ТОПЛИВНЫЙ НАСОС УСТАНОВКА

PROCEDURE


  1. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY


    1. Apply a light coat of gasoline to a new gasket, and install it to the fuel tank.

    2. A001ETF

      Connect the fuel hose, and set the fuel suction with pump and gauge.

      Note


      • Be careful not to bend the arm of the fuel sender gauge.

      • When connecting the fuel hose, do not forcibly pull the hose.

    3. A0018Z1E02
      *1 Protrusion
      *2 Cutout

      Install the set plate with the 8 bolts.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

      Tech Tips

      Align the protrusion of the set plate with the cutout of the fuel suction pump and gauge.

    4. A001EL5

      Install the fuel main tube and fuel return tube with the 2 tube joint clips.

      Note


      • A001DWPE12
      • Check that there are no scratches or foreign objects on the connecting parts.

      • Check that the fuel tube joint is inserted securely.

      • Check that the tube joint clips are on the collars of the fuel tube joints.

      • After installing the tube joint clips, check that the fuel tube joints have not been pulled off.

    5. A001BO6

      Connect the connector to the fuel suction with pump and gauge tube assembly.

  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. INSTALL COWL TOP VENTILATOR LOUVER RH

    Click here

  4. CHECK FOR FUEL LEAKS

    Click here

  5. INSTALL REAR FLOOR NO. 2 SERVICE HOLE COVER


    1. Install the service hole cover with new butyl tape.

  6. INSTALL REAR NO. 1 SEAT ADJUSTER ASSEMBLY


  7. INSTALL REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type)

    Click here