RADIO RECEIVER INSTALLATION

PROCEDURE


  1. INSTALL NO. 1 RADIO BRACKET


    1. A000R32E01

      Install the No. 1 radio bracket with the 3 screws.

    2. Install the ion generator bracket with the screw labeled A.

  2. INSTALL NO. 2 RADIO BRACKET


    1. A000NDAE02

      Install the No. 2 radio bracket with the 3 screws.

    2. Install the ion generator bracket with the screw labeled A.

  3. INSTALL NO. 1 ION GENERATOR SUB-ASSEMBLY

    Click here

  4. INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY WITH BRACKET


    1. Connect the connectors.

    2. A000QJ5

      Insert the multi-media module receiver assembly with bracket.

      Note

      When inserting the multi-media module receiver, do not press the knobs on it.

    3. Attach the 2 claws and 2 clips.

    4. Install the multi-media module receiver assembly with bracket with the 2 screws.

  5. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL

    Click here

  6. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  7. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

  8. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here

  9. REGISTRATION TELEMATICS TRANSCEIVER

    Click here


    1. When replacing the multi-media module receiver assembly or telematics transceiver, perform the vehicle contract setting (See page , Click here.