ROOF HEADLINING(for Standard Body) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

    A001DZ8E01
    Text in Illustration
    *1 Paint Mark
    A001D34 Mark Position

    1. Install the front door opening trim weatherstrip LH as shown in the illustration.

  2. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

    Tech Tips

    Use the same procedure described for the LH side.

  3. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

    A00192AE01
    Text in Illustration
    *1 Paint Mark
    A001D34 Mark Position

    1. Install the rear door opening trim weatherstrip LH as shown in the illustration.

  4. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Tech Tips

    Use the same procedure described for the LH side.

  5. PLACE ROOF HEADLINING ASSEMBLY IN VEHICLE

    A001BF3

    1. Place the roof headlining assembly into the vehicle through the front side.

      Note

      Be careful not to damage the roof headlining assembly when placing it in the cabin.

      Tech Tips

      Place the roof headlining assembly into the vehicle so that the windshield can be installed.

  6. INSTALL WINDSHIELD GLASS

    Click here

  7. INSTALL OBJECT RECOGNITION CAMERA (w/ Lane Keeping Assist System)

    Click here

  8. INSTALL INNER REAR VIEW MIRROR ASSEMBLY


    1. w/o Automatic High Beam System:

      Click here

    2. w/ Automatic High Beam System, Adaptive High Beam System:

      Click here

  9. INSTALL RAIN SENSOR COVER


    1. w/o Lane Keeping Assist System:

      Click here

    2. w/ Lane Keeping Assist System:

      Click here

  10. INSTALL ROOF HEADLINING ASSEMBLY


    1. w/o Sliding Roof, w/o Rear Seat Entertainment System:

      Attach the hook, 12 claws, 3 fasteners and 4 clips to install the roof headlining assembly.

    2. w/o Sliding Roof, w/ Rear Seat Entertainment System:

      Attach the hook, 12 claws, 2 fasteners and 4 clips to install the roof headlining assembly.

    3. w/ Sliding Roof, w/o Rear Seat Entertainment System:

      Attach the hook, 12 claws, 10 fasteners and 4 clips to install the roof headlining assembly.

    4. w/ Sliding Roof, w/ Rear Seat Entertainment System:

      Attach the hook, 12 claws, 8 fasteners and 4 clips to install the roof headlining assembly.

    5. A001EP9E02
      Text in Illustration
      *A w/ Lane Keeping Assist System
      *B w/ Sliding Roof

      Connect each connector and each wire harness clamp.

    6. Connect the roof wire connectors and attach each wire harness clamp.

  11. INSTALL VISOR HOLDER

    Tech Tips

    Use the same procedure to install the visor holder on the other side.


    1. Attach the 2 claws to install the visor holder.

    2. Push in the visor holder and turn it approximately 45° as shown in the illustration.

      A0019OIE06
      Text in Illustration
      *a 45° - -

  12. INSTALL VISOR ASSEMBLY LH


    1. Install the visor assembly with the 2 screws.

  13. INSTALL VISOR ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  14. INSTALL VISOR BRACKET COVER

    A001AZ4

    Tech Tips

    Use the same procedure to install the cover on the other side.


    1. Attach the 4 claws to install the visor bracket cover.

  15. INSTALL ASSIST GRIP SUB-ASSEMBLY

    A001AVG

    Tech Tips

    Use the same procedure for all the assist grips.


    1. Assemble the assist grip sub-assembly, 2 clips and 2 covers as shown in the illustration.

    2. Attach the 2 clips to install the assist grip sub-assembly.

  16. INSTALL COAT HOOK (w/o Rear Cooler)

    Tech Tips

    Use the same procedure to install the hook on the other side.


    1. Install the coat hook with the screw.

  17. INSTALL ROOF SIDE REGISTER BEZEL LH (w/ Rear Cooler)


    1. Attach the claw to install the roof side register bezel LH.

    2. Install the screw.

  18. INSTALL ROOF SIDE REGISTER BEZEL RH (w/ Rear Cooler)

    Tech Tips

    Use the same procedure described for the LH side.

  19. INSTALL REAR VANITY LIGHT ASSEMBLY

    Tech Tips

    Use the same procedure to install the vanity light assembly on the other side.


    1. Connect the connector.

    2. Attach the claw to install the vanity light assembly.

    3. Install the 2 screws.

    4. Attach the 4 claws to install the lens.

      A001CMZ

  20. INSTALL ROOF CONSOLE BOX ASSEMBLY (w/ Rear Seat Entertainment System)


    1. w/o Sliding Roof:


      1. Connect the connector.

      2. Attach the 2 hooks, 6 clips and 2 claws to install the roof console box assembly.

      3. Install the 2 screws.

    2. w/ Sliding Roof:


      1. Connect the connector.

      2. Attach the 2 hooks and 6 clips to install the roof console box assembly.

      3. Install the 2 screws.

  21. INSTALL SPOT LIGHT LENS (w/ Rear Seat Entertainment System)


    1. Attach the 4 claws to install the spot light lens.

  22. INSTALL SPOT LIGHT ASSEMBLY (w/o Rear Seat Entertainment System)


    1. Connect the connector.

    2. A0019FL

      Attach the 4 claws to install the spot light assembly.

  23. INSTALL MAP LIGHT ASSEMBLY


    1. Connect the 2 connectors.

    2. Attach the 2 clips to install the map light assembly.

    3. Install the 2 screws.

    4. Attach the 2 claws to close the 2 covers.

      A001CZ3

  24. INSTALL INNER ROOF SIDE GARNISH LH

    A001EDNE06
    Text in Illustration
    *1 Clip A

    1. Install a new clip A to the inner roof side garnish LH.

    2. Attach the 2 claws and 5 clips to install the inner roof side garnish LH.

  25. INSTALL INNER ROOF SIDE GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  26. INSTALL REAR SEAT SIDE GARNISH LH


    1. Attach the 6 claws to install the rear seat side garnish LH.

  27. INSTALL REAR SEAT SIDE GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  28. INSTALL SHOULDER BELT ANCHOR COVER LH

    A001C8N

    1. Slide the shoulder belt anchor cover LH in the direction shown in the illustration and attach the 6 claws to install it.

  29. INSTALL SHOULDER BELT ANCHOR COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  30. INSTALL CENTER UPPER PILLAR GARNISH LH

    A001BV8

    1. Pass the front seat outer belt floor anchor through the center upper pillar garnish LH.

    2. Attach the guide and claw to install the center upper pillar garnish LH.

    3. Install the 2 screws.

  31. INSTALL CENTER UPPER PILLAR GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  32. INSTALL CENTER LOWER PILLAR GARNISH LH

    A001DNQ

    1. Attach the 2 claws and 6 clips to install the center lower pillar garnish LH.

  33. INSTALL CENTER LOWER PILLAR GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  34. INSTALL REAR DOOR SCUFF PLATE LH

    A001A9W

    1. Attach the 3 clips.

    2. Attach the 7 claws to install the rear door scuff plate LH.

  35. INSTALL REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure described for the LH side.

  36. INSTALL FRONT PILLAR GARNISH LH


    1. Install new front pillar garnish clips to the front pillar garnish.

      Tech Tips

      Install the front pillar garnish clips so that it faces as shown in the illustration.

      A001COAE01
      Text in Illustration
      *a CORRECT *b INCORRECT
    2. A001CEY

      Attach the guide.

    3. A001FB1E01
      Text in Illustration
      *1 Front Pillar Garnish Clip

      Attach the 2 clips to install the front pillar garnish LH.

      Note

      After installing the front pillar garnish LH, make sure that the lip of the front door opening trim weatherstrip LH is not pinched.

  37. INSTALL FRONT PILLAR GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  38. INSTALL COWL SIDE TRIM BOARD LH


    1. Attach the 3 claws to install the cowl side trim board LH.

  39. INSTALL COWL SIDE TRIM BOARD RH

    Tech Tips

    Use the same procedure described for the LH side.

  40. INSTALL FRONT DOOR SCUFF PLATE LH

    A0019KL

    1. Attach the 4 clips.

    2. Attach the 7 claws to install the front door scuff plate LH.

  41. INSTALL FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure described for the LH side.

  42. INSTALL REAR SEAT ASSEMBLY (for Fixed Type)

    Click here

  43. INSTALL REAR SEAT ASSEMBLY (for Power Seat)

    Click here

  44. INSTALL FRONT SEAT ASSEMBLY

    Click here

  45. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  46. CHECK SRS WARNING LIGHT

    Click here

  47. ADJUST OBJECT RECOGNITION CAMERA (w/ Lane Keeping Assist System)

    Click here

  48. INSTALL COWL TOP VENTILATOR LOUVER

    Click here