CURTAIN SHIELD AIRBAG CUTOFF SWITCH REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE UPPER RADIATOR SUPPORT SEAL

   Click here

2. PRECAUTION

   CAUTION:

   Be sure to read Precaution thoroughly before servicing Click here.

   Note

   After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Click here.

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   CAUTION:

   Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

4. REMOVE INSTRUMENT SIDE PANEL LH

   Click here

5. REMOVE NO. 1 SWITCH HOLE BASE

   Click here

6. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

7. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

   Click here

8. REMOVE INNER NO. 1 INSTRUMENT PANEL BRACKET COVER LH

   Click here

9. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

   Click here

10. REMOVE INSTRUMENT PANEL BOX ASSEMBLY

    Click here

11. REMOVE NO. 2 COMBINATION SWITCH ASSEMBLY

    
    

    1. 

       Detach the 4 claws and remove the No. 2 combination switch assembly.