FRONT SEATBACK HEATER INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL FRONT SEATBACK HEATER (SEPARATE TYPE FRONT SEATBACK COVER) (for Standard Seat Type)

    Tech Tips


    • When installing a separate type front seatback cover, refer to Precaution in order to prevent wrinkles from forming.

      Click here

    • The front seatback heater cannot be removed from the separate type front seatback cover as they are a unit.


    1. B005PZQN02

      Using hog ring pliers, install the front seatback heater (separate type front seatback cover) to the separate type front seatback pad with 12 new hog rings in the order indicated in the illustration.

      Note


      • Be careful not to damage the separate type front seatback cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.

  2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for Standard Seat Type)

    Click here

  3. INSTALL FRONT SEATBACK HEATER (FRONT SEATBACK PAD WITH COVER) (for Sports Seat Type)

    Tech Tips

    The front seatback heater cannot be removed from the front seatback pad with cover as they are a unit.


    1. Install the front seatback heater (front seatback pad with cover).

    2. B005MWGC01
      *a Bracket

      Engage the 2 brackets and install the 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      Note


      • For vehicles with a front seat airbag assembly, the front seatback pad with cover must be securely installed. Otherwise, the front seat airbag assembly may not deploy properly.

      • Make sure that the strap is not twisted after installing the nut.

      • Install the brackets securely.

  4. INSTALL FRONT SEAT HEADREST SUPPORT

    Click here

  5. INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY

    Click here

  6. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY

    Click here

  7. INSTALL FRONT SEAT INNER CUSHION SHIELD

    Click here

  8. INSTALL INNER NO. 1 FRONT SEAT CUSHION SHIELD (for Standard Seat Type)

    Click here

  9. INSTALL FRONT SEAT CUSHION SHIELD (for Standard Seat Type)

    Click here

  10. INSTALL FRONT SEAT CUSHION SHIELD (for Sports Seat Type)

    Click here

  11. INSTALL INNER NO. 1 FRONT SEAT CUSHION SHIELD (for Sports Seat Type)

    Click here

  12. CONNECT FRONT SEATBACK BOARD SUB-ASSEMBLY

    Click here

  13. INSTALL FRONT SEAT ASSEMBLY

    Click here