PTC HEATER ASSEMBLY INSTALLATION

PROCEDURE

1. INSTALL QUICK HEATER ASSEMBLY

   
   

   1. 

      Install in this Direction

      Engage the guide to install the quick heater assembly as shown in the illustration.

   2. Connect each connector.

2. INSTALL NO. 2 HEATER COVER

   
   

   1. Engage the guide and claw.

   2. Install the No. 2 heater cover with the screw.

3. INSTALL NO. 1 AIR DUCT

   Click here

4. INSTALL FRONT NO. 1 CONSOLE BOX INSERT

   Click here

5. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

   Click here

6. INSTALL REAR CONSOLE BOX ASSEMBLY

   Click here

7. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

   Click here