PANORAMIC VIEW MONITOR SYSTEM, Diagnostic DTC:C164D

DESCRIPTION

This DTC are stored when the parking assist ECU receives a wheel speed sensor (front speed sensor RH or front speed sensor LH) abnormality signal from the vehicle stability control system via CAN communication.

PROCEDURE

1. CHECK FOR DTC

   
   

   1. Clear the DTCs.

      Click here

      
      Chassis > Panoramic View Monitor > Clear DTCs
      Chassis > Parking Assist Camera > Clear DTCs

   2. Check for DTCs.

      Click here

      
      Chassis > Panoramic View Monitor > Trouble Codes
      Chassis > Parking Assist Camera > Trouble Codes

      Result
      Result Proceed to No DTCs are output A DTC C164D is output ("Panoramic View Monitor") B DTC C164D is output ("Parking Assist Camera") C

      Tech Tips

      
      

      • The DTC is stored when a malfunction occurs in the vehicle stability control system.

      • If the parking assist ECU cannot read the stored information when activated, allowing the ECU to store the information again may return the system to normal.

      • If troubleshooting and repair of the malfunction in the vehicle stability control system have been completed, DTC C164D will not be output again when rechecking for DTCs.

      • If DTC C164D is stored frequently, duplicate the problem symptoms and perform the inspection again even if the DTC is not output when rechecking for DTCs.

        Click here

   
   

   A

   USE SIMULATION METHOD TO CHECK Click here

   B

   GO TO VEHICLE STABILITY CONTROL SYSTEM Click here

   C

   REPLACE REAR TELEVISION CAMERA ASSEMBLY Click here