VEHICLE APPROACHING SPEAKER REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are installed, removed or replaced during the vehicle approaching speaker assembly removal/installation are shown below.

Necessary procedure after parts removed/installed/replaced
Replacement Part or Procedure Necessary Procedures Effects/Inoperative Functions when not Performed Link
Front bumper assembly (Including removal and installation)

  • Ultrasonic sensor detection angle

  • Ultrasonic sensor detection angle registration

 Parking support brake system

Click here

Front television camera view adjustment Panoramic view monitor system

Click here

PROCEDURE


  1. REMOVE FRONT BUMPER ASSEMBLY


    1. for Sport Package:

      Click here

    2. except Sport Package:

      Click here

  2. REMOVE VEHICLE APPROACHING SPEAKER ASSEMBLY


    1. B004U50C01
      *a Guide
      *b Wire Harness Clamp
      B004SZX Nut
      B004UK4 Connector

      Remove the nut.

    2. Detach the guide, wire harness clamp and remove the vehicle approaching speaker assembly.

    3. Disconnect the connector.

      Note


      • When removing the vehicle approaching speaker, take care not to damage it.

      • Do not reuse a vehicle approaching speaker that has been dropped or subjected to a strong shock.