HAZARD WARNING SWITCH REMOVAL

PROCEDURE


  1. REMOVE UPPER RADIATOR SUPPORT SEAL

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

    Click here

  4. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

    Click here

  5. REMOVE INSTRUMENT SIDE PANEL LH

    Click here

  6. REMOVE INSTRUMENT SIDE PANEL RH

    Click here

  7. REMOVE NO. 1 SWITCH HOLE BASE

    Click here

  8. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  9. REMOVE INSTRUMENT PANEL MOULDING SUB-ASSEMBLY

    Click here

  10. REMOVE MULTI-MEDIA MODULE RECEIVER ASSEMBLY


    1. B0018HV

      Remove the 2 bolts.

    2. B0018GH

      Pull the multi-media module receiver assembly to detach the 6 claws on the backside of the multi-media module receiver assembly.

    3. Disconnect the connectors and remove the multi-media module receiver assembly.