | X | X | |
U0131 | X | X | X | X | ||
U0142 | X | X | X | X | ||
U0155 | X | X | X | X | ||
U0163 | X | X | X | X | ||
U0293 | X | X | X | X | ||
V Bus | Multi-media Module Receiver Assembly | U0073 | X | X | X | - |
U0100 | X | X | X | - | ||
U0126 | X | X | X | - | ||
U0129 | X | X | X | - | ||
U0131 | X | X | X | - | ||
U0140 | X | X | X | - | ||
U0155 | X | X | X | - | ||
U0164 | X | X | X | - | ||
U0293 | X | X | X | - | ||
U1110 | X | X | X | - | ||
Radio Receiver Assembly | U0073 | X | X | X | X | |
U0100 | X | X | X | X | ||
U0129 | X | X | X | X | ||
U0140 | X | X | X | X | ||
U0155 | X | X | X | X | ||
U0164 | X | X | X | X | ||
U0293 | X | X | X | X | ||
U1110 | X | X | X | X | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | X | X | X | X | |
U0101 | X | X | X | X | ||
U0120 | X | X | X | X | ||
U0151 | X | X | X | X | ||
U0155 | X | X | X | X | ||
U0164 | X | X | X | X | ||
U0293 | X | X | X | X | ||
U0327 | X | X | X | X | ||
Clearance Warning ECU Assembly | U0101 | X | X | X | X | |
U0155 | X | X | X | X | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | X | X | X | X | |
U0123 | X | X | X | X | ||
U0124 | X | X | X | X | ||
U0126 | X | X | X | X | ||
U0293 | X | X | X | X | ||
Power Steering ECU with Motor Assembly | U0129 | X | X | X | X | |
ECM | - | - | - | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | X | X | X | X | |
U0142 | X | X | X | X | ||
U0155 | X | X | X | X | ||
U0293 | X | X | X | X | ||
Combination Meter Assembly | U0100 | X | X | X | X | |
U0129 | X | X | X | X | ||
U0131 | X | X | X | X | ||
U0142 | X | X | X | X | ||
U0151 | X | X | X | X | ||
V Bus | Power Management Control ECU (HV CPU) |
- | - | - | - | - |
Power Management Control ECU (Power Management CPU) |
U0293 | X | X | X | X | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | - | |
Steering Sensor | - | - | - | - | - | |
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | X | X | X | X |
U0200 | X | X | X | X | ||
U0208 | X | ▲ | X | X | ||
U0230 | X | X | X | X | ||
U0265 | X | X | X | ▲ | ||
U1002 | X | X | X | X | ||
U1115 | X | X | ▲ | X | ||
Luggage Closer Motor Assembly | - | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | X | X | X | X | |
Outer Mirror Control ECU Assembly RH | U0142 | X | X | X | X | |
Front Power Seat Switch LH | - | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | - | |
Rear Television Camera Assembly | U0100 | X | X | X | ▲ | |
U0126 | X | X | X | ▲ | ||
U0129 | X | X | X | ▲ | ||
U0140 | X | X | X | ▲ | ||
U0163 | X | X | X | ▲ | ||
U1110 | X | X | X | ▲ | ||
Multiplex Tilt and Telescopic ECU | U0142 | X | X | ▲ | X | |
U0208 | X | ▲ | ▲ | X | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | X | X | X | X |
U0126 | X | X | X | X | ||
U0129 | X | X | X | X | ||
U0142 | X | X | X | X | ||
U0293 | X | X | X | X | ||
Sub Bus 11 | Driving Support ECU Assembly | U0125 | X | X | X | X |
U0126 | X | X | X | X | ||
U0129 | X | X | X | X | ||
U0142 | X | X | X | X | ||
U0293 | X | X | X | X | ||
U1100 | X | X | X | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | X | X | X | X | |
U0233 | X | X | X | X | ||
U1002 | X | X | X | X | ||
U1100 | X | X | X | X | ||
Seat Belt Control ECU | U0129 | X | X | X | X | |
U0140 | X | X | X | X | ||
U0151 | X | X | X | X | ||
U1104 | X | X | X | X |
▲: DTC is likely to be output.
X: DTC is unlikely to be output.
-: DTC is not output.
- | Trouble Mode (Open in Both CAN Branch Lines) | ||||
---|---|---|---|---|---|
Sub Bus 1 | |||||
Output ECU | Output DTC | Luggage Closer Motor Assembly (Click here) |
Outer Mirror Control ECU Assembly LH (Click here) |
Outer Mirror Control ECU Assembly RH (Click here) |
|
V Bus | Airbag Sensor Assembly | - | - | - | - |
Air Conditioning Amplifier Assembly | U0101 | - | - | - | |
U0131 | - | - | - | ||
U0142 | - | - | - | ||
U0155 | - | - | - | ||
U0163 | - | - | - | ||
U0293 | - | - | - | ||
V Bus | Multi-media Module Receiver Assembly | U0073 | - | - | - |
U0100 | - | - | - | ||
U0126 | - | - | - | ||
U0129 | - | - | - | ||
U0131 | - | - | - | ||
U0140 | - | - | - | ||
U0155 | - | - | - | ||
U0164 | - | - | - | ||
U0293 | - | - | - | ||
U1110 | - | - | - | ||
Radio Receiver Assembly | U0073 | - | - | - | |
U0100 | - | - | - | ||
U0129 | - | - | - | ||
U0140 | - | - | - | ||
U0155 | - | - | - | ||
U0164 | - | - | - | ||
U0293 | - | - | - | ||
U1110 | - | - | - | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | - | - | - | |
U0101 | - | - | - | ||
U0120 | - | - | - | ||
U0151 | - | - | - | ||
U0155 | - | - | - | ||
U0164 | - | - | - | ||
U0293 | - | - | - | ||
U0327 | - | - | - | ||
Clearance Warning ECU Assembly | U0101 | - | - | - | |
U0155 | - | - | - | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | - | - | - | |
U0123 | - | - | - | ||
U0124 | - | - | - | ||
U0126 | - | - | - | ||
U0293 | - | - | - | ||
Power Steering ECU with Motor Assembly | U0129 | - | - | - | |
ECM | - | - | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | - | - | - | |
U0142 | - | - | - | ||
U0155 | - | - | - | ||
U0293 | - | - | - | ||
Combination Meter Assembly | U0100 | - | - | - | |
U0129 | - | - | - | ||
U0131 | - | - | - | ||
U0142 | - | - | - | ||
U0151 | - | - | - | ||
V Bus | Power Management Control ECU (HV CPU) |
- | - | - | - |
Power Management Control ECU (Power Management CPU) |
U0293 | - | - | - | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | |
Steering Sensor | - | - | - | - | |
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | - | - | ○ |
U0200 | - | ○ | - | ||
U0208 | - | - | - | ||
U0230 | ○ | - | - | ||
U0265 | - | - | - | ||
U1002 | - | - | - | ||
U1115 | - | - | - | ||
Luggage Closer Motor Assembly | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | - | ○ | - | |
Outer Mirror Control ECU Assembly RH | U0142 | - | - | ○ | |
Front Power Seat Switch LH | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | |
Rear Television Camera Assembly | U0100 | - | - | - | |
U0126 | - | - | - | ||
U0129 | - | - | - | ||
U0140 | - | - | - | ||
U0163 | - | - | - | ||
U1110 | - | - | - | ||
Multiplex Tilt and Telescopic ECU | U0142 | - | - | - | |
U0208 | - | - | - | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | - | - | - |
U0126 | - | - | - | ||
U0129 | - | - | - | ||
U0142 | - | - | - | ||
U0293 | - | - | - | ||
Driving Support ECU Assembly | U0125 | - | - | - | |
U0126 | - | - | - | ||
U0129 | - | - | - | ||
U0142 | - | - | - | ||
U0293 | - | - | - | ||
U1100 | - | - | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Sub Bus 11 | Power Management Control ECU (Power Management CPU) |
- | - | - | - |
Power Management Control ECU (Gateway Function) |
U0104 | - | - | - | |
U0233 | - | - | - | ||
U1002 | - | - | - | ||
U1100 | - | - | - | ||
Seat Belt Control ECU | U0129 | - | - | - | |
U0140 | - | - | - | ||
U0151 | - | - | - | ||
U1104 | - | - | - |
○: DTC is output.
-: DTC is not output.
- | Trouble Mode (Open in Both CAN Branch Lines) | |||||
---|---|---|---|---|---|---|
Sub Bus 1 | ||||||
Output ECU | Output DTC | Front Power Seat Switch LH (Click here) |
Front Power Seat Switch RH (Click here) |
Multiplex Tilt and Telescopic ECU (Click here) |
Rear Television Camera Assembly (Click here) |
|
V Bus | Airbag Sensor Assembly | - | - | - | - | - |
Air Conditioning Amplifier Assembly | U0101 | - | - | - | - | |
U0131 | - | - | - | - | ||
U0142 | - | - | - | - | ||
U0155 | - | - | - | - | ||
U0163 | - | - | - | - | ||
U0293 | - | - | - | - | ||
Multi-media Module Receiver Assembly | U0073 | - | - | - | - | |
U0100 | - | - | - | - | ||
U0126 | - | - | - | - | ||
U0129 | - | - | - | - | ||
U0131 | - | - | - | - | ||
U0140 | - | - | - | - | ||
U0155 | - | - | - | - | ||
U0164 | - | - | - | - | ||
U0293 | - | - | - | - | ||
U1110 | - | - | - | - | ||
Radio Receiver Assembly | U0073 | - | - | - | - | |
U0100 | - | - | - | - | ||
U0129 | - | - | - | - | ||
U0140 | - | - | - | - | ||
U0155 | - | - | - | - | ||
U0164 | - | - | - | - | ||
U0293 | - | - | - | - | ||
U1110 | - | - | - | - | ||
V Bus | Main Body ECU (Multiplex Network Body ECU) | U0100 | - | - | - | - |
U0101 | - | - | - | - | ||
U0120 | - | - | - | - | ||
U0151 | - | - | - | - | ||
U0155 | - | - | - | - | ||
U0164 | - | - | - | - | ||
U0293 | - | - | - | - | ||
U0327 | - | - | - | - | ||
Clearance Warning ECU Assembly | U0101 | - | - | - | - | |
U0155 | - | - | - | - | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | - | - | - | - | |
U0123 | - | - | - | - | ||
U0124 | - | - | - | - | ||
U0126 | - | - | - | - | ||
U0293 | - | - | - | - | ||
Power Steering ECU with Motor Assembly | U0129 | - | - | - | - | |
ECM | - | - | - | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | - | - | - | - | |
U0142 | - | - | - | - | ||
U0155 | - | - | - | - | ||
U0293 | - | - | - | - | ||
Combination Meter Assembly | U0100 | - | - | - | - | |
U0129 | - | - | - | - | ||
U0131 | - | - | - | - | ||
U0142 | - | - | - | - | ||
U0151 | - | - | - | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | - | - | - | - | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | - | |
Steering Sensor | - | - | - | - | - | |
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | - | - | - | - |
U0200 | - | - | - | - | ||
U0208 | - | ○ | - | - | ||
U0230 | - | - | - | - | ||
U0265 | - | - | - | ○ | ||
U1002 | - | - | - | - | ||
U1115 | - | - | ○ | - | ||
Luggage Closer Motor Assembly | - | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | - | - | - | - | |
Outer Mirror Control ECU Assembly RH | U0142 | - | - | - | - | |
Front Power Seat Switch LH | - | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | - | |
Rear Television Camera Assembly | U0100 | - | - | - | ○ | |
U0126 | - | - | - | ○ | ||
U0129 | - | - | - | ○ | ||
U0140 | - | - | - | ○ | ||
U0163 | - | - | - | ○ | ||
U1110 | - | - | - | ○ | ||
Multiplex Tilt and Telescopic ECU | U0142 | - | - | ○ | - | |
U0208 | - | ○ | ○ | - | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | - | - | - | - |
U0126 | - | - | - | - | ||
U0129 | - | - | - | - | ||
U0142 | - | - | - | - | ||
U0293 | - | - | - | - | ||
Driving Support ECU Assembly | U0125 | - | - | - | - | |
U0126 | - | - | - | - | ||
U0129 | - | - | - | - | ||
U0142 | - | - | - | - | ||
U0293 | - | - | - | - | ||
U1100 | - | - | - | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | - | |
Sub Bus 11 | Power Management Control ECU (Gateway Function) |
U0104 | - | - | - | - |
U0233 | - | - | - | - | ||
U1002 | - | - | - | - | ||
U1100 | - | - | - | - | ||
Seat Belt Control ECU | U0129 | - | - | - | - | |
U0140 | - | - | - | - | ||
U0151 | - | - | - | - | ||
U1104 | - | - | - | - |
○: DTC is output.
-: DTC is not output.
- | Trouble Mode (Open in One CAN Main Bus Line) | ||||
---|---|---|---|---|---|
Sub Bus 1 | |||||
Output ECU | Output DTC | Main Body ECU (Multiplex Network Body ECU) (Click here) |
CAN J/C LH2 to CAN J/C RH2 | CAN J/C RH2 to CAN No. 2 J/C | |
V Bus | Airbag Sensor Assembly | - | - | - | - |
Air Conditioning Amplifier Assembly | U0101 | X | X | X | |
U0131 | X | X | X | ||
U0142 | X | X | X | ||
U0155 | X | X | X | ||
U0163 | X | X | X | ||
U0293 | X | X | X | ||
Multi-media Module Receiver Assembly | U0073 | X | X | X | |
U0100 | X | X | X | ||
U0126 | X | X | X | ||
U0129 | X | X | X | ||
U0131 | X | X | X | ||
U0140 | X | X | X | ||
U0155 | X | X | X | ||
U0164 | X | X | X | ||
U0293 | X | X | X | ||
U1110 | X | X | X | ||
Radio Receiver Assembly | U0073 | X | X | X | |
U0100 | X | X | X | ||
U0129 | X | X | X | ||
U0140 | X | X | X | ||
U0155 | X | X | X | ||
U0164 | X | X | X | ||
U0293 | X | X | X | ||
U1110 | X | X | X | ||
V Bus | Main Body ECU (Multiplex Network Body ECU) | U0100 | X | X | X |
U0101 | X | X | X | ||
U0120 | X | X | X | ||
U0151 | X | X | X | ||
U0155 | X | X | X | ||
U0164 | X | X | X | ||
U0293 | X | X | X | ||
U0327 | X | X | X | ||
Clearance Warning ECU Assembly | U0101 | X | X | X | |
U0155 | X | X | X | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | X | X | X | |
U0123 | X | X | X | ||
U0124 | X | X | X | ||
U0126 | X | X | X | ||
U0293 | X | X | X | ||
Power Steering ECU with Motor Assembly | U0129 | X | X | X | |
ECM | - | - | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | X | X | X | |
U0142 | X | X | X | ||
U0155 | X | X | X | ||
U0293 | X | X | X | ||
Combination Meter Assembly | U0100 | X | X | X | |
U0129 | X | X | X | ||
U0131 | X | X | X | ||
U0142 | X | X | X | ||
U0151 | X | X | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | X | X | X | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | |
Steering Sensor | - | - | - | - | |
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | ▲ | ▲ | X |
U0200 | ▲ | X | X | ||
U0208 | ▲ | ▲ | X | ||
U0230 | ▲ | ▲ | X | ||
U0265 | ▲ | ▲ | X | ||
U1002 | ▲ | X | X | ||
U1115 | ▲ | ▲ | X | ||
Luggage Closer Motor Assembly | - | - | - | - | |
Sub Bus 1 | Outer Mirror Control ECU Assembly LH | U0142 | ▲ | X | X |
Outer Mirror Control ECU Assembly RH | U0142 | ▲ | ▲ | X | |
Front Power Seat Switch LH | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | |
Rear Television Camera Assembly | U0100 | ▲ | ▲ | X | |
U0126 | ▲ | ▲ | X | ||
U0129 | ▲ | ▲ | X | ||
U0140 | ▲ | ▲ | X | ||
U0163 | ▲ | ▲ | X | ||
U1110 | ▲ | ▲ | X | ||
Multiplex Tilt and Telescopic ECU | U0142 | ▲ | ▲ | X | |
U0208 | X | X | X | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | X | X | X |
U0126 | X | X | X | ||
U0129 | X | X | X | ||
U0142 | X | X | X | ||
U0293 | X | X | X | ||
Driving Support ECU Assembly | U0125 | X | X | X | |
U0126 | X | X | X | ||
U0129 | X | X | X | ||
U0142 | X | X | X | ||
U0293 | X | X | X | ||
U1100 | X | X | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | X | X | X | |
U0233 | X | X | X | ||
U1002 | X | X | X | ||
U1100 | X | X | X | ||
Seat Belt Control ECU | U0129 | X | X | X | |
U0140 | X | X | X | ||
U0151 | X | X | X | ||
U1104 | X | X | X |
▲: DTC is likely to be output.
X: DTC is unlikely to be output.
-: DTC is not output.
- | Trouble Mode (Open in Both CAN Main Bus Lines) | ||||
---|---|---|---|---|---|
Sub Bus 1 | |||||
Output ECU | Output DTC | Main Body ECU (Multiplex Network Body ECU) (Click here) |
CAN J/C LH2 to CAN J/C RH2 | CAN J/C RH2 to CAN No. 2 J/C | |
V Bus | Airbag Sensor Assembly | - | - | - | - |
Air Conditioning Amplifier Assembly | U0101 | - | - | - | |
U0131 | - | - | - | ||
U0142 | - | - | - | ||
U0155 | - | - | - | ||
U0163 | - | - | - | ||
U0293 | - | - | - | ||
Multi-media Module Receiver Assembly | U0073 | - | - | - | |
U0100 | - | - | - | ||
U0126 | - | - | - | ||
U0129 | - | - | - | ||
U0131 | - | - | - | ||
U0140 | - | - | - | ||
U0155 | - | - | - | ||
U0164 | - | - | - | ||
U0293 | - | - | - | ||
U1110 | - | - | - | ||
Radio Receiver Assembly | U0073 | - | - | - | |
U0100 | - | - | - | ||
U0129 | - | - | - | ||
U0140 | - | - | - | ||
U0155 | - | - | - | ||
U0164 | - | - | - | ||
U0293 | - | - | - | ||
U1110 | - | - | - | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | - | - | - | |
U0101 | - | - | - | ||
U0120 | - | - | - | ||
U0151 | - | - | - | ||
U0155 | - | - | - | ||
U0164 | - | - | - | ||
U0293 | - | - | - | ||
U0327 | - | - | - | ||
Clearance Warning ECU Assembly | U0101 | - | - | - | |
U0155 | - | - | - | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | - | - | - | |
U0123 | - | - | - | ||
U0124 | - | - | - | ||
U0126 | - | - | - | ||
U0293 | - | - | - | ||
Power Steering ECU with Motor Assembly | U0129 | - | - | - | |
ECM | - | - | - | - | |
V Bus | Certification ECU (Smart Key ECU Assembly) | U0100 | - | - | - |
U0142 | - | - | - | ||
U0155 | - | - | - | ||
U0293 | - | - | - | ||
Combination Meter Assembly | U0100 | - | - | - | |
U0129 | - | - | - | ||
U0131 | - | - | - | ||
U0142 | - | - | - | ||
U0151 | - | - | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | - | - | - | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | |
Steering Sensor | - | - | - | - | |
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | ○ | ○ | - |
U0200 | ○ | - | - | ||
U0208 | ○ | ○ | - | ||
U0230 | ○ | ○ | - | ||
U0265 | ○ | ○ | - | ||
U1002 | ○ | - | - | ||
U1115 | ○ | ○ | - | ||
Luggage Closer Motor Assembly | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | ○ | - | - | |
Outer Mirror Control ECU Assembly RH | U0142 | ○ | ○ | - | |
Front Power Seat Switch LH | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | |
Rear Television Camera Assembly | U0100 | ○ | ○ | - | |
U0126 | ○ | ○ | - | ||
U0129 | ○ | ○ | - | ||
U0140 | ○ | ○ | - | ||
U0163 | ○ | ○ | - | ||
U1110 | ○ | ○ | - | ||
Multiplex Tilt and Telescopic ECU | U0142 | ○ | ○ | - | |
U0208 | - | - | - | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | - | - | - |
U0126 | - | - | - | ||
U0129 | - | - | - | ||
U0142 | - | - | - | ||
U0293 | - | - | - | ||
Driving Support ECU Assembly | U0125 | - | - | - | |
U0126 | - | - | - | ||
U0129 | - | - | - | ||
U0142 | - | - | - | ||
U0293 | - | - | - | ||
U1100 | - | - | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | - | - | - | |
U0233 | - | - | - | ||
U1002 | - | - | - | ||
U1100 | - | - | - | ||
Seat Belt Control ECU | U0129 | - | - | - | |
U0140 | - | - | - | ||
U0151 | - | - | - | ||
U1104 | - | - | - |
○: DTC is output.
-: DTC is not output.
- | Trouble Mode (CAN Bus Line Short Circuit or Short to GND) | ||
---|---|---|---|
Sub Bus 1 | |||
Output ECU | Output DTC | CANH - CANL CANH - Ground Short CANL - Ground Short |
|
V Bus | Airbag Sensor Assembly | - | - |
Air Conditioning Amplifier Assembly | U0101 | - | |
U0131 | - | ||
U0142 | - | ||
U0155 | - | ||
U0163 | - | ||
U0293 | - | ||
V Bus | Multi-media Module Receiver Assembly | U0073 | - |
U0100 | - | ||
U0126 | - | ||
U0129 | - | ||
U0131 | - | ||
U0140 | - | ||
U0155 | - | ||
U0164 | - | ||
U0293 | - | ||
U1110 | - | ||
Radio Receiver Assembly | U0073 | - | |
U0100 | - | ||
U0129 | - | ||
U0140 | - | ||
U0155 | - | ||
U0164 | - | ||
U0293 | - | ||
U1110 | - | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | - | |
U0101 | - | ||
U0120 | - | ||
U0151 | - | ||
U0155 | - | ||
U0164 | - | ||
U0293 | - | ||
U0327 | - | ||
Clearance Warning ECU Assembly | U0101 | - | |
U0155 | - | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | - | |
U0123 | - | ||
U0124 | - | ||
U0126 | - | ||
U0293 | - | ||
Power Steering ECU with Motor Assembly | U0129 | - | |
ECM | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | - | |
U0142 | - | ||
U0155 | - | ||
U0293 | - | ||
Combination Meter Assembly | U0100 | - | |
U0129 | - | ||
U0131 | - | ||
U0142 | - | ||
U0151 | - | ||
V Bus | Power Management Control ECU (HV CPU) |
- | - |
Power Management Control ECU (Power Management CPU) |
U0293 | - | |
Power Management Control ECU (Gateway Function) |
- | - | |
Steering Sensor | - | - | |
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | ○ |
U0200 | ○ | ||
U0208 | ○ | ||
U0230 | ○ | ||
U0265 | ○ | ||
U1002 | ○ | ||
U1115 | ○ | ||
Luggage Closer Motor Assembly | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | ○ | |
Outer Mirror Control ECU Assembly RH | U0142 | ○ | |
Front Power Seat Switch LH | - | - | |
Front Power Seat Switch RH | - | - | |
Rear Television Camera Assembly | U0100 | ○ | |
U0126 | ○ | ||
U0129 | ○ | ||
U0140 | ○ | ||
U0163 | ○ | ||
U1110 | ○ | ||
Multiplex Tilt and Telescopic ECU | U0142 | ○ | |
U0208 | ○ | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | - |
U0126 | - | ||
U0129 | - | ||
U0142 | - | ||
U0293 | - | ||
Driving Support ECU Assembly | U0125 | - | |
U0126 | - | ||
U0129 | - | ||
U0142 | - | ||
U0293 | - | ||
U1100 | - | ||
Sub Bus 11 | Power Management Control ECU (HV CPU) |
- | - |
Power Management Control ECU (Power Management CPU) |
- | - | |
Power Management Control ECU (Gateway Function) |
U0104 | - | |
U0233 | - | ||
U1002 | - | ||
U1100 | - | ||
Seat Belt Control ECU | U0129 | - | |
U0140 | - | ||
U0151 | - | ||
U1104 | - |
○: DTC is output.
-: DTC is not output.
DTC COMBINATION TABLE (OPEN IN CAN BRANCH OF SUB BUS 11, PAST COMMUNICATION ERROR) (for RHD)
Regarding a past communication error of an ECU and sensor connected to sub bus 11 (in this case, normal is displayed when performing the CAN bus check, but communication DTCs are output), determine the part that had a malfunction based on DTCs output from the power management control ECU.
As gateway function equipped ECUs (sub bus monitor ECUs) monitor signals from all ECUs that are connected to sub buses, gateway function equipped ECUs can detect ECUs with a communication stop more accurately.
DTCs output from ECUs other than the power management control ECU (gateway function equipped ECU) are shown only as a reference.
Regarding a communication stop that is currently occurring in sub bus 11, the malfunctioning part can be confirmed easily by performing the CAN bus check using the GTS.
If an open occurs in just one of the lines of a CAN branch, DTCs which are not related to malfunctioning parts may be output (DTCs may be displayed randomly), or a message indicating a communication error may be displayed.
- | Trouble Mode (Open in One CAN Branch Line) | ||||
---|---|---|---|---|---|
Sub Bus 11 | |||||
Output ECU | Output DTC | Blind Spot Monitor Sensor LH (Click here) |
Driving Support ECU Assembly (Click here) |
Seat Belt Control ECU (Click here) |
|
V Bus | Airbag Sensor Assembly | - | - | - | - |
Air Conditioning Amplifier Assembly | U0101 | X | X | X | |
U0131 | X | X | X | ||
U0142 | X | X | X | ||
U0155 | X | X | X | ||
U0163 | X | X | X | ||
U0293 | X | X | X | ||
Multi-media Module Receiver Assembly | U0073 | X | X | X | |
U0100 | X | X | X | ||
U0126 | X | X | X | ||
U0129 | X | X | X | ||
U0131 | X | X | X | ||
U0140 | X | X | X | ||
U0155 | X | X | X | ||
U0164 | X | X | X | ||
U0293 | X | X | X | ||
U1110 | X | X | X | ||
Radio Receiver Assembly | U0073 | X | X | X | |
U0100 | X | X | X | ||
U0129 | X | X | X | ||
U0140 | X | X | X | ||
U0155 | X | X | X | ||
U0164 | X | X | X | ||
U0293 | X | X | X | ||
U1110 | X | X | X | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | X | X | X | |
U0101 | X | X | X | ||
U0120 | X | X | X | ||
U0151 | X | X | X | ||
U0155 | X | X | X | ||
U0164 | X | X | X | ||
U0293 | X | X | X | ||
U0327 | X | X | X | ||
Clearance Warning ECU Assembly | U0101 | X | X | X | |
U0155 | X | X | X | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | X | X | X | |
U0123 | X | X | X | ||
U0124 | X | X | X | ||
U0126 | X | X | X | ||
U0293 | X | X | X | ||
Power Steering ECU with Motor Assembly | U0129 | X | X | X | |
ECM | - | - | - | - | |
V Bus | Certification ECU (Smart Key ECU Assembly) | U0100 | X | X | X |
U0142 | X | X | X | ||
U0155 | X | X | X | ||
U0293 | X | X | X | ||
Combination Meter Assembly | U0100 | X | X | X | |
U0129 | X | X | X | ||
U0131 | X | X | X | ||
U0142 | X | X | X | ||
U0151 | X | X | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | X | X | X | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | |
Steering Sensor | - | - | - | - | |
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | X | X | X |
U0200 | X | X | X | ||
U0208 | X | X | X | ||
U0230 | X | X | X | ||
U0265 | X | X | X | ||
U1002 | X | X | X | ||
U1115 | X | X | X | ||
Luggage Closer Motor Assembly | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | X | X | X | |
Outer Mirror Control ECU Assembly RH | U0142 | X | X | X | |
Front Power Seat Switch LH | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | |
Rear Television Camera Assembly | U0100 | X | X | X | |
U0126 | X | X | X | ||
U0129 | X | X | X | ||
U0140 | X | X | X | ||
U0163 | X | X | X | ||
U1110 | X | X | X | ||
Multiplex Tilt and Telescopic ECU | U0142 | X | X | X | |
U0208 | X | X | X | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | ▲ | X | X |
U0126 | ▲ | X | X | ||
U0129 | ▲ | X | X | ||
U0142 | ▲ | X | X | ||
U0293 | ▲ | X | X | ||
Driving Support ECU Assembly | U0125 | X | ▲ | X | |
U0126 | X | ▲ | X | ||
U0129 | X | ▲ | X | ||
U0142 | X | ▲ | X | ||
U0293 | X | ▲ | X | ||
U1100 | X | ▲ | ▲ | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | X | ▲ | X | |
U0233 | ▲ | X | X | ||
U1002 | X | X | X | ||
U1100 | X | X | ▲ | ||
Seat Belt Control ECU | U0129 | X | X | ▲ | |
U0140 | X | X | ▲ | ||
U0151 | X | X | ▲ | ||
U1104 | X | ▲ | ▲ |
▲: DTC is likely to be output.
X: DTC is unlikely to be output.
-: DTC is not output.
- | Trouble Mode (Open in Both CAN Branch Lines) | ||||
---|---|---|---|---|---|
Sub Bus 11 | |||||
Output ECU | Output DTC | Blind Spot Monitor Sensor LH (Click here) |
Driving Support ECU Assembly (Click here) |
Seat Belt Control ECU (Click here) |
|
V Bus | Airbag Sensor Assembly | - | - | - | - |
Air Conditioning Amplifier Assembly | U0101 | - | - | - | |
U0131 | - | - | - | ||
U0142 | - | - | - | ||
U0155 | - | - | - | ||
U0163 | - | - | - | ||
U0293 | - | - | - | ||
Multi-media Module Receiver Assembly | U0073 | - | - | - | |
U0100 | - | - | - | ||
U0126 | - | - | - | ||
U0129 | - | - | - | ||
U0131 | - | - | - | ||
U0140 | - | - | - | ||
U0155 | - | - | - | ||
U0164 | - | - | - | ||
U0293 | - | - | - | ||
U1110 | - | - | - | ||
V Bus | Radio Receiver Assembly | U0073 | - | - | - |
U0100 | - | - | - | ||
U0129 | - | - | - | ||
U0140 | - | - | - | ||
U0155 | - | - | - | ||
U0164 | - | - | - | ||
U0293 | - | - | - | ||
U1110 | - | - | - | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | - | - | - | |
U0101 | - | - | - | ||
U0120 | - | - | - | ||
U0151 | - | - | - | ||
U0155 | - | - | - | ||
U0164 | - | - | - | ||
U0293 | - | - | - | ||
U0327 | - | - | - | ||
Clearance Warning ECU Assembly | U0101 | - | - | - | |
U0155 | - | - | - | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | - | - | - | |
U0123 | - | - | - | ||
U0124 | - | - | - | ||
U0126 | - | - | - | ||
U0293 | - | - | - | ||
Power Steering ECU with Motor Assembly | U0129 | - | - | - | |
ECM | - | - | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | - | - | - | |
U0142 | - | - | - | ||
U0155 | - | - | - | ||
U0293 | - | - | - | ||
Combination Meter Assembly | U0100 | - | - | - | |
U0129 | - | - | - | ||
U0131 | - | - | - | ||
U0142 | - | - | - | ||
U0151 | - | - | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | - | - | - | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | |
Steering Sensor | - | - | - | - | |
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | - | - | - |
U0200 | - | - | - | ||
U0208 | - | - | - | ||
U0230 | - | - | - | ||
U0265 | - | - | - | ||
U1002 | - | - | - | ||
U1115 | - | - | - | ||
Luggage Closer Motor Assembly | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | - | - | - | |
Outer Mirror Control ECU Assembly RH | U0142 | - | - | - | |
Front Power Seat Switch LH | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | |
Rear Television Camera Assembly | U0100 | - | - | - | |
U0126 | - | - | - | ||
U0129 | - | - | - | ||
U0140 | - | - | - | ||
U0163 | - | - | - | ||
U1110 | - | - | - | ||
Multiplex Tilt and Telescopic ECU | U0142 | - | - | - | |
U0208 | - | - | - | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | ○ | - | - |
U0126 | ○ | - | - | ||
U0129 | ○ | - | - | ||
U0142 | ○ | - | - | ||
U0293 | ○ | - | - | ||
Driving Support ECU Assembly | U0125 | - | ○ | - | |
U0126 | - | ○ | - | ||
U0129 | - | ○ | - | ||
U0142 | - | ○ | - | ||
U0293 | - | ○ | - | ||
U1100 | - | ○ | ○ | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | - | ○ | - | |
U0233 | ○ | - | - | ||
U1002 | - | - | - | ||
U1100 | - | - | ○ | ||
Sub Bus 11 | Seat Belt Control ECU | U0129 | - | - | ○ |
U0140 | - | - | ○ | ||
U0151 | - | - | ○ | ||
U1104 | - | ○ | ○ |
○: DTC is output.
-: DTC is not output.
- | Trouble Mode (Open in One CAN Main Bus Line) | ||||
---|---|---|---|---|---|
Sub Bus 11 | |||||
Output ECU | Output DTC | Power Management Control ECU (Click here) |
CAN J/C RH3 to CAN No. 4 J/C | CAN J/C No. 4 to CAN J/C No. 5 | |
V Bus | Airbag Sensor Assembly | - | - | - | - |
Air Conditioning Amplifier Assembly | U0101 | X | X | X | |
U0131 | X | X | X | ||
U0142 | X | X | X | ||
U0155 | X | X | X | ||
U0163 | X | X | X | ||
U0293 | X | X | X | ||
Multi-media Module Receiver Assembly | U0073 | X | X | X | |
U0100 | X | X | X | ||
U0126 | X | X | X | ||
U0129 | X | X | X | ||
U0131 | X | X | X | ||
U0140 | X | X | X | ||
U0155 | X | X | X | ||
U0164 | X | X | X | ||
U0293 | X | X | X | ||
U1110 | X | X | X | ||
Radio Receiver Assembly | U0073 | X | X | X | |
U0100 | X | X | X | ||
U0129 | X | X | X | ||
U0140 | X | X | X | ||
U0155 | X | X | X | ||
U0164 | X | X | X | ||
U0293 | X | X | X | ||
U1110 | X | X | X | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | X | X | X | |
U0101 | X | X | X | ||
U0120 | X | X | X | ||
U0151 | X | X | X | ||
U0155 | X | X | X | ||
U0164 | X | X | X | ||
U0293 | X | X | X | ||
U0327 | X | X | X | ||
V Bus | Clearance Warning ECU Assembly | U0101 | X | X | X |
U0155 | X | X | X | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | X | X | X | |
U0123 | X | X | X | ||
U0124 | X | X | X | ||
U0126 | X | X | X | ||
U0293 | X | X | X | ||
Power Steering ECU with Motor Assembly | U0129 | X | X | X | |
ECM | - | - | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | X | X | X | |
U0142 | X | X | X | ||
U0155 | X | X | X | ||
U0293 | X | X | X | ||
Combination Meter Assembly | U0100 | X | X | X | |
U0129 | X | X | X | ||
U0131 | X | X | X | ||
U0142 | X | X | X | ||
U0151 | X | X | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | X | X | X | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | |
Steering Sensor | - | - | - | - | |
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | X | X | X |
U0200 | X | X | X | ||
U0208 | X | X | X | ||
U0230 | X | X | X | ||
U0265 | X | X | X | ||
U1002 | X | X | X | ||
U1115 | X | X | X | ||
Luggage Closer Motor Assembly | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | X | X | X | |
Outer Mirror Control ECU Assembly RH | U0142 | X | X | X | |
Front Power Seat Switch LH | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | |
Sub Bus 1 | Rear Television Camera Assembly | U0100 | X | X | X |
U0126 | X | X | X | ||
U0129 | X | X | X | ||
U0140 | X | X | X | ||
U0163 | X | X | X | ||
U1110 | X | X | X | ||
Multiplex Tilt and Telescopic ECU | U0142 | X | X | X | |
U0208 | X | X | X | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | ▲ | ▲ | X |
U0126 | ▲ | ▲ | X | ||
U0129 | ▲ | ▲ | X | ||
U0142 | ▲ | ▲ | X | ||
U0293 | ▲ | ▲ | X | ||
Driving Support ECU Assembly | U0125 | ▲ | X | X | |
U0126 | ▲ | X | X | ||
U0129 | ▲ | X | X | ||
U0142 | ▲ | X | X | ||
U0293 | ▲ | X | X | ||
U1100 | X | X | X | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | ▲ | X | X | |
U0233 | ▲ | ▲ | X | ||
U1002 | ▲ | X | X | ||
U1100 | ▲ | X | X | ||
Seat Belt Control ECU | U0129 | ▲ | X | X | |
U0140 | ▲ | X | X | ||
U0151 | ▲ | X | X | ||
U1104 | X | X | X |
▲: DTC is likely to be output.
X: DTC is unlikely to be output.
-: DTC is not output.
- | Trouble Mode (Open in Both CAN Main Bus Lines) | ||||
---|---|---|---|---|---|
Sub Bus 11 | |||||
Output ECU | Output DTC | Power Management Control ECU (Click here) |
CAN J/C RH3 to CAN No. 4 J/C | CAN J/C No. 4 to CAN J/C No. 5 | |
V Bus | Airbag Sensor Assembly | - | - | - | - |
V Bus | Air Conditioning Amplifier Assembly | U0101 | - | - | - |
U0131 | - | - | - | ||
U0142 | - | - | - | ||
U0155 | - | - | - | ||
U0163 | - | - | - | ||
U0293 | - | - | - | ||
Multi-media Module Receiver Assembly | U0073 | - | - | - | |
U0100 | - | - | - | ||
U0126 | - | - | - | ||
U0129 | - | - | - | ||
U0131 | - | - | - | ||
U0140 | - | - | - | ||
U0155 | - | - | - | ||
U0164 | - | - | - | ||
U0293 | - | - | - | ||
U1110 | - | - | - | ||
Radio Receiver Assembly | U0073 | - | - | - | |
U0100 | - | - | - | ||
U0129 | - | - | - | ||
U0140 | - | - | - | ||
U0155 | - | - | - | ||
U0164 | - | - | - | ||
U0293 | - | - | - | ||
U1110 | - | - | - | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | - | - | - | |
U0101 | - | - | - | ||
U0120 | - | - | - | ||
U0151 | - | - | - | ||
U0155 | - | - | - | ||
U0164 | - | - | - | ||
U0293 | - | - | - | ||
U0327 | - | - | - | ||
Clearance Warning ECU Assembly | U0101 | - | - | - | |
U0155 | - | - | - | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | - | - | - | |
U0123 | - | - | - | ||
U0124 | - | - | - | ||
U0126 | - | - | - | ||
U0293 | - | - | - | ||
Power Steering ECU with Motor Assembly | U0129 | - | - | - | |
ECM | - | - | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | - | - | - | |
U0142 | - | - | - | ||
U0155 | - | - | - | ||
U0293 | - | - | - | ||
V Bus | Combination Meter Assembly | U0100 | - | - | - |
U0129 | - | - | - | ||
U0131 | - | - | - | ||
U0142 | - | - | - | ||
U0151 | - | - | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | - | - | - | |
Power Management Control ECU (Gateway Function) |
- | - | - | - | |
Steering Sensor | - | - | - | - | |
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | - | - | - |
U0200 | - | - | - | ||
U0208 | - | - | - | ||
U0230 | - | - | - | ||
U0265 | - | - | - | ||
U1002 | - | - | - | ||
U1115 | - | - | - | ||
Luggage Closer Motor Assembly | - | - | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | - | - | - | |
Outer Mirror Control ECU Assembly RH | U0142 | - | - | - | |
Front Power Seat Switch LH | - | - | - | - | |
Front Power Seat Switch RH | - | - | - | - | |
Rear Television Camera Assembly | U0100 | - | - | - | |
U0126 | - | - | - | ||
U0129 | - | - | - | ||
U0140 | - | - | - | ||
U0163 | - | - | - | ||
U1110 | - | - | - | ||
Multiplex Tilt and Telescopic ECU | U0142 | - | - | - | |
U0208 | - | - | - | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | ○ | ○ | - |
U0126 | ○ | ○ | - | ||
U0129 | ○ | ○ | - | ||
U0142 | ○ | ○ | - | ||
U0293 | ○ | ○ | - | ||
Sub Bus 11 | Driving Support ECU Assembly | U0125 | ○ | - | - |
U0126 | ○ | - | - | ||
U0129 | ○ | - | - | ||
U0142 | ○ | - | - | ||
U0293 | ○ | - | - | ||
U1100 | - | - | - | ||
Power Management Control ECU (HV CPU) |
- | - | - | - | |
Power Management Control ECU (Power Management CPU) |
- | - | - | - | |
Power Management Control ECU (Gateway Function) |
U0104 | ○ | - | - | |
U0233 | ○ | ○ | - | ||
U1002 | ○ | - | - | ||
U1100 | ○ | - | - | ||
Seat Belt Control ECU | U0129 | ○ | - | - | |
U0140 | ○ | - | - | ||
U0151 | ○ | - | - | ||
U1104 | - | - | - |
○: DTC is output.
-: DTC is not output.
- | Trouble Mode (CAN Bus Line Short Circuit or Short to GND) | ||
---|---|---|---|
Sub Bus 11 | |||
Output ECU | Output DTC | CANH - CANL CANH - Ground Short CANL - Ground Short |
|
V Bus | Airbag Sensor Assembly | - | - |
Air Conditioning Amplifier Assembly | U0101 | - | |
U0131 | - | ||
U0142 | - | ||
U0155 | - | ||
U0163 | - | ||
U0293 | - | ||
Multi-media Module Receiver Assembly | U0073 | - | |
U0100 | - | ||
U0126 | - | ||
U0129 | - | ||
U0131 | - | ||
U0140 | - | ||
U0155 | - | ||
U0164 | - | ||
U0293 | - | ||
U1110 | - | ||
V Bus | Radio Receiver Assembly | U0073 | - |
U0100 | - | ||
U0129 | - | ||
U0140 | - | ||
U0155 | - | ||
U0164 | - | ||
U0293 | - | ||
U1110 | - | ||
Main Body ECU (Multiplex Network Body ECU) | U0100 | - | |
U0101 | - | ||
U0120 | - | ||
U0151 | - | ||
U0155 | - | ||
U0164 | - | ||
U0293 | - | ||
U0327 | - | ||
Clearance Warning ECU Assembly | U0101 | - | |
U0155 | - | ||
Brake Booster with Master Cylinder Assembly (Skid Control ECU) | U0073 | - | |
U0123 | - | ||
U0124 | - | ||
U0126 | - | ||
U0293 | - | ||
Power Steering ECU with Motor Assembly | U0129 | - | |
ECM | - | - | |
Certification ECU (Smart Key ECU Assembly) | U0100 | - | |
U0142 | - | ||
U0155 | - | ||
U0293 | - | ||
Combination Meter Assembly | U0100 | - | |
U0129 | - | ||
U0131 | - | ||
U0142 | - | ||
U0151 | - | ||
Power Management Control ECU (HV CPU) |
- | - | |
Power Management Control ECU (Power Management CPU) |
U0293 | - | |
Power Management Control ECU (Gateway Function) |
- | - | |
Steering Sensor | - | - | |
Sub Bus 1 | Main Body ECU (Multiplex Network Body ECU) (Gateway Function) |
U0199 | - |
U0200 | - | ||
U0208 | - | ||
U0230 | - | ||
U0265 | - | ||
U1002 | - | ||
U1115 | - | ||
Luggage Closer Motor Assembly | - | - | |
Outer Mirror Control ECU Assembly LH | U0142 | - | |
Outer Mirror Control ECU Assembly RH | U0142 | - | |
Front Power Seat Switch LH | - | - | |
Front Power Seat Switch RH | - | - | |
Rear Television Camera Assembly | U0100 | - | |
U0126 | - | ||
U0129 | - | ||
U0140 | - | ||
U0163 | - | ||
U1110 | - | ||
Multiplex Tilt and Telescopic ECU | U0142 | - | |
U0208 | - | ||
Sub Bus 11 | Blind Spot Monitor Sensor LH | U0100 | ○ |
U0126 | ○ | ||
U0129 | ○ | ||
U0142 | ○ | ||
U0293 | ○ | ||
Driving Support ECU Assembly | U0125 | ○ | |
U0126 | ○ | ||
U0129 | ○ | ||
U0142 | ○ | ||
U0293 | ○ | ||
U1100 | ○ | ||
Power Management Control ECU (HV CPU) |
- | - | |
Power Management Control ECU (Power Management CPU) |
- | - | |
Power Management Control ECU (Gateway Function) |
U0104 | ○ | |
U0233 | ○ | ||
U1002 | ○ | ||
U1100 | ○ | ||
Sub Bus 11 | Seat Belt Control ECU | U0129 | ○ |
U0140 | ○ | ||
U0151 | ○ | ||
U1104 | ○ |
○: DTC is output.
-: DTC is not output.
CAN BUS WAVEFORMS
This waveform is measured between terminals CANH and GND, and terminals CANL and GND of the DLC3. (Use this as a reference for diagnosis of CAN communication lines.)
When malfunctions in multiple ECUs are suspected based on the CAN bus check and DTCs checked using the GTS, check the resistance of the CAN bus using an ohmmeter first (Click here). If no problems are found, check the following waveforms.
If a waveform is not similar to one of the following 3 patterns (Group 1), then an open in a CAN main bus line, an open in a CAN branch line, or a short between a CAN line (CANH or CANL) and ground is suspected (Group 2).
Wiggle the connector and wire harness to check if the waveform changes.
CAN bus waveforms (Group 1)
*a | 1 V/DIV. |
*b | 50 μs./DIV. |
Normal waveform
*a | 1 V/DIV. |
*b | 50 μs./DIV. |
Open in both of the lines (CANH and CANL) of a CAN branch
Waveforms (waveforms shown using dotted lines) are not present from an ECU or sensor connected to a CAN branch with an open circuit in both lines. (Waveforms from other ECUs or sensors are normal.)
Because this waveform is similar to a normal waveform, instead of using the waveform, the malfunctioning part can be narrowed down by performing a CAN bus check.
*a | 1 V/DIV. |
*b | 50 μs./DIV. |
Short between the CAN bus lines (CANH and CANL)
Waveforms disappear.
If the malfunction is in an ECU, disconnecting the ECU will change the waveform. If the waveform does not change, a malfunction in the wire harness is suspected.
CAN bus waveforms (reference) (Group 2)
The following CAN bus waveforms can be used only as reference. The actual measured waveform may differ significantly depending on the location of the open or short circuit.
*a | 1 V/DIV. |
*b | 50 μs./DIV. |
Open in a CAN branch line (CANH)
An abnormal waveform is output from an ECU with an open in one of its CAN branch lines. Because this abnormal output interferes with the signals from other ECUs, the output of other ECUs will also appear abnormal.
Narrow down the malfunctioning part by checking DTCs or performing a CAN bus check, or by checking waveform changes when ECUs or sensors are disconnected. The waveform will change to one for an open in both sides of a CAN branch when the ECU or sensor with an open CAN branch line is disconnected.
*a | 1 V/DIV. |
*b | 50 μs./DIV. |
Open in a CAN branch line (CANL)
An abnormal waveform is output from an ECU with an open in one of its CAN branch lines. Because this abnormal output interferes with the signals from other ECUs, the output of other ECUs will also appear abnormal.
Narrow down the malfunctioning part by checking DTCs or performing a CAN bus check, or by checking waveform changes when ECUs or sensors are disconnected. The waveform will change to one for an open in both sides of a CAN branch when the ECU or sensor with an open CAN branch line is disconnected.
*a | 1 V/DIV. |
*b | 50 μs./DIV. |
Open in a CAN main bus line (CANH)
Waveforms of ECUs or sensors that are closer to the DLC3 than the open part are almost normal.
Waveforms of ECUs or sensors that are on the opposite side of the DLC3 from the open part are abnormal.
An open in a CAN main bus line can be confirmed by measuring the resistance between the CANH and CANL terminals of any CAN branch.
*a | 1 V/DIV. |
*b | 50 μs./DIV. |
Short between a CAN bus line (CANH) and ground
Narrow down the shorted part by checking for waveform changes when disconnecting connectors from the CAN junction connectors or when disconnecting ECUs or sensors.
A short to ground in the CANH line can be confirmed by measuring the resistance between CANH and ground using an ohmmeter.
*a | 1 V/DIV. |
*b | 50 μs./DIV. |
Short between a CAN bus line (CANL) and ground
Narrow down the shorted part by checking for waveform changes when disconnecting connectors from the CAN junction connectors or when disconnecting ECUs or sensors.
A short to ground in the CANL line can be confirmed by measuring the resistance between CANL and ground using an ohmmeter.
DATA SENDING/RECEIVING TABLE
Data sending/receiving table
If Data List items related to sent/received data are not displayed properly, the part for which communication is interrupted can be determined using the table below.
Data content | Data Detected and Sent by | Data Received by (Can be Checked in the Data List) |
Data Received by (Cannot be Checked in the Data List) |
Relevant Data List Item [Selected System] |
---|---|---|---|---|
Accelerator position | Power management control ECU (HV CPU) | - |
|
|
Engine speed | ECM |
|
|
|
Engine coolant temperature | ECM |
|
- |
|
Vehicle speed | Brake booster with master cylinder assembly (skid control ECU) |
|
|
|
Combination meter assembly*3 |
|
|
|
|
Wheel speed | Brake booster with master cylinder assembly (skid control ECU) | Driving support ECU assembly |
|
|
Shift position | Power management control ECU (HV CPU) |
|
|
|
Ambient temperature | Air conditioning amplifier assembly |
|
|
|
Driver door courtesy switch | Main body ECU (multiplex network body ECU) | - |
|
FL Door Courtesy SW [Main Body] |
Tire pressure warning ECU and receiver information | Main body ECU (multiplex network body ECU) | - | Combination meter assembly | - |
Steering angle sensor | Steering sensor |
|
|
|
Yaw rate sensor | Airbag sensor assembly |
|
|
|
Deceleration sensor | Airbag sensor assembly |
|
|
|
Side turn signal | Combination meter assembly |
|
Driving support ECU assembly |
|
Power switch condition | Main body ECU (multiplex network body ECU) |
|
|
|
Driver side buckle switch signal | Airbag sensor assembly | Seat belt control ECU | Main body ECU (multiplex network body ECU) |
|
Main body ECU (multiplex network body ECU)*4 | - | Combination meter assembly | - | |
Passenger side buckle switch signal | Seat belt control ECU | Combination meter assembly | - |
|
Ultrasonic sensor information | Clearance warning ECU assembly | - |
|
|
Power management control ECU (HV CPU) power source voltage*1 | Power management control ECU (HV CPU) | - | - | +B [Hybrid Control] |
Power management control ECU (power management CPU) power source state*1 | Power management control ECU (power management CPU) | - | - | Power Supply Condition [Power Source Control] |
ECM power source voltage*1 | ECM | - | - | Battery Voltage [Engine and ECT] |
Brake pedal stroke sensor*1 | Brake booster with master cylinder assembly (skid control ECU) | - | - |
|
Power steering ECU with motor assembly power source voltage*1 | Power steering ECU with motor assembly | - | - | IG Power Supply [EMPS] |
Intensity of light received by the solar sensor*1 | Air conditioning amplifier assembly | - | - |
|
Combination meter assembly power source voltage*1 | Combination meter assembly | - | - | +B Voltage Value [Combination Meter] |
Clearance sonar main switch condition*1 | Clearance warning ECU assembly | - | - | Main Switch [Clearance Sonar] |
Multi-media module receiver assembly power source voltage*1 | Multi-media module receiver assembly | - | - | Battery Voltage [Navigation System] |
Radio receiver assembly power source voltage*1 | Radio receiver assembly | - | - | Battery Voltage [Navigation System] |
Driver door touch sensor*1 | Certification ECU (smart key ECU assembly) | - | - | D-Door Touch Sensor [Entry&Start] |
Front power seat switch LH power source voltage*1 | Front power seat switch LH | - | - |
|
Front power seat switch RH power source voltage*1 | Front power seat switch RH | - | - |
|
Outer mirror control ECU assembly LH power source voltage*1 | Outer mirror control ECU assembly LH | - | - | +B Voltage Input Value [Mirror L] |
Outer mirror control ECU assembly RH power source voltage*1 | Outer mirror control ECU assembly RH | - | - | +B Voltage Input Value [Mirror R] |
Tilt and telescopic manual switch condition*1 | Multiplex tilt and telescopic ECU | - | - |
|
Blind spot monitor sensor LH power supply voltage*1 | Blind spot monitor sensor LH | - | - | Power Supply Voltage [Blind spot monitor Master] |
Cruise control main switch condition*1 |
|
- | - |
|
Wiper operation status*1 | Driving support ECU assembly | - | - |
|
Driver seat position*1 | Airbag sensor assembly | - | - | Driver Seat Position [SRS Airbag] |
Door control switch condition*1 | Luggage closer motor assembly | - | - | PBD Close SW [Back Door] |
Headlight dimmer switch condition*1 |
|
- | - |
|
*1: Whether the ECU that sends data is functioning or not can be judged by using the GTS to check items such as switches or sensors that send signals to the ECU via direct lines.
*2: Although the received contents cannot be checked in the Data List, whether or not the data is received normally can be checked by observing the combination meter assembly.
*3: The combination meter assembly receives a vehicle speed signal from the brake booster with master cylinder assembly (skid control ECU) and sends the signal to other ECUs.
*4: The main body ECU (multiplex network body ECU) receives a driver seat buckle switch signal from the airbag sensor assembly and sends the signal to other ECUs.
*5: w/o Dynamic Radar Cruise Control System
*6: w/ Dynamic Radar Cruise Control System
Details of relevant Data List items (Selected system: Hybrid Control)
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Powertrain / Hybrid Control / Data List.
According to the display on the GTS, read the Data List.
Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
---|---|---|---|
Engine Revolution | Engine speed/ Min.: 0 rpm, Max.: 16383 rpm |
While idling after the engine is warmed up and inspection mode: Approximately 900 rpm While driving at a constant speed: No significant fluctuation |
- |
Vehicle Spd | Vehicle speed/ Min.: 0 km/h (0 mph), Max.: 255 km/h (158 mph) |
Vehicle stopped: 0 km/h (0 mph) While driving at a constant speed: No significant fluctuation |
- |
+B | Auxiliary battery voltage/ Min.: 0.00 V, Max.: 65.53 V |
Constant: 10.00 to 15.00 V |
Auxiliary battery condition |
Accel Pedal Pos #1 | Accelerator pedal position sensor No. 1/ Min.: 0.0%, Max.: 100.0% |
Accelerator pedal depressed: Changes with accelerator pedal pressure |
Accelerator pedal sensor assembly |
Accel Pedal Pos #2 | Accelerator pedal position sensor No. 2/ Min.: 0.0%, Max.: 100.0% |
Accelerator pedal depressed: Changes with accelerator pedal pressure |
Accelerator pedal sensor assembly |
Ambient Temperature | Ambient air temperature/ Min.: -40°C (-40°F), Max.: 215°C (419°F) |
Power switch on (IG): Same as ambient air temperature |
Ambient temperature sensor |
Ready Signal | Power switch condition/ ON or OFF |
Power switch on (READY): ON |
- |
Shift Sensor Shift Pos | Shift position/ P/R/N/D/B |
Shift lever in P: P Shift lever in R: R Shift lever in N: N Shift lever in D: D Shift lever in S: B |
Shift lever position sensor |
Shift Sensor SW - P | Shift lever position sensor/ ON or OFF |
Shift lever in P: ON Shift lever in any position except P: OFF |
Shift lever position sensor |
Shift Sensor SW - R | Shift lever position sensor/ ON or OFF |
Shift lever in R: ON Shift lever in any position except R: OFF |
Shift lever position sensor |
Shift Sensor SW - N | Shift lever position sensor/ ON or OFF |
Shift lever in N: ON Shift lever in any position except N: OFF |
Shift lever position sensor |
Shift Sensor SW - D | Shift lever position sensor/ ON or OFF |
Shift lever in D or S: ON Shift lever in any position except D or S: OFF |
Shift lever position sensor |
Shift Sensor SW - FD | Shift lever position sensor/ ON or OFF |
Shift lever in D or S: ON Shift lever in any position except D or S: OFF |
Shift lever position sensor |
Shift Sensor SW - RV | Shift lever position sensor/ ON or OFF |
Shift lever in R: ON Shift lever in any position except R: OFF |
Shift lever position sensor |
Shift Sensor SW - MJ | Shift lever position sensor/ ON or OFF |
Shift lever in P, R, N, D or S: ON Shift lever in any position except P, R, N, D or S: OFF |
Shift lever position sensor |
Details of relevant Data List items (Selected system: Power Source Control)
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Power Source Control / Data List.
According to the display on the GTS, read the Data List.
Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
---|---|---|---|
Shift P Signal | Shift position P/ON or OFF | ON: Shift lever in P OFF: Shift lever not in P |
|
Ready Signal | Ready signal/ON or OFF | ON: Hybrid control system on (on (READY)) OFF: Hybrid control system off |
- |
Vehicle Speed Signal | Vehicle being driven or stopped/Stop or Run | Stop: Vehicle stopped Run: Vehicle being driven at 5 km/h (3 mph) or more |
- |
Power Supply Condition | Power supply state/IG2 ON, ST ON, All OFF, IG1 ON or ACC ON | All OFF: Power switch off (ACC and IG) ACC ON: Power switch on (ACC) IG1 ON: Power switch on (IG) (IG1 relay on) IG2 ON: Power switch on (IG) (IG2 relay on) ST ON: Sending hybrid control system start request signal |
Since the IG1 and IG2 relays turn on at approximately the same time, IG1 ON may not be displayed (the IG1 relay turns on for a very short time). |
Details of relevant Data List items (Selected system: Cruise Control)
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Powertrain / Cruise Control / Data List.
According to the display on the GTS, read the Data List.
Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
---|---|---|---|
CCS Vehicle Spd | Vehicle speed/min.: 0 km/h (0 mph), max.: 255 km/h (159 mph) | Actual vehicle speed is displayed | - |
CCS Mem Vehicle Spd | Stored vehicle speed/min.: 0 km/h (0 mph), max.: 255 km/h (159 mph) | Actual vehicle speed stored in memory | - |
Main SW M-CPU | Cruise control switch (Main-CPU) / ON or OFF | ON: Cruise control switch (ON-OFF button) pushed OFF: Cruise control switch (ON-OFF button) released |
- |
Cruise Operation Status | Shift position signal (D position) / ON or OFF | ON: Shift lever in D OFF: Shift lever not in D |
- |
Details of relevant Data List items (Selected system: Engine and ECT)
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Normal Condition: If no conditions are specifically stated for "idling", the shift lever should be in N or P, the A/C switch should be off and all accessory switches should be off.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Put the engine in inspection mode (maintenance mode) (Click here).
Warm up the engine.
Turn the A/C switch off.
Turn the power switch off.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Powertrain / Engine and ECT / Data List.
According to the display on the GTS, read the Data List.
Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
---|---|---|---|
Engine Speed | Engine speed/ Min.: 0 rpm, Max.: 16383 rpm |
900 to 1050 rpm: Idling | When the crankshaft position sensor is malfunctioning, "Engine Speed" is approximately 0 rpm or varies greatly from the actual engine speed. |
Coolant Temp | Coolant temperature/ Min.: -40°C (-40°F), Max.: 140°C (284°F) |
75 to 100°C (167 to 212°F): After warming up | This is the engine coolant temperature.
Tip:
|
Battery Voltage | Auxiliary battery voltage/ Min.: 0 V, Max.: 65.535 V |
11 to 16 V: Power switch on (IG) | If 11 V or less, characteristics of some electrical components may change. |
Engine Speed (Starter Off) | Engine speed after starting the engine/ Min.: 0 rpm, Max.: 51199 rpm |
- | This is the engine speed immediately after starting the engine. |
Ambient Temp for A/C | Ambient temperature for A/C/ Min.: -40°C (-40°F), Max.: 215°C (419°F) |
- | - |
Details of relevant Data List items (Selected system: ABS/VSC/TRC)
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Warm up the engine.
Turn the power switch off.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Chassis / ABS/VSC/TRC / Data List.
According to the display on the GTS, read the Data List.
Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
---|---|---|---|
Stroke Sensor | Brake pedal stroke sensor assembly / Min.: 0.00 V, Max.: 5.00 V | When brake pedal released: 0.65 to 1.35 V | Reading increases when brake pedal is depressed |
Stroke Sensor2 | Brake pedal stroke sensor assembly 2 / Min.: 0.00 V, Max.: 5.00 V | When brake pedal released: 3.65 to 4.35 V | Reading decreases when brake pedal is depressed |
Deceleration Sensor | Acceleration sensor 1 / Min.: -18.525 m/s2, Max.: 18.387 m/s2 |
- | During deceleration/acceleration: Changes continuously |
Deceleration Sensor2 | Acceleration sensor 2 / Min.: -18.525 m/s2, Max.: 18.387 m/s2 |
- | During deceleration/acceleration: Changes continuously |
Yaw Rate Sensor | Yaw rate sensor 1 / Min.: -128 degrees/s, Max.: 127 degrees/s | Vehicle stationary: 0 degrees/s Turning right: -128 to 0 degrees/s Turning left: 0 to 127 degrees/s |
- |
Yaw Rate Sensor2 | Yaw rate sensor 2 / Min.: -128 degrees/s, Max.: 127 degrees/s | Vehicle stationary: 0 degrees/s Turning right: -128 to 0 degrees/s Turning left: 0 to 127 degrees/s |
- |
Steering Angle Sensor | Steering angle sensor / Min.: -3276.8 degrees, Max.: 3276.7 degrees | Turning left: Increases Turning right: Decreases |
- |
FR Wheel Speed | Front speed sensor RH / Min.: 0 km/h (0 mph), Max.: 326 km/h (202 mph) | Vehicle stopped: 0 km/h (0 mph) | When driving at constant speed: No large fluctuations |
FL Wheel Speed | Front speed sensor LH / Min.: 0 km/h (0 mph), Max.: 326 km/h (202 mph) | Vehicle stopped: 0 km/h (0 mph) | When driving at constant speed: No large fluctuations |
RR Wheel Speed | Rear speed sensor RH / Min.: 0 km/h (0 mph), Max.: 326 km/h (202 mph) | Vehicle stopped: 0 km/h (0 mph) | When driving at constant speed: No large fluctuations |
RL Wheel Speed | Rear speed sensor LH / Min.: 0 km/h (0 mph), Max.: 326 km/h (202 mph) | Vehicle stopped: 0 km/h (0 mph) | When driving at constant speed: No large fluctuations |
Vehicle Speed | Maximum wheel speed sensor / Min.: 0 km/h (0 mph), Max.: 326 km/h (202 mph) | Vehicle stopped: 0 km/h (0 mph) | When driving at constant speed: No large fluctuations |
Details of relevant Data List items (Selected system: EMPS)
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Turn the power switch off.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Chassis / EMPS / Data List.
According to the display on the GTS, read the Data List.
Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
---|---|---|---|
Meter Vehicle Velocity | Vehicle speed from speedometer/ Min.: 0.0 km/h (0.0 MPH) Max.: 300.0 km/h (186.4 MPH) |
0 km/h (0 MPH) | Power switch on (READY) and vehicle stopped |
No significant fluctuation | Power switch on (READY) and vehicle driven at a constant speed | ||
Steering Angle Velocity | Steering angle speed/ Min.: -32768 deg/s Max.: 32767 deg/s |
Value changes in proportion to steering speed - The value increases when turning left and decreases when turning right |
Power switch on (READY) and steering wheel being turned |
IG Power Supply | IG power source voltage/ Min.: 0.0000 V Max.: 20.1531 V |
8 to 16 V | Power switch on (IG) |
Steering Angle Sens Sig | Steering angle sensor signal state/ OK or NG(1) or NG(2) or NG(3) | OK: Steering angle sensor signal received NG(1): The learning has not completed NG(2): Steering Sensor Abnormal NG(3): Communication Error |
- |
Details of relevant Data List items (Selected system: Air Conditioner)
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Air Conditioner / Data List.
According to the display on the GTS, read the Data List.
Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
---|---|---|---|
Ambient Temp Sensor | Ambient temperature sensor (thermistor assembly) / Min.: -23.30°C (-9.94°F) Max.: 65.95°C (150.71°F) |
Actual ambient temperature displayed | - |
Solar Sensor (D Side) | Driver side solar sensor (automatic light control sensor) / Min.: 0 Max.: 255 |
Driver side solar sensor (automatic light control sensor) value increases as brightness increases | - |
Solar Sensor (P Side) | Front passenger side solar sensor (automatic light control sensor) / Min.: 0 Max.: 255 |
Front passenger side solar sensor (automatic light control sensor) value increases as brightness increases | - |
Engine Coolant Temp | Engine coolant temperature sensor / Min.: 1.30°C (34.34°F) Max.: 90.55°C (194.99°F) |
Actual engine coolant temperature displayed | - |
Details of relevant Data List items (Selected system: Combination Meter)
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Warm up the engine.
Turn the power switch off.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Combination Meter / Data List.
According to the display on the GTS, read the Data List.
Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
---|---|---|---|
P-Seatbelt Buckle SW | Front passenger seat belt buckle switch/OFF or ON | OFF: Front passenger seat belt fastened (warning light off) | - |
ON: Front passenger seat belt unfastened (warning light on) | |||
Vehicle Speed Meter | Vehicle speed/Min.: 0 km/h (0 mph), Max.: 255 km/h (158 mph) | Almost the same as actual vehicle speed | - |
Engine Rpm | Engine speed/Min.: 0 rpm, Max.: 12750 rpm | Approximately 900 rpm: Idling | - |
Coolant Temperature | Engine coolant temperature/0 to 127.5°C (0 to 261.5°F) | After warming up: 75 to 100°C (167 to 212°F) | - |
+B Voltage Value | Auxiliary battery voltage/Min.: 0 V, Max.: 25.5 V | 11 to 14 V | - |
Ambient Temperature | Outside temperature/Min.: -40°C (-40°F), Max.: 87.5°C (189.5°F) | Almost the same as actual outside temperature | The temperature displayed on the multi-information display is -40 to 50°C (-40 to 122°F) |
Turn Signal Switch (Right) | RH turn signal switch/OFF or ON | OFF: RH turn switch off | - |
ON: RH turn switch on | |||
Turn Signal Switch (Left) | LH turn signal switch/OFF or ON | OFF: LH turn switch off | - |
ON: LH turn switch on |
Details of relevant Data List items (Selected system: Clearance Sonar)
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Clearance Sonar / Data List.
According to the display on the GTS, read the Data List.
Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
---|---|---|---|
Main Switch | Clearance sonar main switch/OFF or ON | OFF: Clearance sonar main switch off ON: Clearance sonar main switch on |
- |
Fr Left Sensor | Front left sensor information/Undetect, Close R, Mid Y, Mid L Y, Freeze, Open or Blink | Undetect: Not detected Close R: Detected (Close-range) [Red] Mid Y: Detected (Medium-range) [Yellow] Mid L Y: Detected (Long-range) [Yellow] Freeze: Sensor frozen Open: Open in sensor Blink: All displays blinking |
- |
Fr Left Center Sensor | Front left center sensor information/Undetect, Close R, Mid Y, Mid L Y, Freeze, Open or Blink | Undetect: Not detected Close R: Detected (Close-range) [Red] Mid Y: Detected (Medium-range) [Yellow] Mid L Y: Detected (Long-range) [Yellow] Long Y: Detected (Longest-range) [Yellow] Freeze: Sensor frozen Open: Open in sensor Blink: All displays blinking |
- |
Fr Right Center Sensor | Front right center sensor information/Undetect, Close R, Mid Y, Mid L Y, Freeze, Open or Blink | Undetect: Not detected Close R: Detected (Close-range) [Red] Mid Y: Detected (Medium-range) [Yellow] Mid L Y: Detected (Long-range) [Yellow] Long Y: Detected (Longest-range) [Yellow] Freeze: Sensor frozen Open: Open in sensor Blink: All displays blinking |
- |
Fr Right Sensor | Front right sensor information/Undetect, Close R, Mid Y, Mid L Y, Freeze, Open or Blink | Undetect: Not detected Close R: Detected (Close-range) [Red] Mid Y: Detected (Medium-range) [Yellow] Mid L Y: Detected (Long-range) [Yellow] Freeze: Sensor frozen Open: Open in sensor Blink: All displays blinking |
- |
Rr Left Sensor | Rear left sensor information/Undetect, Close R, Mid Y, Mid L Y, Freeze, Open or Blink | Undetect: Not detected Close R: Detected (Close-range) [Red] Mid Y: Detected (Medium-range) [Yellow] Mid L Y: Detected (Long-range) [Yellow] Freeze: Sensor frozen Open: Open in sensor Blink: All displays blinking |
- |
Rr Left Center Sensor | Rear left center sensor information/Undetect, Close R, Mid Y, Mid L Y, Long Y, Freeze, Open or Blink | Undetect: Not detected Close R: Detected (Close-range) [Red] Mid Y: Detected (Medium-range) [Yellow] Mid L Y: Detected (Long-range) [Yellow] Long Y: Detected (Longest-range) [Yellow] Freeze: Sensor frozen Open: Open in sensor Blink: All displays blinking |
- |
Rr Right Center Sensor | Rear right center sensor information/Undetect, Close R, Mid Y, Mid L Y, Long Y, Freeze, Open or Blink | Undetect: Not detected Close R: Detected (Close-range) [Red] Mid Y: Detected (Medium-range) [Yellow] Mid L Y: Detected (Long-range) [Yellow] Long Y: Detected (Longest-range) [Yellow] Freeze: Sensor frozen Open: Open in sensor Blink: All displays blinking |
- |
Rr Right Sensor | Rear right sensor information/Undetect, Close R, Mid Y, Mid L Y, Freeze, Open or Blink | Undetect: Not detected Close R: Detected (Close-range) [Red] Mid Y: Detected (Medium-range) [Yellow] Mid L Y: Detected (Long-range) [Yellow] Freeze: Sensor frozen Open: Open in sensor Blink: All displays blinking |
- |
Parking Signal | Parking signal/OFF or ON | OFF: Shift lever in any position except P ON: Shift lever in P |
- |
Reverse Signal | Reverse signal/OFF or ON | OFF: Shift lever in any position except R ON: Shift lever in R |
- |
Vehicle Speed Info | Vehicle speed signal/Snr Stop or Snr Work | Snr Stop: Vehicle speed 15 km/h (9.3 mph) or more (when accelerating) or 10 km/h (6.2 mph) or more (when decelerating) Snr Work: Vehicle speed less than 15 km/h (9.3 mph) (when accelerating) or less than 10 km/h (6.2 mph) (when decelerating) |
- |
Details of relevant Data List items (Selected system: SRS Airbag)
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Turn the power switch off.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / SRS Airbag / Data List.
According to the display on the GTS, read the Data List.
Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
---|---|---|---|
Driver Seat Position | Driver Seat Position/ Forward: Seat position is forward Bkward: Seat position is backward Fail: Failure detected |
Forward/Bkward | - |
Left side Buckle SW | LH Side Buckle SW/ Unset: Seat belt is not fastened Set: Seat belt is fastened NG: Data is not determined |
Unset/Set | for LHD |
Right side Buckle SW | RH Side Buckle SW/ Unset: Seat belt is not fastened Set: Seat belt is fastened NG: Data is not determined |
Unset/Set | for RHD |
Details of relevant Data List items (Selected system: Navigation System)
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Navigation System / Data List.
According to the display on the GTS, read the Data List.
Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
---|---|---|---|
Battery Voltage | Auxiliary battery voltage/ Min.: 0 V, Max.:24 V | 11 to 14 V | - |
Reverse Signal | Reverse signal/ON or OFF | ON: Shift lever in R OFF: Shift lever in any position other than R |
- |
Vehicle Speed | Maximum wheel speed sensor reading/Min.: 0 km/h (0 mph), Max.: 255 km/h (158 mph) | Vehicle stopped: 0 km/h (0 mph) | When driving at constant speed: No large fluctuations |
Details of relevant Data List items (Selected system: Entry&Start)
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Entry&Start / Data List.
According to the display on the GTS, read the Data List.
Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
---|---|---|---|
D-Door Touch Sensor | Driver door touch sensor (unlock sensor) / ON or OFF | ON: Driver door touch sensor (unlock sensor) touched OFF: Driver door touch sensor (unlock sensor) not touched |
|
Ignition Switch | Power switch on (IG) / ON or OFF | ON: Power switch on (IG) OFF: Power switch off |
|
Details of relevant Data List items (Selected system: Main Body)
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Data List.
According to the display on the GTS, read the Data List.
Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
---|---|---|---|
ACC SW | Power switch status / ON or OFF | ON: Power switch on (ACC) OFF: Power switch off |
- |
IG SW | Power switch status / ON or OFF | ON: Power switch on (IG) OFF: Power switch off |
- |
FL Door Courtesy SW | Front door courtesy light switch assembly LH signal / ON or OFF | ON: Front door LH open OFF: Front door LH closed |
- |
Dimmer SW | Dimmer switch high position signal/ON or OFF | ON: Dimmer switch in high or high flash position OFF: Dimmer switch in low position |
- |
Details of relevant Data List items (Selected system: Driver Seat)
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Driver Seat / Data List.
According to the display on the GTS, read the Data List.
Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
---|---|---|---|
Ignition Switch | Communication state of power switch signal / ON or OFF | ON: Power switch on (IG) signal received OFF: Power switch off signal not received |
- |
Vehicle Speed | Vehicle speed data / min.: 0 km/h (0 mph), max.: 255 km/h (158 mph) | Actual vehicle speed | - |
Power Voltage | Power supply for front power seat switch LH / min: 0.95 V, max: 20.84 V | Within range from 11 V to 14 V | - |
Shift P sw (PMN) | Park state signal / ON or OFF | ON: Shift lever in P OFF: Shift lever in a position other than P |
- |
Details of relevant Data List items (Selected system: Passenger Seat)
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Passenger Seat / Data List.
According to the display on the GTS, read the Data List.
Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
---|---|---|---|
Ignition Switch | Communication state of power switch signal / ON or OFF | ON: Power switch on (IG) signal received OFF: Power switch off signal not received |
- |
Vehicle Speed | Vehicle speed data / min.: 0 km/h (0 mph), max.: 255 km/h (158 mph) | Actual vehicle speed | - |
Power Voltage | Power supply for front power seat switch RH / min: 0.95 V, max: 20.84 V | Within range from 11 V to 14 V | - |
Shift P sw (PMN) | Park state signal / ON or OFF | ON: Shift lever in P OFF: Shift lever in a position other than P |
- |
Details of relevant Data List items (Selected system: Mirror L)
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Mirror L / Data List.
According to the display on the GTS, read the Data List.
Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
---|---|---|---|
+B Voltage Input Value | Power supply for outer mirror control ECU assembly/MIN: 0 V, MAX: 19.98 V | Within range from 11 to 14 V | - |
Details of relevant Data List items (Selected system: Mirror R)
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Mirror R / Data List.
According to the display on the GTS, read the Data List.
Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
---|---|---|---|
+B Voltage Input Value | Power supply for outer mirror control ECU assembly/MIN: 0 V, MAX: 19.98 V | Within range from 11 to 14 V | - |
Details of relevant Data List items (Selected system: Tilt & Telescopic)
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Turn the power switch off.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Tilt & Telescopic / Data List.
According to the display on the GTS, read the Data List.
Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
---|---|---|---|
Tilt Up Switch | Input state of tilt up switch/ ON or OFF |
ON: Tilt up switch activated OFF: Tilt up switch not activated |
- |
Tilt Down Switch | Input state of tilt down switch/ ON or OFF |
ON: Tilt down switch activated OFF: Tilt down switch not activated |
- |
Telesco Short Switch | Input state of telescopic contract switch/ ON or OFF |
ON: Telescopic contract switch activated OFF: Telescopic contract switch not activated |
- |
Telesco Long Switch | Input state of telescopic extend switch/ ON or OFF |
ON: Telescopic extend switch activated OFF: Telescopic extend switch not activated |
- |
Freeze Speed Info | Vehicle speed data/ Min.: 0 km/h (0 mph) Max.: 255 km/h (158 mph) |
Stop → Drive → Stop | 0 km/h (0 mph) → Same speed as indicated on speedometer → 0 km/h (0 mph) |
IG Switch (CAN) | Communication state of power switch/ ON or OFF |
ON: Communication normal OFF: Communication interrupted |
- |
Details of relevant Data List items (Selected system: Back Door)
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Back Door / Data List.
According to the display on the GTS, read the Data List.
Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
---|---|---|---|
PBD Close SW | Door control switch signal / ON or OFF | ON: Door control switch is on OFF: Door control switch is off |
When this item is abnormal, there is a problem with the door control switch or related parts. |
IG SW | Power switch on (IG) / ON or OFF | ON: Power switch on (IG) OFF: Power switch off |
"OFF" is also displayed for this item when the power switch is on (ACC). |
Details of relevant Data List items (Selected system: Blind Spot Monitor Master)
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Blind spot monitor Master / Data List.
According to the display on the GTS, read the Data List.
Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
---|---|---|---|
Turn Switch State | State of the headlight dimmer switch assembly (turn signal light switch) / Left ON, Right ON or OFF | Left ON: Left side of turn signal light switch on Right ON: Right side of turn signal light switch on OFF: Turn signal light switch off |
- |
Reverse | State of the shift position R signal / OFF or ON | ON: Shift lever in R OFF: Shift lever in any position except R |
- |
Vehicle Speed | Vehicle speed signal / Min.: 0 km/h (0 mph), Max.: 326 km/h (203 mph) | Vehicle stopped: 0 km/h (0 mph) | - |
Steering Angle | Steering angle sensor / Min.: -3072°, Max.: 3070.5° | Left turn: Increases Right turn: Decreases |
- |
Power Supply Voltage | Power supply voltage / Min.: 0 V, Max.: 50 V | Always: 11 to 14 V | - |
Details of relevant Data List items (Selected system: Radar Cruise)
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Powertrain / Radar Cruise / Data List.
According to the display on the GTS, read the "Data List".
Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
---|---|---|---|
Cruise Control Main Switch | Cruise control switch signal / ON or OFF | ON: Cruise control switch (ON-OFF button) pushed OFF: Cruise control switch (ON-OFF button) released |
- |
Wiper (Hi) | Windshield wiper switch Hi signal / ON or OFF | ON: Windshield wiper switch Hi position OFF: Windshield wiper switch except Hi position |
- |
Wiper (Lo) | Windshield wiper switch Lo signal / ON or OFF | ON: Windshield wiper switch Lo position OFF: Windshield wiper switch except Lo position |
- |
Vhcl Spd-Brake ECU | Vehicle speed / min.: -327 km/h (-203 mph), max.: 327 km/h (203 mph) | Actual vehicle speed | - |
Rear Whl Spd LH Sensor | Rear speed sensor LH signal / Normal or Abnoml | Normal: Rear speed sensor LH is normal Abnoml: Rear speed sensor LH is abnormal |
- |
Rear Whl Spd RH Sensor | Rear speed sensor RH signal / Normal or Abnoml | Normal: Rear speed sensor RH is normal Abnoml: Rear speed sensor RH is abnormal |
- |
Front Whl Spd LH Sensor | Front speed sensor LH signal / Normal or Abnoml | Normal: Front speed sensor LH is normal Abnoml: Front speed sensor LH is abnormal |
- |
Front Whl Spd RH Sensor | Front speed sensor RH signal / Normal or Abnoml | Normal: Front speed sensor RH is normal Abnoml: Front speed sensor RH is abnormal |
- |
Yaw Rate Sensor | Yaw rate value / min.: -100 deg/s, max.: 100 deg/s | Actual yaw rate value | - |
Deceleration Sensor 1 | Deceleration value / min.: -14.7 m/s2, max.: 14.7 m/s2 | Actual deceleration value | - |
Deceleration Sensor 2 | Deceleration value / min.: -14.7 m/s2, max.: 14.7 m/s2 | Actual deceleration value | - |
Steering Angle | Steering angle / min.: -3072 deg, max.: 3070.5 deg | Actual steering angle | - |
Details of relevant Data List items (Selected system: Pre-Crash)
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Pre-Crash / Data List.
According to the display on the GTS, read the Data List.
Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
---|---|---|---|
Driver Buckle SW | Buckle switch status of driver seat/ UNKNOWN, UNSET, SET or ERROR |
UNKNOWN: Indeterminate data UNSET: Driver seat belt unfastened SET: Driver seat belt fastened ERROR: Buckle switch malfunction |
- |
Passenger Buckle SW | Buckle switch status of passenger seat/ UNKNOWN, UNSET, SET or ERROR |
UNKNOWN: Indeterminate data UNSET: Passenger seat belt unfastened SET: Passenger seat belt fastened ERROR: Buckle switch malfunction |
- |
Details of relevant Data List items (Selected system: Pre-Crash 2)
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Pre-Crash 2 / Data List.
According to the display on the GTS, read the Data List.
Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
---|---|---|---|
Wiper Information | Wiper operational status/ Unoperat, Oil off, Mist, Washer, Unknown, Intermi, Lo or Hi |
The respective operational status displayed | Not Supported |
Details of relevant Data List items (Selected system: Lane Departure Alert)
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Chassis / Lane Departure Alert / Data List.
According to the display on the GTS, read the Data List.
Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
---|---|---|---|
Head Light (High Beam) | Status of the head Light (high beam) / OFF or ON | ON: Headlight dimmer switch HI OFF: Headlight dimmer switch except HI |
- |
Turn Signal Switch (Right) | Status of turn signal light switch (right) / OFF or ON | ON: Turn signal light switch right OFF: Turn signal light switch off |
- |
Turn Signal Switch (Left) | Status of turn signal light switch (left) / OFF or ON | ON: Turn signal light switch left OFF: Turn signal light switch off |
- |
Details of relevant Data List items (Selected system: Advanced Parking Guidance/Parking Assist Monitor)
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Turn the power switch off.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Chassis / Advanced Parking Guidance/Parking Assist Monitor / Data List.
According to the display on the GTS, read the "Data List".
Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
---|---|---|---|
Wheel Speed Sensor (4wheel) | Vehicle speed signal from speed sensor/OK or NG | OK: Speed signal normal NG: Speed signal abnormal |
- |