TELEVISION CAMERA(for Front) REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed, installed or replaced during the front television camera removal/installation are shown below.

Necessary Procedures after parts removed / installed / replaced
Replacement Part or Procedure Necessary Procedures Effects / Inoperative when not Performed Link
Front bumper assembly (Including removal and installation)

  • Ultrasonic sensor detection angle

  • Ultrasonic sensor detection angle registration

 Parking support brake system

Click here

Front television camera assembly (Including removal and installation) Front television camera view adjustment Panoramic view monitor system

Click here

PROCEDURE


  1. REMOVE FRONT BUMPER ASSEMBLY


    1. except Sport Package:

      Click here

    2. for Sport Package:

      Click here

  2. REMOVE FRONT TELEVISION CAMERA ASSEMBLY


    1. except Sport Package:


      1. B004T8W

        Disconnect the connector and detach the clamp.

      2. B004XN2

        Remove the 2 screws.

      3. B004WWSC01
        B004RMI Remove in this Direction

        Detach the guide and remove the front television camera assembly.

    2. for Sport Package:


      1. B004RZP

        Disconnect the connector and detach the clamp.

      2. B004X4Y

        Remove the 2 screws.

      3. B004VSVC01
        B004RMI Remove in this Direction

        Detach the guide and remove the front television camera assembly.