DTC Code | DTC Name |
---|---|
HOW TO PROCEED WITH TROUBLESHOOTING |
PROCEDURE
VEHICLE BROUGHT TO WORKSHOP
Result | ||
---|---|---|
|
CUSTOMER PROBLEM ANALYSIS
Interview the customer and confirm the problem.
Result | ||
---|---|---|
|
CHECK DTC AND FREEZE FRAME DATA*
Check and record DTCs and Freeze Frame Data.
for DTC Check / Clear:Click here
for Freeze Frame Data:Click here
Clear the DTCs and Freeze Frame Data.
for DTC Check / Clear:Click here
for Freeze Frame Data:Click here
Reconfirm the DTCs.
Reconfirm the DTCs based on the recorded DTCs and Freeze Frame Data.
When CAN communication system DTCs are output, repair the CAN communication system first.
If DTCs U0123, U0124, U0126, U0151, and/or U0293 is output together with a CAN communication DTC, first check the appropriate sensor for a momentary open circuit.
If the GTS cannot communicate with the skid control ECU assembly, inspect the CAN communication system.
If there is no response from the skid control ECU assembly, inspect the IG1 circuit of the skid control ECU assembly.
Result | ||||||||
---|---|---|---|---|---|---|---|---|
|
GO TO STEP 6
DIAGNOSTIC TROUBLE CODE CHART
Proceed to Diagnostic Trouble Code Chart.
Result | ||
---|---|---|
|
GO TO STEP 7
SYMPTOM SIMULATION
Proceed to How to Proceed with Troubleshooting.
Result | ||
---|---|---|
|
PROBLEM SYMPTOMS TABLE
Proceed to Problem Symptoms Table.
Result | ||
---|---|---|
|
CIRCUIT INSPECTION*
Result | ||
---|---|---|
|
IDENTIFICATION OF PROBLEM
Result | ||
---|---|---|
|
REPAIR OR REPLACEMENT
Result | ||
---|---|---|
|
RECONFIRM DTC*
Clear the DTCs.
Check if the same DTCs are output.
Result | ||||||
---|---|---|---|---|---|---|
|
REPAIR CIRCUITS INDICATED BY OUTPUT DTCSClick here
CONFIRMATION TEST
Result | ||
---|---|---|
|
END