PROCEDURE
INSTALL LUGGAGE COMPARTMENT DOOR CUSHION
Attach the claw and install the luggage compartment door cushion.
Use the same procedure for the RH and LH sides.
INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER LH
Install the luggage compartment door hinge cover LH with the 4 clips.
INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER RH
Use the same procedure for the RH and LH sides.
INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER
Install in this Direction (1) | Install in this Direction (2) |
While bending the rear luggage compartment trim cover toward the inside of the vehicle, install it to the luggage compartment.
Do not bend the rear luggage compartment trim cover so far that it breaks.
Install in this Direction | |
Push |
Push the lever in the direction of the arrow shown in the illustration and install the rope hook.
Use the same procedure for the opposite side.
Install the rear luggage compartment trim cover with the 6 clips.
INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear Air Conditioning System)
Install in this Direction (1) | Install in this Direction (2) |
While bending the front luggage compartment trim cover toward the inside of the vehicle, install it to the luggage compartment.
Do not bend the front luggage compartment trim cover so far that it breaks.
Install the front luggage compartment trim cover with the 6 clips.
INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/ Rear Air Conditioning System)
Use the same procedure described for the front luggage compartment trim cover (w/o Rear Air Conditioning System).
INSTALL INNER LOWER LUGGAGE COMPARTMENT TRIM COVER
Install the inner lower luggage compartment trim cover with the 8 clips.
Install the inner lower luggage compartment trim cover so that its edge is not folded between the auxiliary battery and body.
INSTALL TOOL BOX
Install in this Direction |
Install the tool box.
Make sure there are no gaps or looseness.
If there are gaps from the installation of the tool box, the luggage compartment mat sub-assembly cannot be neatly installed.
INSTALL LUGGAGE COMPARTMENT TRIM COVER LH
Install in this Direction |
Attach the pin and install the luggage compartment trim cover LH as shown in the illustration.
INSTALL LUGGAGE COMPARTMENT TRIM COVER RH
Install in this Direction |
Attach the pin and install the luggage compartment trim cover RH as shown in the illustration.
INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY
Install in this Direction |
Install the luggage compartment mat sub-assembly as shown in the illustration.
INSTALL LUGGAGE COMPARTMENT FLOOR MAT
Install in this Direction |
Install the luggage compartment floor mat as shown in the illustration.
INSTALL LICENSE PLATE LIGHT ASSEMBLY
INSTALL LUGGAGE ELECTRICAL KEY SWITCH
INSTALL TELEVISION CAMERA ASSEMBLY
INSTALL REAR LUGGAGE TRIM CLIP
Attach the claw and install the rear luggage trim clip.
Use the same procedure for the RH and LH sides.
INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY
INSTALL UPPER LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH LH
INSTALL UPPER LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH RH
Use the same procedure for the RH and LH sides.
INSTALL REAR LIGHT ASSEMBLY LH
INSTALL REAR LIGHT ASSEMBLY RH
Use the same procedure for the RH and LH sides.
INSTALL LUGGAGE DOOR LOCK CONTROL CABLE SUB-ASSEMBLY
Install the luggage door lock control cable sub-assembly to the luggage compartment door lock cylinder assembly.
INSTALL LUGGAGE COMPARTMENT KEY CYLINDER PROTECTOR
Install the luggage compartment key cylinder protector with the nut.
5.5 N*m | 56 kgf*cm | 49 in.*lbf |
INSTALL LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY
Pull |
Pull the luggage door lock control cable sub-assembly into the luggage compartment door panel as shown in the illustration.
Attach the clamp.
Install the luggage compartment door lock cylinder assembly with the 2 nuts.
5.5 N*m | 56 kgf*cm | 49 in.*lbf |
INSTALL LUGGAGE DOOR CLOSER ASSEMBLY
INSTALL DOOR CONTROL SWITCH
INSTALL LUGGAGE COMPARTMENT DOOR COVER
Attach the clip and install the luggage compartment door cover.
Install the clip.
INSTALL NO. 2 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
INSTALL SWITCH BEZEL
Attach the claw and install the switch bezel.
INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP
Install the luggage compartment door assist grip with the 2 screws.
Attach the claw and close the cover.
INITIALIZE POWER TRUNK LID CONTROL SYSTEM
CHECK POWER TRUNK LID CONTROL SYSTEM
ADJUST REAR TELEVISION CAMERA ASSEMBLY
w/ Parking Assist Monitor System:
w/ Panoramic View Monitor System: