SUB RADIATOR REMOVAL

PROCEDURE

1. Click here

   AIR SUSPENSION CONTROL PROHIBITED (w/ Air Suspension)

   Click here

2. Click here

   REMOVE UPPER RADIATOR SUPPORT SEAL

   Click here

3. Click here

   REMOVE RADIATOR COVER PLATE

   Click here

4. Click here

   REMOVE LOWER RADIATOR AIR DEFLECTOR

   Click here

5. Click here

   DRAIN COOLANT (for Inverter)

   Click here

6. Click here

   REMOVE FRONT BUMPER

   
   

   • for Sport Package:

     Click here

   • except Sport Package:

     Click here

7. Click here

   REMOVE RADIATOR SUPPORT TO CROSSMEMBER BRACE SUB-ASSEMBLY LH

   Click here

8. Click here

   REMOVE RADIATOR SUPPORT TO CROSSMEMBER BRACE SUB-ASSEMBLY RH

   Click here

9. Click here

   REMOVE NO. 1 AIR CLEANER INLET

   Click here

10. Click here

    REMOVE LOWER ARM BRACKET BRACE SUB-ASSEMBLY LH

    Click here

11. Click here

    REMOVE LOWER ARM BRACKET BRACE SUB-ASSEMBLY RH

    Click here

12. Click here

    REMOVE HOOD LOCK RELEASE LEVER PROTECTOR

    Click here

13. Click here

    REMOVE HOOD LOCK ASSEMBLY

    Click here

14. Click here

    REMOVE HIGH PITCHED HORN ASSEMBLY

    Click here

15. Click here

    REMOVE LOW PITCHED HORN ASSEMBLY

    Click here

16. Click here

    DISCONNECT ENGINE ROOM MAIN WIRE

    Click here

17. Click here

    REMOVE HOOD LOCK CONTROL CABLE COVER LH (for LHD)

    Click here

18. Click here

    REMOVE HOOD LOCK CONTROL CABLE COVER RH

    Click here

19. Click here

    REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY

    Click here

20. Click here

    REMOVE RADIATOR ASSEMBLY (for Inverter Coolant)

    
    
    1. 

       *1	No. 2 Inverter Cooling Hose
       *2	No. 3 Inverter Cooling Hose

       Slide the 2 hose clips and disconnect the No. 2 inverter cooling hose and No. 3 inverter cooling hose from the radiator assembly.

    2. Remove the 2 bolts.

    3. Detach the 2 claws and remove the radiator assembly.

       Note:
       

       • Put pieces of cloth into the pipes and disconnected hoses or cover the pipes and hoses with plastic bags to prevent foreign matter from entering the radiator assembly and cooling system.

       • Do not apply excessive force to the No. 2 inverter cooling hose and No. 3 inverter cooling hose.