RADIO RECEIVER REMOVAL

PROCEDURE


  1. REMOVE UPPER RADIATOR SUPPORT SEAL

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE INSTRUMENT SIDE PANEL RH

    Click here

  4. REMOVE INSTRUMENT SIDE PANEL LH

    Click here

  5. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

    Click here

  6. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

    Click here

  7. REMOVE NO. 1 SWITCH HOLE BASE

    Click here

  8. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  9. REMOVE INSTRUMENT PANEL MOULDING SUB-ASSEMBLY

    Click here

  10. REMOVE MULTI-MEDIA MODULE RECEIVER ASSEMBLY WITH BRACKET


    1. B0018ZW

      Remove the 2 bolts.

    2. Pull the multi-media module receiver assembly to detach the 4 claws and 2 clips on the backside of the multi-media module receiver assembly with bracket.

    3. Disconnect the connectors and remove the multi-media module receiver assembly with bracket.

  11. REMOVE NO. 1 RADIO BRACKET


    1. B0018M8

      Remove the 3 bolts and No. 1 radio bracket.

  12. REMOVE NO. 2 RADIO BRACKET


    1. B0018S3

      Remove the 3 bolts and No. 2 radio bracket.