OPERATION FLOW
Tech Tips
Perform troubleshooting in accordance with the procedure below. The following is an outline of basic troubleshooting procedure. Confirm the troubleshooting procedure for the circuit you are working on before beginning troubleshooting.
1.VEHICLE BROUGHT TO WORKSHOP
2.CUSTOMER PROBLEM ANALYSIS
Ask the customer about the conditions and environment when the problem occurred.
INSPECT AUXILIARY BATTERY VOLTAGE
Measure the auxiliary battery voltage.
If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding to the next step.
4.SYMPTOM CONFIRMATION AND DTC (AND FREEZE FRAME DATA) CHECK
Visually check the wire harnesses, connectors and fuses for open and short circuits.
Warm up the engine to the normal operating temperature.
Confirm the problem symptoms and conditions, and check for DTCs.
5.DTC CHART
Find the output DTC in the DTC chart. Look at the Trouble Area column for a list of potentially malfunctioning circuits and/or parts.
6.PROBLEM SYMPTOMS CHART
Find the problem symptoms in the problem symptoms table. Look at the Suspected Area column for a list of potentially malfunctioning circuits and/or parts.
7.CIRCUIT INSPECTION OR PARTS INSPECTION
Identify the malfunctioning circuit or part.
8.ADJUST, REPAIR OR REPLACE
Adjust, repair or replace the malfunctioning circuit or parts.
9.CONFIRMATION TEST
After the adjustment, repairs or replacement of components, confirm that the malfunction no longer exists. If the malfunction does not recur, perform a confirmation test under the same conditions and in the same environment as when the malfunction first occurred.
END
CUSTOMER PROBLEM ANALYSIS
Tech Tips
When troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.
Gather as much information as possible for reference. Past problems that seem unrelated may also help in some cases.
The following 5 items are important points for problem analysis:
What | Vehicle model, system name |
When | Date, time, occurrence frequency |
Where | Road conditions |
Under what conditions? | Driving conditions, weather conditions |
How did it happen? | Problem symptoms |
SYMPTOM CONFIRMATION AND DIAGNOSTIC TROUBLE CODE
Tech Tips
The diagnostic system in this vehicle has various functions.
The first function is the Diagnostic Trouble Code (DTC) check. A DTC is a code stored in the ECU memory whenever a malfunction in the signal circuits to the ECU occurs. In a DTC check, DTCs stored by a previous malfunction can be checked by a technician during troubleshooting.
Another function is the Input Signal Check, which checks if the signals from various switches are sent to the ECU correctly.
By using these functions, the problem areas can be narrowed down and troubleshooting can be more effective. Diagnostic functions are incorporated in the following systems of this vehicle.
System | Symptom Confirmation and Diagnostic Trouble Code | ||||||
---|---|---|---|---|---|---|---|
DTC Check (Normal Mode) |
DTC Check (Check Mode) |
Freeze Frame Data | Sensor Check/Test Mode (Input Signal Check) | Data List | Active Test | Customize Parameter | |
SFI System (w/ Canister Pump Module) | ○ | ○ | ○ | - | ○ | ○ | - |
SFI System (w/o Canister Pump Module) | ○ | ○ | ○ | - | ○ | ○ | - |
Ignition System | - | - | - | - | - | - | - |
Hybrid Control System | ○ | ○ | ○ | - | ○ | ○ | ○ |
Motor Generator Control System | ○ | - | ○ | - | ○ | - | - |
Hybrid Battery System | ○ | ○ | ○ | - | ○ | ○ | - |
Fuel System | - | - | - | - | - | - | - |
Emission Control System | - | - | - | - | - | - | - |
Intake System | - | - | - | - | - | - | - |
Cooling Fan System | - | - | - | - | - | - | - |
Cruise Control System | ○ | - | ○ | - | ○ | ○ | - |
Dynamic Radar Cruise Control System (for Stereo Camera Type) | ○ | - | ○ | - | ○ | ○ | - |
Dynamic Radar Cruise Control System (for Mono Camera Type) | ○ | - | ○ | - | ○ | ○ | - |
Front Camera System (for Stereo Camera Type) | ○ | - | ○ | - | ○ | - | - |
Front Camera System (for Mono Camera Type) | ○ | - | ○ | - | ○ | ○ | - |
LKA/LDA System (for Mono Camera Type) | ○ | - | ○ | - | ○ | ○ | ○ |
Lane Control System (for Stereo Camera Type) | ○ | - | ○ | - | ○ | ○ | ○ |
Road Sign Assist System (for Stereo Camera Type) | ○ | - | - | - | ○ | - | ○ |
Road Sign Assist System (for Mono Camera Type) | ○ | - | - | - | ○ | ○ | ○ |
Front Radar Sensor System (for Stereo Camera Type) | ○ | - | ○ | - | ○ | - | - |
Front Side Radar Sensor System (for Stereo Camera Type) | ○ | - | ○ | - | ○ | - | - |
Hybrid Transmission System (L310) | - | - | - | - | - | - | - |
Electronic Shift Lever System (L310) | ○ | - | ○ | - | ○ | - | - |
Hybrid Transmission System (L310F) | - | - | - | - | - | - | - |
Electronic Shift Lever System (L310F) | ○ | - | ○ | - | ○ | - | - |
Air Suspension System | ○ | - | ○ | - | ○ | ○ | ○ |
Adaptive Variable Suspension System | ○ | - | ○ | ○ | ○ | ○ | ○ |
Tire Pressure Warning System | ○ | - | - | ○ | ○ | ○ | - |
Electronically Controlled Brake System | ○ | - | ○ | ○ | ○ | ○ | - |
Electric Parking Brake System | ○ | - | ○ | - | ○ | ○ | - |
Power Steering System | ○ | - | ○ | - | ○ | - | - |
Variable Gear Ratio Steering | ○ | - | ○ | ○ | ○ | - | - |
Dynamic Rear Steering System | ○ | - | ○ | ○ | ○ | - | - |
Power Tilt and Power Telescopic Steering Column System | ○ | - | ○ | - | ○ | ○ | ○ |
Heated Steering Wheel System | ○ | - | - | - | ○ | ○ | ○ |
Audio and Visual system | ○ | - | ○ | - | ○ | - | ○ |
Active Noise Control System | ○ | - | ○ | - | ○ | ○ | - |
Rear Seat Entertainment System | ○ | - | - | - | - | - | - |
Navigation System | ○ | - | ○ | - | ○ | - | ○ |
Telematics System (for G-BOOK) | ○ | - | - | - | - | - | - |
Parking Assist Monitor System | ○ | - | - | - | ○ | ○ | - |
Parking Support Alert System | ○ | - | - | - | ○ | ○ | ○ |
Parking Support Brake System | ○ | - | - | - | ○ | ○ | ○ |
Blind Spot Monitor System | ○ | - | ○ | - | ○ | ○ | ○ |
Panoramic View Monitor System | ○ | - | - | - | ○ | - | - |
Garage Door Opener System | - | - | - | - | - | - | - |
Charging System | ○ | - | ○ | - | ○ | ○ | - |
Sub Battery system | ○ | - | ○ | - | ○ | ○ | - |
Power Integration System | ○ | - | - | - | ○ | - | - |
LIN Communication System | ○ | - | - | - | ○ | - | - |
CXPI Communication System | ○ | - | - | - | ○ | - | - |
CAN Communication System | ○ | - | - | - | ○ | - | - |
Power Door Lock Control System | ○ | - | - | - | ○ | ○ | ○ |
Wireless Door Lock Control System | ○ | - | - | - | ○ | ○ | ○ |
Entry and Start System (for Entry Function) | ○ | - | - | - | ○ | ○ | ○ |
Entry and Start System Start (for Start Function) | ○ | - | - | - | ○ | ○ | ○ |
Theft Deterrent System | ○ | - | - | - | ○ | ○ | ○ |
Lighting System (INT) | - | - | - | - | ○ | ○ | ○ |
Meter / Gauge System | ○ | - | - | - | ○ | ○ | ○ |
Clock System | - | - | - | - | - | - | ○ |
Headup Display System | ○ | - | - | - | ○ | ○ | ○ |
Airbag System | ○ | ○ | - | - | ○ | - | - |
Pedestrian Protection System | ○ | - | - | - | ○ | - | - |
Occupant Classification System | ○ | - | - | - | ○ | - | - |
Pre-collision System (for Stereo Camera Type) | ○ | - | ○ | - | ○ | ○ | ○ |
Pre-collision System (for Mono Camera Type) | ○ | - | ○ | - | ○ | ○ | ○ |
Front Power Seat Control System | ○ | - | - | - | ○ | ○ | ○ |
Rear Power Seat Control System | ○ | - | - | - | ○ | ○ | ○ |
Seat Heater System | ○ | - | - | - | ○ | ○ | ○ |
Climate Control Seat System | - | - | - | - | - | - | ○ |
Seat Vibration System | - | - | - | - | ○ | ○ | ○ |
Seat Belt Tension Reducer System | - | - | - | - | - | - | - |
Seat Belt Warning System (w/ Occupant Classification System) | - | - | - | - | ○ | ○ | ○ |
Seat Belt Warning System (w/o Occupant Classification System) | - | - | - | - | ○ | ○ | ○ |
Easy Access Buckle System | ○ | - | - | - | ○ | ○ | ○ |
Seat Belt System | ○ | - | - | - | ○ | ○ | ○ |
Air Conditioning System | ○ | - | - | - | ○ | ○ | ○ |
Rear Door Sunshade System | - | - | - | - | ○ | ○ | ○ |
Rear Sunshade System | - | - | - | - | ○ | ○ | ○ |
Rear Multi Operation Panel System | ○ | - | - | - | ○ | ○ | - |
Power Window Control System | ○ | - | - | - | ○ | ○ | ○ |
Windshield Deicer System | - | - | - | - | - | ○ | - |
Window Defogger System | - | - | - | - | - | ○ | - |
Sliding Roof System | ○ | - | - | - | ○ | ○ | ○ |
Door Closer System | - | - | - | - | ○ | - | - |
Fuel Lid Opener System (w/ Canister Pump Module) | - | - | - | - | ○ | ○ | - |
Fuel Lid Opener System (w/o Canister Pump Module) | - | - | - | - | - | - | - |
Power Trunk Lid System | ○ | - | - | - | ○ | ○ | ○ |
Power Mirror Control System | ○ | - | - | - | ○ | ○ | ○ |
Wiper and Washer System | ○ | - | ○ | - | ○ | ○ | ○ |
Lighting System (EXT) | ○ | - | ○ | - | ○ | ○ | ○ |
Horn System | - | - | - | - | - | - | - |
Vehicle Proximity Notification System | ○ | - | - | - | ○ | ○ | ○ |
In the DTC check, it is very important to determine whether the problem indicated by the DTC either: 1) still occurs, or 2) occurred in the past but has returned to normal. In addition, the DTC should be compared to the problem symptom to see if they are related. For this reason, DTCs should be checked before and after confirmation of symptoms (i.e., whether or not problem symptoms exist) to determine current system conditions, as shown in the flowchart below.
Never skip the DTC check. Failing to check for DTCs, depending on the case, may result in unnecessary troubleshooting for systems operating normally or lead to repairs not related to the problem. Follow the procedure listed in the flowchart in the correct order.
The following flowchart shows how to proceed with troubleshooting using the DTC check. Directions from the flowchart will indicate how to proceed either to DTC troubleshooting or to the troubleshooting of each problem symptom.
1.DTC CHECK
2.MAKE A NOTE OF DTC DISPLAYED AND THEN CLEAR DTCs
3.SYMPTOM CONFIRMATION
4.SIMULATION TEST USING SYMPTOM SIMULATION METHODS
5.DTC CHECK
6.SYMPTOM CONFIRMATION
If a DTC was displayed in the initial DTC check, the problem may have occurred in a wire harness or connector in that circuit in the past. Check the wire harness and connectors.
SYMPTOM SIMULATION
Tech Tips
The most difficult case in troubleshooting is when no problem symptoms occur. In such a case, a thorough problem analysis must be carried out. A simulation of the same or similar conditions and environment in which the problem occurred in the customer's vehicle should be carried out. No matter how much skill or experience a technician has, troubleshooting without confirming the problem symptoms will lead to important repairs being overlooked and mistakes or delays.
*a | Vibrate Slightly |
*b | Shake Slightly |
VIBRATION METHOD: When a malfunction seems to occur as a result of vibration.
PARTS OR SENSORS
Apply slight vibration with a finger to the part or sensor suspected to be the cause of the problem, and check whether the malfunction occurs.
Note
Applying strong vibration to relays may open the relays.
CONNECTORS
Slightly shake the connector vertically and horizontally.
WIRE HARNESS
Slightly shake the wire harness vertically and horizontally.
Tech Tips
The connector joint and fulcrum of the vibration are the major areas that should be checked thoroughly.
HEAT METHOD: When a malfunction seems to occur when the area in question is heated.
Heat the component that is the possible cause of the malfunction with a hair dryer or similar device. Check if the malfunction occurs.
Note
Do not heat components to more than 60°C (140°F). Exceeding this temperature may damage the components.
Do not apply heat directly to parts in an ECU.
WATER SPRINKLING METHOD: When a malfunction seems to occur on a rainy day or in high-humidity.
Sprinkle water onto the vehicle and check if the malfunction occurs.
Note
Never sprinkle water directly into the engine compartment. Indirectly change the temperature and humidity by spraying water onto the front of the radiator.
Never apply water directly onto the electronic components.
Tech Tips
If the vehicle has or had a water leak problem, the leak may have damaged the ECU or connections. Look for evidence of corrosion or short circuits. Proceed with caution during water tests.
HIGH ELECTRICAL LOAD METHOD: When a malfunction seems to occur when the electrical load is high.
Turn on the heater blower, headlights, rear window defogger and all other electrical loads. Check if the malfunction recurs.
DIAGNOSTIC TROUBLE CODE CHART
Look for output Diagnostic Trouble Codes (DTCs) (from the DTC checks) in the Diagnostic Trouble Code chart of the appropriate section. Use the chart to determine the trouble area and the proper inspection procedure. A description of each of the columns of the chart is shown in the table below.
Item | Description |
---|---|
DTC No. | Indicates the diagnostic trouble code. |
Detection Item | Indicates the system or details of the problem. |
DTC Detection Condition | Indicates the condition in which a DTC is stored. |
Trouble Area | Indicates the suspected areas of the problem. |
Link | Indicates the page where the inspection procedure for each circuit is to be found, or gives instruction for checking and repairs. |
PROBLEM SYMPTOMS TABLE
When no DTC is output but the problem still occurs, use the Problem Symptoms Table. The suspected areas (circuits or parts) for each problem symptom are shown in the table. The suspected areas are listed in order of probability. A description of each of the table columns is shown in the following table.
Tech Tips
In some cases, the problem is not detected by the diagnostic system even though a problem symptom occurs. It is possible that the problem occurs outside the detection range of the diagnostic system, or that the problem occurs in a completely different system.
Item | Description |
---|---|
Symptom | - |
Suspected Area | Indicates the circuit or part which needs to be checked. |
Link | Indicates the page where the inspection procedure is located. |
INSPECTION
A description of the main points for inspection of suspected areas is shown in the following table.
Item | Description |
---|---|
Description | Explains the major role and operation of the circuit or system and its component parts. |
DTC No., DTC Detection Condition and Trouble Area | Indicates the diagnostic trouble codes, DTC detection conditions and suspected areas for a problem. |
Wiring Diagram | Indicates a wiring diagram for the circuit or system. This diagram can be used together with the Electrical Wiring Diagram to thoroughly understand the circuit. Wire colors are indicated by alphabetical codes. B = Black, L = Blue, R = Red, BR = Brown, LG = Light Green, V = Violet, G = Green, O = Orange, W = White, GR = Gray, P = Pink, Y = Yellow, SB = Sky Blue The first letter indicates the basic wire color and the second letter indicates the color of the stripe. |
Procedure | Shows the procedure not only to determine whether the circuit is normal or abnormal, but also to determine whether the problem is located in the sensors, actuators, wire harness or ECU. |
Illustration of the ECU connector during the check | Shows whether the connector being checked is connected or disconnected. The connections for an electrical tester are indicated by (+) or (-) after the terminal name. For inspections between a connector and body ground, information about the ground is not shown in the illustration. |