| DTC Code | DTC Name |
|---|---|
| C1626 | Steering Angle Sensor Failure |
DESCRIPTION
This DTC is stored if the rear television camera assembly receives a signal via CAN communication from the steering sensor that indicates an internal malfunction.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| C1626 | Steering Angle Sensor Failure | A fail flag is transmitted from the steering sensor. |
|
CAUTION / NOTICE / HINT
When "!" mark is displayed on the multi-display after disconnecting the cable from the negative (-) auxiliary battery terminal, correct the steering angle neutral point.
Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system may be needed.
The vehicle is equipped with a Supplemental Restraint System (SRS) which includes components such as airbags. Before servicing (including removal or installation of parts), be sure to read the precaution for Supplemental Restraint System.
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.
PROCEDURE
CHECK FOR DTC
Clear the DTCs.
Check for DTCs.
| Result | ||||||
|---|---|---|---|---|---|---|
|
USE SIMULATION METHOD TO CHECKClick here
REPLACE STEERING SENSOR
Replace the steering sensor with a new or normally functioning one.
| Result | ||
|---|---|---|
|
CHECK FOR DTC
Clear the DTCs.
Check for DTCs.
| Result | ||||||
|---|---|---|---|---|---|---|
|
END (STEERING SENSOR IS DEFECTIVE)
REPLACE REAR TELEVISION CAMERA ASSEMBLYClick here