CAUTION / NOTICE / HINT
Tech Tips
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
A bolt without a torque specification is shown in the standard bolt chart Click here.
PROCEDURE
INSTALL CONSOLE BOX ASSEMBLY
Install the console box assembly with the 2 screws and 5 bolts.
Connect the connectors and attach the clamp.
*1 | Screw | *2 | Bolt |
INSTALL REAR CONSOLE END PANEL
Connect the connector.
Attach the 4 clips, 2 claws and 2 guides to install the rear console end panel.
INSTALL INSTRUMENT PANEL CUP HOLDER ASSEMBLY
Connect the connector.
Attach the 4 clips to install the instrument panel cup holder assembly.
INSTALL UPPER CONSOLE PANEL
*1 | Upper Console Panel |
*2 | Upper Rear Console Panel Sub-assembly |
*3 | Remote Touch Assembly |
Connect the connectors and attach the clamp.
Attach the 9 clips to install the upper console panel together with the upper rear console panel sub-assembly and remote touch assembly.
Install the 2 screws.
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
Install the shift lever knob and twist it in the direction indicated by the arrow.
Attach the claw to install the shifting hole cover.
*1 | Shifting Hole Cover | - | - |
INSTALL INSTRUMENT PANEL FINISH PANEL END LH
Attach the 5 clips and 2 guides to install the instrument panel finish panel end LH.
INSTALL INSTRUMENT PANEL FINISH PANEL END RH
Attach the 5 clips and 2 guides to install the instrument panel finish panel end RH.
INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL
Connect the connector.
Attach the 9 clips and guide to install the center instrument cluster finish panel.