PILLAR SPEAKER(for Quarter) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL REAR HEADER SPEAKER ASSEMBLY (for 19 Speakers)

    Note

    Do not touch the cone of the speaker.


    1. Connect the connector.

    2. A001AHDE01

      Install the rear header speaker assembly and attach the clip.

    3. Install the 2 bolts.

  2. INSTALL INNER ROOF SIDE GARNISH LH

    Click here

  3. INSTALL REAR SEAT SIDE GARNISH LH

    Click here

  4. INSTALL REAR SEAT ASSEMBLY


    1. for Power Seat:

      Click here

    2. for Ottoman Seat:

      Click here

    3. for fixed Seat:

      Click here

  5. INSTALL REAR DOOR SCUFF PLATE LH


    1. for Standard Body:

      Click here

    2. for Long Body:

      Click here

  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  7. INSTALL COWL TOP VENTILATOR LOUVER RH

    Click here

  8. CHECK SRS WARNING LIGHT

    Click here