RADIO ANTENNA CORD INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL NO. 3 ANTENNA CORD SUB-ASSEMBLY

   
   

   1. Attach the 6 clamps and install the No. 3 antenna cord sub-assembly.

      

   2. Connect each connector.

      Text in Illustration

      *a

      w/ Digital Audio Broadcasting

      -

      -

2. INSTALL ROOF HEADLINING ASSEMBLY

   
   

   1. for Standard Body:

      Click here

   2. for Long Body:

      Click here

3. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY

   
   

   1. for Long Body:

      

      
      

      1. Attach the 13 clamps.

      2. Install the 2 bolts.

         Torque:

         8.4 N*m  { 86 kgf*cm, 74 in.*lbf }

      3. Connect each connector and install the No. 2 antenna cord sub-assembly.

   2. for Standard Body:

      

      
      

      1. Attach the 12 clamps.

      2. Install the 2 bolts.

         Torque:

         8.4 N*m  { 86 kgf*cm, 74 in.*lbf }

      3. Connect each connector and install the No. 2 antenna cord sub-assembly.

4. INSTALL ROOF SIDE GARNISH INNER RH

   Click here

5. INSTALL REAR SEAT ASSEMBLY

   
   

   1. for Power Seat:

      Click here

   2. for 4-Passenger with Ottoman:

      Click here

   3. for 5-Passenger with Ottoman:

      Click here

   4. for Fixed Seat:

      Click here

6. INSTALL FRONT SEAT ASSEMBLY RH

   Click here

7. INSTALL FRONT CONSOLE BOX ASSEMBLY

   
   

   1. w/o Rear Entertainment System:

      Click here

   2. for 5-Passenger with Ottoman:

      Click here

   3. w/ Disc Player:

      Click here

8. INSTALL ANTENNA CORD SUB-ASSEMBLY

   
   

   1. Attach the 2 clamps to install the antenna cord sub-assembly.

      

   2. Connect each connector.

9. INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY

   Click here

10. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

11. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click here

12. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

    Click here

13. INSTALL UPPER INSTRUMENT CLUSTER FINISH PANEL

    Click here

14. INSTALL UPPER REAR CONSOLE PANEL SUB-ASSEMBLY

    Click here

15. INSTALL NO. 3 BOX PANEL

    Click here

16. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

17. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

    Click here

18. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

    Click here

19. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

20. INSTALL COWL TOP VENTILATOR LOUVER RH

    Click here