Note
Before replacing the certification ECU (smart key ECU assembly), refer to the Service Bulletin.
When replacing the combination meter assembly, make sure to replace it with a new one.
Tech Tips
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
Inspect the fuses and relays related to this system before inspecting the suspected areas below.
| Symptom | Suspected Area | Link |
|---|---|---|
| Speedometer malfunction | Speedometer circuit | |
| Tachometer malfunction | Tachometer circuit | |
| Fuel receiver gauge malfunction | Fuel receiver gauge circuit |
| Symptom | Suspected Area | Link |
|---|---|---|
| Open door warning light does not come on | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Perform Active Test (Indicat. Lamp Doors All Open) | ||
| Combination meter assembly | ||
| Main body ECU (multiplex network body ECU) (for LHD) | ||
| Main body ECU (multiplex network body ECU) (for RHD) | ||
| Brake warning light does not come on | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (Indicat. Lamp Brake) | ||
| Anti-lock brake system (w/o VSC) | ||
| Vehicle stability control system (w/ VSC) | ||
| Brake master cylinder reservoir sub-assembly (brake fluid level warning switch) (for LHD) | ||
| Brake master cylinder reservoir sub-assembly (brake fluid level warning switch) (for RHD) | ||
| Harness or connector | - | |
| Combination meter assembly | ||
| Front seat belt warning light does not come on | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Perform Active Test (Driver Side Seat Belt) | ||
| Seat belt warning system (w/ Occupant Classification System) | ||
| Seat belt warning system (w/o Occupant Classification System) | ||
| Combination meter assembly | ||
| SRS warning light does not come on | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (Indicat. Lamp Airbag) | ||
| Airbag system (w/ Occupant Classification System) | ||
| Airbag system (w/o Occupant Classification System) | ||
| Combination meter assembly | ||
| Engine coolant temperature warning light does not come on | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (Indicat. Lamp Coolant Hot) | ||
| Combination meter assembly | ||
| ECM (2AR-FE) | ||
| ECM (3ZR-FE) | ||
| Charge warning light does not come on | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (Indicat. Lamp Charge) | ||
| Harness or connector | - | |
| Generator assembly (2AR-FE) | ||
| Generator assembly (3ZR-FE) | ||
| Combination meter assembly | ||
| ECM (2AR-FE) | ||
| ECM (3ZR-FE) | ||
| Engine oil pressure warning light does not come on | Check indicator/warning light | |
| Perform Active Test (Indicat. Oil Pressure) | ||
| Harness or connector | - | |
| Engine oil pressure switch assembly (2AR-FE) | ||
| Engine oil pressure switch assembly (3ZR-FE) | ||
| Combination meter assembly | ||
| A/T OIL TEMP warning light does not come on (except Manual Transaxle) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (A/T Oil Temperature Operation) | ||
| Automatic transaxle system (U760E) | ||
| Automatic transaxle system (U760F) | ||
| Continuously variable transaxle system (K111) | ||
| Continuously variable transaxle system (K111F) | ||
| Combination meter assembly | ||
| EPS warning light does not come on | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (Indicat. EPS) | ||
| Power steering system | ||
| Combination meter assembly | ||
| MIL does not come on | Check indicator/warning light | |
| Harness or connector | - | |
| SFI system (2AR-FE [w/ Canister Pump Module]) | ||
| SFI system (2AR-FE [w/o Canister Pump Module]) | ||
| SFI system (3ZR-FE) | ||
| Combination meter assembly | ||
| Slip indicator light does not come on (w/ VSC) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (Indicat. Lamp Slip) | ||
| Vehicle stability control system | ||
| Combination meter assembly | ||
| VSC OFF indicator light does not come on (w/ VSC) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (Indicat. VSC OFF) | ||
| Vehicle stability control system | ||
| Combination meter assembly | ||
| TRC OFF indicator light does not come on (w/ VSC, for 4WD/AWD, w/o Panic Switch) TRAC OFF indicator light does not come on (w/ Panic Switch) |
CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (VSC TRC Indicator) | ||
| Vehicle stability control system | ||
| Combination meter assembly | ||
| ABS warning light does not come on | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (Indicat. Lamp ABS) | ||
| Anti-lock brake system (w/o VSC) | ||
| Vehicle stability control system (w/ VSC) | ||
| Combination meter assembly | ||
| Tire pressure warning light does not come on (w/ Tire Pressure Warning System) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (Indicat. Tire Pressure Warning System) | ||
| Tire pressure warning system | ||
| Combination meter assembly | ||
| Fuel level warning light does not come on (Fuel receiver gauge operates normally) | Perform Active Test (Indicat. Lamp Fuel) | |
| Combination meter assembly | ||
| Rear fog indicator light does not come on (Rear fog light operates normally) (w/ Rear Fog Light) | Harness or connector | - |
| Combination meter assembly | ||
| 4WD/AWD warning light does not come on (for 4WD/AWD) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (4WD Warning Indicator) | ||
| Dynamic torque control 4WD/AWD system | ||
| Combination meter assembly | ||
| 4WD/AWD lock indicator light does not come on (for 4WD/AWD) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (Indicat. 4WD Lock) | ||
| Dynamic torque control 4WD/AWD system | ||
| Combination meter assembly | ||
| Speed limit indicator light does not come on (for Middle East) | CAN communication system (for LHD) | |
| Check indicator/warning light | ||
| Perform Active Test (Indicat. Over Speed) | ||
| Combination meter assembly | ||
| ECM (2AR-FE) | ||
| AUTO LSD indicator light does not come on (for 2WD, w/ VSC) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (Indicat. Auto LSD) | ||
| Vehicle stability control system | ||
| Combination meter assembly | ||
| BSM indicator light does not come on (w/ Blind Spot Monitor System) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (Blind Spot Monitor Indicator) | ||
| Combination meter assembly | ||
| Blind spot monitor sensor | ||
| Automatic high beam indicator light does not come on (w/ Automatic High Beam System) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (Automatic High Beam Indicator) | ||
| Combination meter assembly | ||
| Main body ECU (multiplex network body ECU) (for LHD) | ||
| Main body ECU (multiplex network body ECU) (for RHD) | ||
| Downhill assist control indicator light does not come on (w/ Downhill Assist Control) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (Indicat. Downhill Assist control) | ||
| Vehicle stability control system | ||
| Combination meter assembly | ||
| Cruise control indicator light does not come on (w/ Cruise Control System) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Perform Active Test (Indicat. Lamp Cruise, Cruise Indicator) | ||
| Cruise control system | ||
| Combination meter assembly | ||
| Entry warning light does not come on (w/ Entry and Start System) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Perform Active Test (Smart System Indicator, Smart System Warning) | ||
| Combination meter assembly | ||
| Certification ECU (smart key ECU assembly) | - | |
| High beam indicator light does not come on (High beam headlight operates normally) | Harness or connector | - |
| Combination meter assembly | ||
| Main body ECU (multiplex network body ECU) (for LHD) (w/ Panic Switch) | ||
| Front fog indicator light does not come on (Front fog light operates normally) | Harness or connector | - |
| Combination meter assembly | ||
| Turn indicator light does not come on (Turn signal light operates normally) | Perform Active Test [Turn Signal (Left) Indicator, Turn Signal (Right) Indicator] | |
| Combination meter assembly | ||
| SPORT indicator light does not come on [except Manual Transaxle (for 2WD)] | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Perform Active Test [Indicat. Sport (CVT Sport)] | ||
| Combination meter assembly | ||
| ECM (2AR-FE) (except Manual Transaxle) | ||
| ECM (3ZR-FE) (except Manual Transaxle) | ||
| 4WD ECU assembly [for Manual Transaxle (for 4WD/AWD)] | ||
| ECO MODE indicator light does not come on (except Manual Transaxle) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Perform Active Test (Indicat. ECO MODE) | ||
| Combination meter assembly | ||
| ECM (2AR-FE) | ||
| ECM (3ZR-FE) | ||
| Eco driving indicator light does not come on (except Manual Transaxle) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (Indicat. ECONO) | ||
| Combination meter assembly | ||
| ECM (2AR-FE) | ||
| ECM (3ZR-FE) | ||
| SET indicator light does not come on (w/ Cruise Control System) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Perform Active Test (Indicat. SET) | ||
| Cruise control system | ||
| Combination meter assembly | ||
| Washer level indicator light does not come on (w/ Washer Level Warning System) | Level warning switch assembly | |
| Harness or connector | - | |
| Combination meter assembly |
| Symptom | Suspected Area | Link |
|---|---|---|
| Master warning light does not come on (Other systems operate normally) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (Master Warning) | ||
| Combination meter assembly | ||
| Open door warning light does not come on | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Perform Active Test (Indicat. Lamp Doors All Open) | ||
| Combination meter assembly | ||
| Main body ECU (multiplex network body ECU) (for LHD) | ||
| Main body ECU (multiplex network body ECU) (for RHD) | ||
| Brake warning light does not come on (Brake fluid level normal) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (Indicat. Lamp Brake) | ||
| Anti-lock brake system (w/o VSC) | ||
| Vehicle stability control system (w/ VSC) | ||
| Combination meter assembly | ||
| Front seat belt warning light does not come on | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Perform Active Test (Driver Side Seat Belt) | ||
| Seat belt warning system (w/o Occupant Classification System) | ||
| Combination meter assembly | ||
| SRS warning light does not come on | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (Indicat. Lamp Airbag) | ||
| Airbag system (w/o Occupant Classification System) | ||
| Combination meter assembly | ||
| Engine coolant temperature warning light does not come on | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (Indicat. Lamp Coolant Hot) | ||
| Combination meter assembly | ||
| ECM (1AD-FTV) | ||
| ECM (2AD-FHV) | ||
| ECM (2AD-FTV) | ||
| ECM (2AR-FE) | ||
| ECM (3ZR-FAE) | ||
| ECM (3ZR-FE) | ||
| Engine coolant temperature indicator light (cool) does not come on | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Perform Active Test (Indicat. Lamp Coolant Cool) | ||
| Combination meter assembly | ||
| ECM (1AD-FTV) | ||
| ECM (2AD-FHV) | ||
| ECM (2AD-FTV) | ||
| ECM (2AR-FE) | ||
| ECM (3ZR-FAE) | ||
| ECM (3ZR-FE) | ||
| Charge warning light does not come on | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (Indicat. Lamp Charge) | ||
| Harness or connector | - | |
| Generator assembly (1AD-FTV) | ||
| Generator assembly (2AD-FHV) | ||
| Generator assembly (2AD-FTV) | ||
| Generator assembly (2AR-FE) | ||
| Generator assembly (3ZR-FAE) | ||
| Generator assembly (3ZR-FE) | ||
| Combination meter assembly | ||
| ECM (1AD-FTV) | ||
| ECM (2AD-FHV) | ||
| ECM (2AD-FTV) | ||
| ECM (2AR-FE) | ||
| ECM (3ZR-FAE) | ||
| ECM (3ZR-FE) | ||
| EPS warning light does not come on | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (Indicat. EPS) | ||
| Power steering system | ||
| Combination meter assembly | ||
| MIL does not come on | Check indicator/warning light | |
| ECD system (1AD-FTV) | ||
| ECD system (2AD-FHV) | ||
| ECD system [2AD-FTV (for CCo)] | ||
| ECD system [2AD-FTV (for DPF)] | ||
| SFI system (2AR-FE [w/ Canister Pump Module]) | ||
| SFI system (2AR-FE [w/o Canister Pump Module]) | ||
| SFI system (3ZR-FAE) | ||
| SFI system (3ZR-FE) | ||
| Combination meter assembly | ||
| Slip indicator light does not come on (w/ VSC) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (Indicat. Lamp Slip) | ||
| Vehicle stability control system | ||
| Combination meter assembly | ||
| VSC OFF indicator light does not come on (w/ VSC) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (Indicat. VSC OFF) | ||
| Vehicle stability control system | ||
| Combination meter assembly | ||
| ABS warning light does not come on | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (Indicat. Lamp ABS) | ||
| Anti-lock brake system (w/o VSC) | ||
| Vehicle stability control system (w/ VSC) | ||
| Combination meter assembly | ||
| Tire pressure warning light does not come on (w/ Tire Pressure Warning System) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (Indicat. Tire Pressure Warning System) | ||
| Tire pressure warning system | ||
| Combination meter assembly | ||
| Fuel level warning light does not come on (Fuel receiver gauge operates normally) | Perform Active Test (Indicat. Lamp Fuel) | |
| Combination meter assembly | ||
| Glow indicator light does not come on (Engine Type Diesel) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Perform Active Test (Indicat. GLOW) | ||
| Combination meter assembly | ||
| ECM (1AD-FTV) | ||
| ECM (2AD-FHV) | ||
| ECM (2AD-FTV) | ||
| Rear fog indicator light does not come on (Rear fog light operates normally) (w/ Rear Fog Light) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Perform Active Test (Indicat. Lamp Rr FOG) | ||
| Combination meter assembly | ||
| Main body ECU (multiplex network body ECU) (for LHD) | ||
| Main body ECU (multiplex network body ECU) (for RHD) | ||
| Headlight beam level control system warning light does not come on (w/ Automatic Headlight Beam Level Control System) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Automatic headlight beam level control system | ||
| Combination meter assembly | ||
| 4WD/AWD lock indicator light does not come on (for 4WD/AWD) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (Indicat. 4WD Lock) | ||
| Dynamic torque control 4WD/AWD system | ||
| Combination meter assembly | ||
| Stop and start cancel indicator light does not come on (w/ Stop and Start System) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (Stop and Start OFF Indicator) | ||
| Combination meter assembly | ||
| Engine stop and start ECU | ||
| AUTO LSD indicator light does not come on (for 2WD, w/ VSC) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (Indicat. Auto LSD) | ||
| Vehicle stability control system | ||
| Combination meter assembly | ||
| BSM indicator light does not come on (w/ Blind Spot Monitor System) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (Blind Spot Monitor Indicator) | ||
| Combination meter assembly | ||
| Blind spot monitor sensor | ||
| Automatic high beam indicator light does not come on (w/ Automatic High Beam System) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (Automatic High Beam Indicator) | ||
| Combination meter assembly | ||
| Main body ECU (multiplex network body ECU) (for LHD) | ||
| Main body ECU (multiplex network body ECU) (for RHD) | ||
| Lane departure alert indicator light does not come on (w/ Lane Departure Alert System) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Perform Active Test (LDA Control Indicator) | ||
| Combination meter assembly | ||
| Lane departure warning camera | ||
| Cruise control indicator light does not come on (w/ Cruise Control System) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Perform Active Test (Indicat. Lamp Cruise) | ||
| Cruise control system | ||
| Combination meter assembly | ||
| High beam indicator light does not come on (High beam headlight operates normally) | Harness or connector | - |
| Combination meter assembly | ||
| Downhill assist control indicator light does not come on (w/ Downhill Assist Control) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (Indicat. Downhill Assist control) | ||
| Vehicle stability control system | ||
| Combination meter assembly | ||
| Front fog indicator light does not come on (Front fog light operates normally) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Perform Active Test (Indicat. Lamp Fr FOG) | ||
| Combination meter assembly | ||
| Main body ECU (multiplex network body ECU) (for LHD) | ||
| Main body ECU (multiplex network body ECU) (for RHD) | ||
| Turn indicator light does not come on (Turn signal light operates normally) | Perform Active Test [Turn Signal (Left) Indicator, Turn Signal (Right) Indicator] | |
| Combination meter assembly | ||
| SPORT indicator light does not come on [except Manual Transaxle (for 2WD)] | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Perform Active Test [Indicat. Sport (CVT Sport)] | ||
| Combination meter assembly | ||
| ECM (2AD-FHV) (except Manual Transaxle) | ||
| ECM (2AD-FTV) (except Manual Transaxle) | ||
| ECM (2AR-FE) (except Manual Transaxle) | ||
| ECM (3ZR-FAE) (except Manual Transaxle) | ||
| ECM (3ZR-FE) (except Manual Transaxle) | ||
| 4WD ECU assembly [for Manual Transaxle (for 4WD/AWD)] | ||
| ECO MODE indicator light does not come on (except Manual Transaxle) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Perform Active Test (Indicat. ECO MODE) | ||
| Combination meter assembly | ||
| ECM (2AD-FHV) | ||
| ECM (2AD-FTV) | ||
| ECM (2AR-FE) | ||
| ECM (3ZR-FAE) | ||
| ECM (3ZR-FE) | ||
| Eco driving indicator light does not come on (except Manual Transaxle) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (Indicat. ECONO) | ||
| Combination meter assembly | ||
| ECM (2AD-FHV) | ||
| ECM (2AD-FTV) | ||
| ECM (2AR-FE) | ||
| ECM (3ZR-FAE) | ||
| ECM (3ZR-FE) | ||
| SIL indicator light does not come on (for Manual Transaxle) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test [Indicat. SIL (Up), Indicat. SIL (Down)] | ||
| Combination meter assembly | ||
| ECM (1AD-FTV) | ||
| ECM (2AD-FHV) | ||
| ECM (2AD-FTV) | ||
| ECM (2AR-FE) | ||
| ECM (3ZR-FAE) | ||
| ECM (3ZR-FE) | ||
| SET indicator light does not come on (w/ Cruise Control System) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Perform Active Test (Indicat. SET) | ||
| Cruise control system | ||
| Combination meter assembly | ||
| Stop and start indicator light does not come on (w/ Stop and Start System) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Check indicator/warning light | ||
| Perform Active Test (Stop and Start ON Indicator) | ||
| Combination meter assembly | ||
| Engine stop and start ECU |
| Symptom | Suspected Area | Link |
|---|---|---|
| Engine coolant temperature receiver gauge display malfunction | Engine coolant temperature receiver gauge circuit | |
| Eco driving indicator zone display malfunction (except Manual Transaxle) | Check customize setting | |
| CAN communication system (for LHD) | ||
| CAN communication system (for RHD) | ||
| Combination meter assembly | ||
| ECM (2AR-FE) | ||
| ECM (3ZR-FE) | ||
| Outside temperature display malfunction | Thermistor assembly | - |
| Harness or connector | - | |
| Combination meter assembly | ||
| Shift position indicator display malfunction (except Manual Transaxle) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Perform Active Test (A/T Indicator Operation 1, A/T Indicator Operation 2, A/T Indicator Operation 3) | ||
| Automatic transaxle system (U760E) | ||
| Automatic transaxle system (U760F) | ||
| Continuously variable transaxle system (K111) | ||
| Continuously variable transaxle system (K111F) | ||
| Combination meter assembly | ||
| ECM (2AR-FE) | ||
| ECM (3ZR-FE) | ||
| Current fuel consumption display malfunction (Combination meter assembly operates normally) | Combination meter assembly | |
| Average fuel consumption display malfunction (Combination meter assembly operates normally) | Combination meter assembly | |
| Cruising range display malfunction (Combination meter assembly operates normally) | Combination meter assembly | |
| Average vehicle speed display malfunction (Combination meter assembly operates normally) | Combination meter assembly | |
| ODO/TRIP meter display malfunction (Combination meter assembly operates normally) | Combination meter assembly | |
| Light control rheostat display malfunction (Combination meter assembly operates normally) | Combination meter assembly | |
| Multi-information display is missing dots | Perform Active Test (Meter Display 1, Meter Display 2) | |
| Combination meter assembly | ||
| Customize setting display malfunction | Combination meter assembly |
| Symptom | Suspected Area | Link |
|---|---|---|
| Engine coolant temperature receiver gauge display malfunction | Engine coolant temperature receiver gauge circuit | |
| Eco driving indicator zone display malfunction (except Manual Transaxle) | Check customize setting | |
| CAN communication system (for LHD) | ||
| CAN communication system (for RHD) | ||
| Combination meter assembly | ||
| ECM (2AD-FHV) | ||
| ECM (2AD-FTV) | ||
| ECM (2AR-FE) | ||
| ECM (3ZR-FAE) | ||
| ECM (3ZR-FE) | ||
| Outside temperature display malfunction | Thermistor assembly | - |
| Harness or connector | - | |
| Combination meter assembly | ||
| Current fuel consumption display malfunction (Combination meter assembly operates normally) | Combination meter assembly | |
| Average fuel consumption display malfunction (Combination meter assembly operates normally) | Combination meter assembly | |
| Cruising range display malfunction (Combination meter assembly operates normally) | Combination meter assembly | |
| Average vehicle speed display malfunction (Combination meter assembly operates normally) | Combination meter assembly | |
| Elapsed time display malfunction (Combination meter assembly operates normally) | Combination meter assembly | |
| Eco time display malfunction (w/ Stop and Start System) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Stop and start system | ||
| Combination meter assembly | ||
| Engine stop and start ECU | ||
| Eco ODO display malfunction (w/ Stop and Start System) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Stop and start system | ||
| Combination meter assembly | ||
| Engine stop and start ECU | ||
| ODO/TRIP meter display malfunction (Combination meter assembly operates normally) | Combination meter assembly | |
| Light control rheostat display malfunction (Combination meter assembly operates normally) | Combination meter assembly | |
| Open door message display malfunction (Other systems operate normally) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Combination meter assembly | ||
| Main body ECU (multiplex network body ECU) (for LHD) | ||
| Main body ECU (multiplex network body ECU) (for RHD) | ||
| "RELEASE PARKING BRAKE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Parking brake system | ||
| Combination meter assembly | ||
| Main body ECU (multiplex network body ECU) (for LHD) | ||
| Main body ECU (multiplex network body ECU) (for RHD) | ||
| "KEY NOT DETECTED" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Entry and start system (for Start Function) | ||
| Combination meter assembly | ||
| Certification ECU (smart key ECU assembly) | - | |
| "CHECK CRUISE CONTROL SYSTEM" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Cruise Control System) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Cruise control system | ||
| Combination meter assembly | ||
| ECM (1AD-FTV) | ||
| ECM (2AD-FHV) | ||
| ECM (2AD-FTV) | ||
| ECM (2AR-FE) | ||
| ECM (3ZR-FAE) | ||
| ECM (3ZR-FE) | ||
| "CHECK LDA SYSTEM" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Lane Departure Alert System) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Lane departure alert system | ||
| Combination meter assembly | ||
| Lane departure warning camera | ||
| "CHECK BSM SYSTEM" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Blind Spot Monitor System) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Blind spot monitor system | ||
| Combination meter assembly | ||
| Blind spot monitor sensor | ||
| "ENGINE OIL PRESSURE LOW" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (Engine Type Diesel, except 1AD-FTV) | Engine oil pressure switch assembly (2AD-FHV) | |
| Engine oil pressure switch assembly (2AD-FTV) | ||
| Harness or connector | - | |
| Combination meter assembly | ||
| "HIGH TRANSMISSION FLUID TEMPERATURE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (except Manual Transaxle) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Automatic transaxle system (U660F) | ||
| Automatic transaxle system (U760E) | ||
| Automatic transaxle system (U760F) | ||
| Continuously variable transaxle system (K111) | ||
| Continuously variable transaxle system (K111F) | ||
| Combination meter assembly | ||
| ECM (2AD-FHV) | ||
| ECM (2AD-FTV) | ||
| ECM (2AR-FE) | ||
| ECM (3ZR-FAE) | ||
| ECM (3ZR-FE) | ||
| "CHECK 4WD SYSTEM" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for 4WD/AWD) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Dynamic torque control 4WD/AWD system | ||
| Combination meter assembly | ||
| 4WD ECU assembly | ||
| "TURN LIGHTS OFF" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Lighting system | ||
| Combination meter assembly | ||
| Main body ECU (multiplex network body ECU) (for LHD) | ||
| Main body ECU (multiplex network body ECU) (for RHD) | ||
| "MOONROOF OPEN" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Sliding Roof) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Sliding roof system | ||
| Combination meter assembly | ||
| Main body ECU (multiplex network body ECU) (for LHD) | ||
| Main body ECU (multiplex network body ECU) (for RHD) | ||
| "DEPRESS BRAKE PEDAL, TOUCH ENGINE SWITCH WITH KEY" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System, except Manual Transaxle) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Entry and start system (for Start Function) | ||
| Combination meter assembly | ||
| Certification ECU (smart key ECU assembly) | - | |
| "DEPRESS CLUTCH PEDAL, TOUCH ENGINE SWITCH WITH KEY" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System, for Manual Transaxle) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Entry and start system (for Start Function) | ||
| Combination meter assembly | ||
| Certification ECU (smart key ECU assembly) | - | |
| "DEPRESS BRAKE PEDAL AND PUSH ENGINE SWITCH TO START" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System, except Manual Transaxle) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Entry and start system (for Start Function) | ||
| Combination meter assembly | ||
| Certification ECU (smart key ECU assembly) | - | |
| "DEPRESS CLUTCH PEDAL AND PUSH ENGINE SWITCH TO START" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System, for Manual Transaxle) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Entry and start system (for Start Function) | ||
| Combination meter assembly | ||
| Certification ECU (smart key ECU assembly) | - | |
| "SHIFT TO P POSITION TO START" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System, except Manual Transaxle) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Entry and start system (for Start Function) | ||
| Combination meter assembly | ||
| Certification ECU (smart key ECU assembly) | - | |
| "DRAIN WATER FROM FUEL FILTER" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (Engine Type Diesel) | Level warning switch (1AD-FTV) | |
| Level warning switch (2AD-FHV) | ||
| Level warning switch (2AD-FTV) | ||
| Harness or connector | - | |
| Combination meter assembly | ||
| "ENGINE OIL LOW" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (Engine Type Diesel) | Engine oil level sensor (1AD-FTV) | |
| Engine oil level sensor (2AD-FHV) | ||
| Engine oil level sensor (2AD-FTV) | ||
| Harness or connector | - | |
| Combination meter assembly | ||
| "CHECK AHB SYSTEM" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Automatic High Beam System) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Automatic high beam system | ||
| Combination meter assembly | ||
| Main body ECU (multiplex network body ECU) (for LHD) | ||
| Main body ECU (multiplex network body ECU) (for RHD) | ||
| "DPF FULL ENGINE SERVICE REQUIRED" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (Engine Type Diesel, except CCo) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| ECD system (1AD-FTV) | ||
| ECD system (2AD-FHV) | ||
| ECD system [2AD-FTV (for DPF)] | ||
| Combination meter assembly | ||
| ECM (1AD-FTV) | ||
| ECM (2AD-FHV) | ||
| ECM (2AD-FTV) | ||
| "TRC OFF" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ VSC, for 4WD/AWD) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Vehicle stability control system | ||
| Combination meter assembly | ||
| Brake actuator assembly (skid control ECU) | ||
| "OIL MAINTENANCE REQUIRED SOON" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| ECD system (1AD-FTV) | ||
| ECD system (2AD-FHV) | ||
| ECD system [2AD-FTV (for CCo)] | ||
| ECD system [2AD-FTV (for DPF)] | ||
| SFI system (2AR-FE [w/ Canister Pump Module]) | ||
| SFI system (2AR-FE [w/o Canister Pump Module]) | ||
| SFI system (3ZR-FAE) | ||
| SFI system (3ZR-FE) | ||
| Combination meter assembly | ||
| ECM (1AD-FTV) | ||
| ECM (2AD-FHV) | ||
| ECM (2AD-FTV) | ||
| ECM (2AR-FE) | ||
| ECM (3ZR-FAE) | ||
| ECM (3ZR-FE) | ||
| "OIL MAINTENANCE REQUIRED" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| ECD system (1AD-FTV) | ||
| ECD system (2AD-FHV) | ||
| ECD system [2AD-FTV (for CCo)] | ||
| ECD system [2AD-FTV (for DPF)] | ||
| SFI system (2AR-FE [w/ Canister Pump Module]) | ||
| SFI system (2AR-FE [w/o Canister Pump Module]) | ||
| SFI system (3ZR-FAE) | ||
| SFI system (3ZR-FE) | ||
| Combination meter assembly | ||
| ECM (1AD-FTV) | ||
| ECM (2AD-FHV) | ||
| ECM (2AD-FTV) | ||
| ECM (2AR-FE) | ||
| ECM (3ZR-FAE) | ||
| ECM (3ZR-FE) | ||
| "RESETTING OIL MAINTENANCE DATA" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| ECD system (1AD-FTV) | ||
| ECD system (2AD-FHV) | ||
| ECD system [2AD-FTV (for CCo)] | ||
| ECD system [2AD-FTV (for DPF)] | ||
| SFI system (2AR-FE [w/ Canister Pump Module]) | ||
| SFI system (2AR-FE [w/o Canister Pump Module]) | ||
| SFI system (3ZR-FAE) | ||
| SFI system (3ZR-FE) | ||
| Combination meter assembly | ||
| ECM (1AD-FTV) | ||
| ECM (2AD-FHV) | ||
| ECM (2AD-FTV) | ||
| ECM (2AR-FE) | ||
| ECM (3ZR-FAE) | ||
| ECM (3ZR-FE) | ||
| "RESETTING OF OIL MAINTENANCE DATA INCOMPLETE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| ECD system (1AD-FTV) | ||
| ECD system (2AD-FHV) | ||
| ECD system [2AD-FTV (for CCo)] | ||
| ECD system [2AD-FTV (for DPF)] | ||
| SFI system (2AR-FE [w/ Canister Pump Module]) | ||
| SFI system (2AR-FE [w/o Canister Pump Module]) | ||
| SFI system (3ZR-FAE) | ||
| SFI system (3ZR-FE) | ||
| Combination meter assembly | ||
| ECM (1AD-FTV) | ||
| ECM (2AD-FHV) | ||
| ECM (2AD-FTV) | ||
| ECM (2AR-FE) | ||
| ECM (3ZR-FAE) | ||
| ECM (3ZR-FE) | ||
| Multi-information display is missing dots | Perform Active Test (Meter Display 1) | |
| Combination meter assembly | ||
| Customize setting display malfunction | Combination meter assembly |
| Symptom | Suspected Area | Link |
|---|---|---|
| Seat belt warning buzzer does not operate (Seat belt warning light operates normally) | Combination meter assembly | |
| EPS buzzer does not operate (Power steering system operates normally) | Combination meter assembly | |
| Entry and start system buzzer does not operate (Entry and start system operates normally) (w/ Entry and Start System) | Combination meter assembly | |
| Stop and start system warning buzzer does not operate (Stop and start system operates normally) (w/ Stop and Start System) | Combination meter assembly | |
| Key reminder buzzer does not operate (w/o Entry and Start System) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Key reminder warning system | ||
| Combination meter assembly | ||
| Main body ECU (multiplex network body ECU) (for LHD) | ||
| Main body ECU (multiplex network body ECU) (for RHD) | ||
| Brake buzzer does not operate (Other systems operate normally) | Combination meter assembly | |
| Engine immobiliser certification buzzer does not operate (Immobiliser system operates normally) | Combination meter assembly | |
| Speed limit buzzer does not operate (Speed limit indicator light operates normally) (for Middle East) | Combination meter assembly | |
| PKB-ON driving warning buzzer does not operate (Brake warning light operates normally) | Combination meter assembly | |
| Driving with any door opened warning buzzer does not operate (Other systems operate normally) | Combination meter assembly | |
| Sports shift reject buzzer does not operate (Other systems operate normally) (except Manual Transaxle) | Combination meter assembly | |
| Light reminder buzzer does not operate | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Lighting system | ||
| Combination meter assembly | ||
| Main body ECU (multiplex network body ECU) (for LHD) | ||
| Main body ECU (multiplex network body ECU) (for RHD) | ||
| Turn signal flasher buzzer does not operate (Turn signal light operates normally) | Combination meter assembly |
| Symptom | Suspected Area | Link |
|---|---|---|
| Meter illumination is always dark | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Lighting system | ||
| Combination meter assembly | ||
| Main body ECU (multiplex network body ECU) (for LHD) | ||
| Main body ECU (multiplex network body ECU) (for RHD) | ||
| Multi-information display does not change using DISP switch | Read the Data List (Multi Display Select Switch) (for Dot Display Type) | |
| Read the Data List (ODO/TRIP Change SW) (for Segment Display Type) | ||
| Steering pad switch assembly | ||
| Spiral cable sub-assembly (for Single Type) | ||
| Spiral cable sub-assembly (for Dual Type) | ||
| Harness or connector | - | |
| Combination meter assembly | ||
| Multi-information display does not change using ODO/TRIP switch (for Dot Display Type) | Read the Data List (ODO/TRIP Change SW) | |
| Combination meter assembly | ||
| Shift position indicator malfunction (for Dot Display Type, except Manual Transaxle) | CAN communication system (for LHD) | |
| CAN communication system (for RHD) | ||
| Perform Active Test (A/T Indicator Operation 1, A/T Indicator Operation 2, A/T Indicator Operation 3) | ||
| Automatic transaxle system (U660F) | ||
| Automatic transaxle system (U760E) | ||
| Automatic transaxle system (U760F) | ||
| Continuously variable transaxle system (K111) | ||
| Continuously variable transaxle system (K111F) | ||
| Combination meter assembly | ||
| ECM (2AD-FHV) | ||
| ECM (2AD-FTV) | ||
| ECM (2AR-FE) | ||
| ECM (3ZR-FAE) | ||
| ECM (3ZR-FE) |