Click here

FRONT BUMPER(for Sport Package) INSTALLATION

Click here
Click here

CAUTION / NOTICE / HINT

Tip:

When the front bumper is damaged or deformed due to an accident or contact with other objects, etc., or the bumper installation area on the body is repaired, it is necessary to perform millimeter wave radar sensor adjustment.

Click here

Click here

PROCEDURE


  1. Click here

    INSTALL FRONT BUMPER ASSEMBLY


    1. B004RBFC01
      B004RMI Install in this Direction

      w/ Headlight Cleaner System:


      1. Connect the headlight cleaner hose.

    2. Attach the claw to temporarily install the front bumper assembly.

      Note:

      Do not damage the front bumper assembly.

    3. B004VHJC01
      B004RMI Install in this Direction

      Attach the guide, claw and clip to install the front bumper assembly as shown in the illustration.

      Tip:

      Use the same procedure for the RH and LH side.

    4. Remove the protective tape.

    5. B004S3B

      Connect the 2 connectors

    6. B004S9Y

      Install the 8 screws.

    7. B004WQGC01
      *1 Front Bumper Seal Bracket

      Install the front bumper seal bracket.

      Tip:

      Use the same procedure for the RH and LH side.

    8. Install the screw.

      Tip:

      Use the same procedure for the RH and LH side.

    9. B004YAT

      Install the 4 clips.

      Tip:

      Use the same procedure for the RH and LH side.

    10. B004U0X

      Install the 3 bolts.

  2. Click here

    INSTALL LOWER RADIATOR AIR DEFLECTOR

    Click here

  3. Click here

    INSTALL RADIATOR COVER PLATE

    Click here

  4. Click here

    INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here

  5. Click here

    CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  6. Click here

    INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here

  7. Click here

    PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here

  8. Click here

    CHECK SRS WARNING LIGHT

    Click here

  9. Click here

    ADD WINDSHIELD WASHER FLUID (w/ Headlight Cleaner System)


    1. Add washer fluid to the washer jar.

  10. Click here

    ADJUST HEADLIGHT AIMING

    Click here

  11. Click here

    INITIALIZATION GRILLE SHUTTER SYSTEM (w/ Grille Shutter)


    1. Change the grille shutter control mode to normal mode and initialize the grille shutter system.

      Click here

  12. Click here

    ADJUST FRONT TELEVISION CAMERA ASSEMBLY

    Click here

  13. Click here

    PERFORM CALIBRATION

    Click here