NAVIGATION SYSTEM Display Signal Circuit between Multi-display and Radio Receiver

DESCRIPTION

The display image signal from the multi-media module receiver assembly is sent to the multi-display assembly using a GVIF cable.

PROCEDURE

1. Click here

   CHECK GVIF CABLE CONNECTOR

   
   

   1. Check if the GVIF cable connector between the multi-media module receiver assembly and the multi-display assembly have any connection problems (Click here).

   2. Check that the screen display is normal.

      OK
      Screen display is normal.

   
   
   • OK

     USE SIMULATION METHOD TO CHECK (Click here)

   • NGClick here
2. Click here

   CHECK MULTI-DISPLAY ASSEMBLY

   
   

   1. Replace the multi-display assembly (Click here).

   2. Check that the screen display is normal.

      OK
      Screen display is normal.

   
   
   • OK

     END (MULTI-DISPLAY ASSEMBLY IS DEFECTIVE)

   • NG

     PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)