FUEL INJECTOR INSTALLATION

PROCEDURE


  1. INSTALL FUEL INJECTOR ASSEMBLY

    Tech Tips

    Perform "Inspection After Repair" after replacing the fuel injector assembly Click here.


    1. B001NTKE09
      Text in Illustration
      *1 O-ring

      Apply a light coat of spindle oil or gasoline to new O-rings, and install them to each fuel injector assembly.

    2. B001O9CE04
      Text in Illustration
      *a Turn
      B001O8N Push

      Apply a light coat of spindle oil or gasoline where the fuel delivery pipe contacts each O-ring.

    3. Push and twist each fuel injector assembly to install it into the fuel delivery pipe sub-assembly.

    4. Position each fuel injector connector outward.

      Note


      • Be careful not to twist the O-rings.

      • After installing a fuel injector assembly, check that it turns smoothly. If not, reinstall it with a new O-ring.

  2. INSTALL FUEL DELIVERY PIPE SUB-ASSEMBLY


    1. Install 6 new injector vibration insulators to the intake manifold.

    2. Place the fuel delivery pipe sub-assembly with the 6 fuel injector assemblies in position on the intake manifold.

      Note

      Be careful not to drop the fuel injector assemblies when installing the fuel delivery pipe sub-assembly.

    3. B001OB6

      Temporarily install the 5 bolts which are used to hold the fuel delivery pipe sub-assembly to the intake manifold.

      Note

      After installing the fuel injector assemblies, check that they turn smoothly. If not, reinstall them with new O-rings.

    4. Tighten the 5 bolts which are used to hold the fuel delivery pipe sub-assembly to the intake manifold.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

    5. Connect the 6 fuel injector connectors.

  3. CONNECT FUEL TUBE SUB-ASSEMBLY


    1. B001O9PE04
      Text in Illustration
      *1 No. 2 Fuel Pipe Clamp
      *2 Retainer
      *3 Fuel Tube Connector
      *4 O-ring
      *5 Fuel Pipe
      B001O8N Push

      Push in the fuel tube connector onto the fuel pipe until the fuel tube connector makes a "click" sound.

      Note


      • Before connecting the fuel tube connector and fuel pipe, check that there is no damage or foreign matter on the connecting part of the fuel pipe.

      • After connecting the fuel tube connector and fuel pipe, check that they are securely connected by trying to pull them apart.

    2. Install the No. 2 fuel pipe clamp.

  4. INSTALL INTAKE AIR SURGE TANK ASSEMBLY

    Click here

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  6. INSPECT FOR FUEL LEAK

    Click here