Click here

AIRBAG SYSTEM, Diagnostic DTC:B1630, B1632

Click here
Click here Click here
DTC Code DTC Name
B1630 Curtain Shield Airbag Sensor (RH)
B1632 Curtain Shield Airbag Sensor Lost Communication (RH)
Click here

DESCRIPTION

The rear airbag sensor LH or RH consists of a lateral deceleration sensor, etc.

If the airbag ECU assembly receives signals from the lateral deceleration sensor, it determines whether the SRS should be activated.

DTC B1630 or B1632 is stored when a malfunction is detected in the rear airbag sensor LH or RH circuit.

DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Test Mode / Check Mode
B1630 Curtain Shield Airbag Sensor (RH)

Either condition is met:


  • A rear airbag sensor RH malfunction.

  • An airbag ECU assembly malfunction.

  • Rear airbag sensor RH

  • Airbag ECU assembly

 Comes on Not applicable
B1632 Curtain Shield Airbag Sensor Lost Communication (RH)

Either condition is met:


  • A rear airbag sensor RH malfunction.

  • An airbag ECU assembly malfunction.

  • Rear airbag sensor RH

  • Airbag ECU assembly

 Comes on Not applicable
Table 1. *a Rear Airbag Sensor RH *b Door Side Airbag Sensor RH *c Side Airbag Sensor Assembly RH *d Airbag ECU Assembly
Click here

WIRING DIAGRAM

Click here

CAUTION / NOTICE / HINT

Note:

  • After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.

    Click here

  • When disconnecting the cable from the negative (-) auxiliary battery terminal while performing repairs, some systems need to be initialized after the cable is reconnected.

    Click here

Click here

PROCEDURE


  1. Click here

    CHECK DTC


    1. Turn the power switch on (IG), and wait for at least 60 seconds.

    2. Clear the DTCs stored in memory.

      Click here


      1. Body Electrical > SRS Airbag > Clear DTCs


    3. Turn the power switch off.

    4. Turn the power switch on (IG), and wait for at least 60 seconds.

    5. Check for DTCs.

      Click here


      1. Body Electrical > SRS Airbag > Trouble Codes


      Result
      Proceed to
      DTC B1630 or B1632 is output
      DTC B1630 and B1632 are not output
      Tip:

      Codes other than DTC B1630 and B1632 may be output at this time, but they are not related to this check.


    • DTC B1630 or B1632 is outputClick here
    • DTC B1630 and B1632 are not output

      USE SIMULATION METHOD TO CHECKClick here

  2. Click here

    CHECK REAR AIRBAG SENSOR RH


    1. B004SY8C31
      *1 Rear Airbag Sensor LH
      *2 Airbag ECU Assembly

      Turn the power switch off.

    2. Disconnect the cable from the negative (-) auxiliary battery terminal, and wait for at least 90 seconds.

    3. Interchange the rear airbag sensor RH with LH and connect the connectors to them.

    4. Connect the cable to the negative (-) auxiliary battery terminal, and wait for at least 2 seconds.

    5. Turn the power switch on (IG), and wait for at least 60 seconds.

    6. Clear the DTCs stored in memory.

      Click here


      1. Body Electrical > SRS Airbag > Clear DTCs


    7. Turn the power switch off.

    8. Turn the power switch on (IG), and wait for at least 60 seconds.

    9. Check for DTCs.

      Click here


      1. Body Electrical > SRS Airbag > Trouble Codes


      Result
      Proceed to
      DTC B1635 or B1637 is output
      DTC B1630 or B1632 is output
      DTC B1630, B1632, B1635 and B1637 are not output
      Tip:

      Codes other than DTC B1630, B1632, B1635 and B1637 may be output at this time, but they are not related to this check.

    10. Turn the power switch off.

    11. Disconnect the cable from the negative (-) auxiliary battery terminal, and wait for at least 90 seconds.

    12. Return the rear airbag sensor LH and RH to their original positions and connect the connectors to them.


    • DTC B1635 or B1637 is output

      REPLACE REAR AIRBAG SENSOR RHClick here

    • DTC B1630 or B1632 is output

      REPLACE AIRBAG ECU ASSEMBLYClick here

    • DTC B1630, B1632, B1635 and B1637 are not output

      USE SIMULATION METHOD TO CHECKClick here