RADIO ANTENNA CORD INSTALLATION

PROCEDURE


  1. INSTALL NO. 3 ANTENNA CORD SUB-ASSEMBLY


    1. Attach the 5 clamps and install the No. 3 antenna cord sub-assembly.

      A000N3YE02
      Text in Illustration
      *a w/ Digital Audio Broadcasting - -
    2. Connect the connectors.

  2. INSTALL ROOF HEADLINING ASSEMBLY

    Click here

  3. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY


    1. Attach the 5 clips labeled A.

      A000PWBE04
    2. Attach the 3 clamps labeled B to the floor stud bolts.

    3. Attach the clip labeled C.

    4. Attach the 2 clips labeled D.

    5. Install the bolt labeled E.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }
    6. Install the bolt labeled F.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }
    7. Install the bolt labeled G.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }
    8. Connect the connectors labeled H to install the No. 2 antenna cord sub-assembly.

  4. INSTALL INNER ROOF SIDE GARNISH RH

    Click here

  5. INSTALL REAR SEAT SIDE GARNISH RH

    Click here

  6. INSTALL REAR DOOR SCUFF PLATE RH

    Click here

  7. INSTALL REAR SEAT ASSEMBLY

    Click here

  8. INSTALL FRONT SEAT ASSEMBLY RH

    Click here

  9. INSTALL CONSOLE BOX ASSEMBLY

    Click here

  10. INSTALL ANTENNA CORD SUB-ASSEMBLY


    1. Attach the 2 clamps to install the antenna cord sub-assembly.

    2. Connect the connector.

  11. INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY

    Click here

  12. INSTALL UPPER CONSOLE PANEL

    Click here

  13. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  14. INSTALL INSTRUMENT PANEL CUP HOLDER ASSEMBLY

    Click here

  15. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  16. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  17. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL

    Click here

  18. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  19. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

  20. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here

  21. CHECK SRS WARNING LIGHT

    Click here