COMBINATION METER REMOVAL
CAUTION / NOTICE / HINT
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
PROCEDURE
PRECAUTION
Note:After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Note:When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereClick hereClick hereClick hereClick hereClick here
REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL
REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL
REMOVE COMBINATION METER ASSEMBLY
-
Remove the 2 screws.
Detach the 2 clips and remove the combination meter assembly.
-
Disconnect the 2 connectors.
-