MULTI-DISPLAY REMOVAL

PROCEDURE

1. REMOVE UPPER RADIATOR SUPPORT SEAL

   Click here

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

3. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

   Click here

4. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

   Click here

5. REMOVE INSTRUMENT SIDE PANEL LH

   Click here

6. REMOVE INSTRUMENT SIDE PANEL RH

   Click here

7. REMOVE NO. 1 SWITCH HOLE BASE

   Click here

8. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

   Click here

9. REMOVE INSTRUMENT PANEL MOULDING SUB-ASSEMBLY

   Click here

10. REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY

    Click here

11. REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

    Click here

12. REMOVE ACCESSORY METER ASSEMBLY

    
    

    1. 

       Remove the 2 bolts.

    2. Detach the 3 claws and remove the accessory meter assembly as indicated by the arrows in the order shown in the illustration.

    3. Disconnect the connectors on the backside and remove the accessory meter assembly.