ECM INSTALLATION


  1. INSTALL ECM

    A01BBI1E05

    1. Install the ECM cover with the 4 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Insert the 4 ECM connectors to the ECM.

    3. A01BH8XE02

      Temporarily install the ECM with the ECM cover onto the clamp.

    4. Install the ECM together with the ECM cover with the 2 clips.

      Note

      Do not use an ECM that was dropped or received strong impact.

    5. Install the floor carpet.

  2. INSTALL FRONT SEAT ASSEMBLY RH


    1. Perform the same procedure as described for the opposite side. Click here

  3. INSTALL FRONT DOOR SCUFF PLATE RH

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Torque:
    5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  5. REGISTER ID CODE

    Click here

  6. CHECK ID CODE

    Click here

  7. INITIALIZE THE LEARNING VALUE OF THE SUPPLY PUMP ASSEMBLY


    1. Perform initialization procedures Click here.

      Note

      Certain systems need to be initialized after reconnecting the cable to the negative (-) battery terminal.

  8. PERFORM INITIALIZATION


    1. Perform initialization procedures Click here.

      Note

      Certain systems need to be initialized after reconnecting the cable to the negative (-) battery terminal.