ENGINE SWITCH REMOVAL

PROCEDURE

1. PRECAUTION

   Note

   After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Click here.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

3. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (for Radio Receiver Type)

   Click here

4. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (for Navigation Receiver Type)

   Click here

5. REMOVE FRONT DOOR SCUFF PLATE LH

   Click here

6. REMOVE COWL SIDE TRIM BOARD LH

   Click here

7. REMOVE FRONT DOOR OPENING TRIM COVER LH

   Click here

8. REMOVE INSTRUMENT SIDE PANEL LH

   Click here

9. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

   Click here

10. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

11. REMOVE SWITCH BASE

    Click here

12. REMOVE ENGINE SWITCH

    
    

    1. Disengage the 2 claws and remove the engine switch.

       

       Text in Illustration

       *A

       for LHD

       *B

       for RHD