ECM REMOVAL
PROCEDURE
PERFORM REGISTRATION
PRECAUTION
Note:After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Note:When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereClick hereClick hereClick hereClick hereClick here
REMOVE NO. 1 ENGINE COVER
REMOVE AIR CLEANER CAP SUB-ASSEMBLY
REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY
REMOVE AIR CLEANER CASE
REMOVE ECM
Disconnect the 2 ECM connectors.
-
*1
Lock
*a
Push
Raise the 2 levers while pushing the locks on the levers and disconnect the 2 ECM connectors.
Note:After disconnecting the ECM connectors, make sure that dirt, water or other foreign matter does not contact the connecting parts of the ECM connectors.
-
-
Remove the 3 bolts and ECM with bracket.
-
Remove the 4 screws, No. 1 ECM bracket and No. 2 ECM bracket.