PANORAMIC VIEW MONITOR SYSTEM, Diagnostic DTC:C2A63

DTC Code DTC Name
C2A63 Back Camera Internal Circuit

DESCRIPTION

This DTC is stored when the parking assist ECU detects a signal indicating a malfunction in the rear television camera assembly via CAN communication.

DTC No. Detection Item DTC Detection Condition Trouble Area
C2A63 Back Camera Internal Circuit A signal indicating a malfunction in the rear television camera assembly RH is detected. Rear television camera assembly

CAUTION / NOTICE / HINT

Note


  • When "!" mark is displayed on the multi-display assembly after the cable is disconnected from the negative (-) auxiliary battery terminal, correct the steering angle neutral point.

    Click here

  • Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the panoramic view monitor system may be needed.

    Click here

PROCEDURE


  1. CHECK FOR DTC


    1. Clear the DTCs.

      Click here


      Chassis > Panoramic View Monitor > Clear DTCs

    2. Check for DTCs.

      Click here


      Chassis > Panoramic View Monitor > Trouble Codes
      OK
      DTC C2A63 is not output.
      Result
      Proceed to
      OK
      NG

    OK

    USE SIMULATION METHOD TO CHECK Click here

    NG

    REPLACE REAR TELEVISION CAMERA ASSEMBLY Click here