ROOM TEMPERATURE SENSOR(for Front Side) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.

PROCEDURE


  1. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

    Click here

  2. REMOVE INNER NO. 1 INSTRUMENT PANEL BRACKET COVER LH

    Click here

  3. REMOVE INSTRUMENT SIDE PANEL LH

    Click here

  4. REMOVE NO. 1 SWITCH HOLE BASE

    Click here

  5. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  6. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  7. REMOVE COOLER THERMISTOR (ROOM TEMPERATURE SENSOR)

    A01WWKF
    Text in Illustration
    B0018FC Connector
    B00199O Aspirator Hose

    1. Disconnect the connector.

    2. Disconnect the aspirator hose and remove the cooler thermistor (room temperature sensor).