LUGGAGE DOOR HINGE TORSION BAR INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Remove the luggage door hinge torsion bar while holding the luggage compartment door panel.

Note


  • Install the luggage door hinge torsion bar RH first, and then the luggage door hinge torsion bar LH.

  • After installing the luggage door hinge torsion bar, use your hand to open and close the luggage compartment door panel. Make sure the luggage compartment door panel opens and closes smoothly.

PROCEDURE


  1. INSTALL LUGGAGE COMPARTMENT DOOR TORSION BAR SUPPORT


    1. Rotate the luggage compartment door torsion bar support to install the luggage compartment door torsion bar support.

  2. INSTALL LUGGAGE DOOR HINGE TORSION BAR RH


    1. B002BK4E02
      Text in Illustration
      *1 Washer (90201-10008)

      Install the washer (90201-10008) to SST as shown in the illustration.

      SST
      09804-24010
      Standard
      Area Specified Condition
      A 4.5 mm (0.177 in.)
    2. B002BCP

      Attach the 3 guides.

    3. B002B4O

      Using SST, connect the luggage door hinge torsion bar RH to the luggage compartment door hinge as shown in the illustration.

    4. Connect the luggage door hinge torsion bar RH to the luggage compartment door torsion bar support.

  3. INSTALL LUGGAGE DOOR HINGE TORSION BAR LH


    1. B002B83E02
      Text in Illustration
      *1 Washer (90201-10008)

      Install the washer (90201-10008) to SST as shown in the illustration.

      SST
      09804-24010
      Standard
      Area Specified Condition
      A 4.5 mm (0.177 in.)
    2. B002BO6

      Attach the 3 guides.

    3. B002BSV

      Using SST, connect the luggage door hinge torsion bar LH to the luggage compartment door hinge as shown in the illustration.

    4. Connect the luggage door hinge torsion bar LH to the luggage compartment door torsion bar support.

    5. Attach the 2 claws to close the cover.

  4. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER LH

    Click here

  5. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER RH

    Click here

  6. INSTALL LUGGAGE COMPARTMENT DOOR COVER

    Click here

  7. INSTALL SWITCH BEZEL (w/ Power Trunk Lid System)

    Click here

  8. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP

    Click here

  9. INSTALL LUGGAGE COMPARTMENT DOOR INSIDE HANDLE (w/ Handle)

    Click here

  10. INSTALL LUGGAGE LOCK CONTROL CABLE PLATE (w/ Handle)

    Click here

  11. INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER LH


    1. Attach the clip to install the luggage compartment trim inner cover LH.

    2. Attach the 2 claws to install the clip.

    3. Install the clip.

  12. INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER RH


    1. Attach the clip to install the luggage compartment trim inner cover RH.

    2. Attach the 2 claws to install the clip.

    3. Install the clip.

  13. INSTALL ROPE HOOK

    Tech Tips

    Use the same procedure for both rope hooks


    1. Install the rope hook.

  14. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER


    1. Install the front luggage compartment trim cover with the 3 clips and 2 nuts.

  15. INSTALL REAR FLOOR FINISH PLATE


    1. Attach the 6 clips to install the rear floor finish plate.

    2. Install the 3 clips.

  16. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER


    1. Attach the 3 guides to install the rear luggage compartment trim cover

    2. Install the 5 clips.

    3. Install the 3 No. 2 luggage compartment trim hooks.

  17. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

  18. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK


    1. Attach the 2 claws to install the No. 1 luggage compartment trim hook.

  19. INSTALL REAR LUGGAGE COMPARTMENT TRAY BRACKET LH


    1. Attach the claw to install the rear luggage compartment tray bracket LH.

    2. Install the clip.

  20. INSTALL REAR LUGGAGE COMPARTMENT TRAY BRACKET RH

    Tech Tips

    Use the same procedure described for the LH side.

  21. INSTALL ROPE HOOK ASSEMBLY

    Tech Tips

    Use the same procedure for all rope hooks.


    1. Install the rope hook assembly with the bolt.

    2. Attach the 2 claws to close the cover.

  22. INSTALL LUGGAGE COMPARTMENT SIDE TRAY (w/ Spare Tire)


    1. Install the luggage compartment side tray.

  23. INSTALL SPARE WHEEL COVER TRAY (w/o Spare Tire)


    1. Install the spare wheel cover tray.

  24. INSTALL LUGGAGE COMPARTMENT TRIM BOX (w/o Spare Tire)


    1. Install the luggage compartment trim box.

  25. INSTALL SIDE TRIM BOX


    1. Install the side trim box.

  26. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH


    1. Install the luggage compartment trim cover LH.

  27. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH


    1. Install the luggage compartment trim cover RH.

  28. INSTALL LUGGAGE COMPARTMENT FLOOR MAT


    1. Install the luggage compartment floor mat.