PANORAMIC VIEW MONITOR SYSTEM, Diagnostic DTC:C2A5C

DTC Code DTC Name
C2A5C BSM Buzzer Sound Request Signal Malfunction

DESCRIPTION

This DTC is stored when the rear television camera assembly receives an invalid communication signal from the blind spot monitor sensor RH.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
C2A5C BSM Buzzer Sound Request Signal Malfunction An invalid communication signal is received from the blind spot monitor sensor RH Rear television camera assembly Rear television camera assembly

CAUTION / NOTICE / HINT

Note


  • When "!" is displayed on the radio and display receiver assembly after the cable is disconnected from the negative (-) battery terminal, correct the steering angle neutral point.

    Click here

  • Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the panoramic view monitor system may be needed.

    Click here

PROCEDURE


  1. CHECK FOR DTC


    1. Clear the DTCs.


      Chassis > Parking Assist Camera > Clear DTCs

    2. Recheck for DTCs and check that no DTCs are output.


      Chassis > Parking Assist Camera > Trouble Codes
      Result
      Result Proceed to
      DTC C2A5C is output A
      DTC C2A5C is not output B

    A

    REPLACE REAR TELEVISION CAMERA ASSEMBLY Click here

    B

    USE SIMULATION METHOD TO CHECK Click here