REAR LOWER ARM INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   TEMPORARILY TIGHTEN REAR NO. 2 SUSPENSION ARM ASSEMBLY LH

   
   
   1. 

      Insert the rear suspension arm attachment sub-assembly from the back of the vehicle. Then temporarily tighten the rear No. 2 suspension toe adjust plate and rear No. 2 suspension arm assembly LH with the nut.

   2. 

      Insert the bolt from the front of the vehicle. Then temporarily tighten the rear No. 2 suspension arm assembly LH with the washer and nut.

2. Click here

   TEMPORARILY TIGHTEN REAR STABILIZER LINK ASSEMBLY LH

   
   
   1. 

      Temporarily tighten the rear stabilizer link assembly LH to the rear No. 2 suspension arm assembly LH with the bolt and nut.

3. Click here

   CONNECT REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH

   
   
   1. 

      Install the rear height control sensor sub-assembly LH to the rear No. 2 suspension arm assembly LH with the bolt.

      5.4 N*m

      55 kgf*cm

      48 in.*lbf

4. Click here

   TEMPORARILY TIGHTEN LOWER CONTROL ARM ASSEMBLY LH

   
   
   1. 

      	Bolt
      	Nut

      Insert the bolt from the back of the vehicle. Then temporarily tighten the lower control arm assembly LH with the nut.

   2. 

      Temporarily tighten the lower control arm assembly LH with a new nut.

5. Click here

   STABILIZE SUSPENSION

   Click here

6. Click here

   FULLY TIGHTEN LOWER CONTROL ARM ASSEMBLY LH

   
   
   1. 

      	Bolt
      	Nut

      Fully tighten the lower control arm assembly LH with the bolt.

      126 N*m

      1285 kgf*cm

      93 ft.*lbf

      Note:

      Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.

   2. 

      Fully tighten the nut.

      118 N*m

      1203 kgf*cm

      87 ft.*lbf

7. Click here

   FULLY TIGHTEN REAR NO. 2 SUSPENSION ARM ASSEMBLY LH

   
   
   1. 

      Fully tighten the rear No. 2 suspension arm assembly LH with the nut.

      213 N*m

      2172 kgf*cm

      157 ft.*lbf

   2. 

      Fully tighten the nut.

      165 N*m

      1683 kgf*cm

      122 ft.*lbf

8. Click here

   FULLY TIGHTEN REAR STABILIZER LINK ASSEMBLY LH

   
   
   1. 

      Fully tighten the nut.

      24 N*m

      245 kgf*cm

      18 ft.*lbf

9. Click here

   INSTALL NO. 2 DIFFERENTIAL SUPPORT PROTECTOR

   Click here

10. Click here

    INSTALL REAR WHEEL

    Click here

11. Click here

    INSPECT AND ADJUST REAR WHEEL ALIGNMENT

    Click here

12. Click here

    INSPECT AND ADJUST VEHICLE HEIGHT (w/ Air Suspension)

    Click here

13. Click here

    PERFORM INITIALIZATION

    Parking support brake system	Click here
    Panoramic view monitor system	Click here
    Parking assist monitor system	Click here
    w/ Dynamic Rear Steering System: Dynamic rear steering system	Click here
    w/o Air Suspension System: Automatic headlight beam level control system	Click here

14. Click here

    ADJUST HEADLIGHT AIMING

    Click here