ROOM TEMPERATURE SENSOR REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL

    Click here

  4. REMOVE FRONT DOOR SCUFF PLATE

    Click here

  5. REMOVE COWL SIDE TRIM BOARD

    Click here

  6. REMOVE FRONT DOOR OPENING TRIM COVER

    Click here

  7. REMOVE INSTRUMENT SIDE PANEL

    Click here

  8. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

    Click here

  9. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  10. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  11. REMOVE SWITCH BASE

    Click here

  12. REMOVE COOLER (ROOM TEMP. SENSOR) THERMISTOR


    1. B001OER

      Disengage the 2 claws.

    2. B001OMF

      Disconnect the connector and cooler thermistor hose, and remove the cooler (room temp. sensor) thermistor.