FRONT SEAT OUTER BELT ASSEMBLY REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Click here.

    Tech Tips


    • Use the same procedure for the RH side and LH side.

    • The following procedure is for the LH side.

  2. REMOVE SEAT BELT ANCHOR COVER CAP


    1. B001OA4

      Disengage the 6 guides and remove the seat belt anchor cover cap.

    2. Operate the power seat switch assembly and move the front seat assembly so that the nut for the anchor of the front seat outer belt assembly can be removed.

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY


    1. B001OQ9

      Remove the nut and disconnect the anchor of the front seat outer belt assembly.

  5. REMOVE FRONT DOOR SCUFF PLATE

    Click here

  6. REMOVE REAR DOOR SCUFF PLATE

    Click here

  7. REMOVE CENTER PILLAR LOWER GARNISH

    Click here

  8. REMOVE CENTER PILLAR UPPER GARNISH

    Click here

  9. REMOVE FRONT SEAT OUTER BELT ASSEMBLY


    1. B001OLO

      Remove the nut and disconnect the shoulder anchor of the front seat outer belt assembly.

    2. B001OIME06
      Text in Illustration
      *a Protective Tape
      *b Pretensioner Connector

      Using a screwdriver, pull out the locking button in the direction shown by the arrow in the illustration to release the lock, and disconnect the pretensioner connector as shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

    3. Disconnect the connector.

    4. B001NVM

      Remove the 2 bolts and front seat outer belt assembly.

  10. REMOVE FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY


    1. B001NVU

      Remove the 2 bolts.

    2. Disengage the guide and remove the front shoulder belt anchor adjuster assembly.