AIR CONDITIONING AMPLIFIER REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE UPPER RADIATOR SUPPORT SEAL

   Click here

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   CAUTION:

   Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

3. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

   Click here

4. REMOVE INNER NO. 1 INSTRUMENT PANEL BRACKET COVER RH

   Click here

5. REMOVE FRONT DOOR SCUFF PLATE RH

   Click here

6. REMOVE INSTRUMENT SIDE PANEL RH

   Click here

7. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

8. REMOVE LOWER NO. 2 INSTRUMENT PANEL AIR BAG ASSEMBLY

   Click here

9. REMOVE INSTRUMENT PANEL BOX DOOR KNOB

   Click here

10. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click here

11. REMOVE NO. 2 AIR DUCT SUB-ASSEMBLY

    

    
    

    1. Remove the screw and No. 2 air duct sub-assembly.

12. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY

    

    
    

    1. Disconnect the 3 connectors.

    2. Remove the screw.

       Text in Illustration

       	Screw
       	Connector

    3. 

       Remove the air conditioning amplifier assembly.