PARKING SUPPORT BRAKE SYSTEM, Diagnostic DTC:C2A63

DTC Code DTC Name
C2A63 Back Camera Internal Circuit

DESCRIPTION

This DTC is stored when the clearance warning ECU assembly detects a signal indicating a malfunction in the rear television camera assembly via CAN communication.

DTC No. Detection Item DTC Detection Condition Trouble Area
C2A63 Back Camera Internal Circuit A signal indicating a malfunction in the rear television camera assembly is detected. Rear television camera assembly

CAUTION / NOTICE / HINT

Note


  • After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click here

  • After replacing an ultrasonic sensor or the clearance warning ECU assembly, perform the necessary procedures (adjustment, calibration, initialization or registration).

    Click here

PROCEDURE


  1. CHECK FOR DTC


    1. Clear the DTCs.

      Click here


      Body Electrical > IPA/ICS/Clearance Sonar > Clear DTCs

    2. Check for DTCs.

      Click here


      Body Electrical > IPA/ICS/Clearance Sonar > Trouble Codes
      OK
      DTC C2A63 is not output.
      Result
      Proceed to
      OK
      NG

    OK

    USE SIMULATION METHOD TO CHECK Click here

    NG

    REPLACE REAR TELEVISION CAMERA ASSEMBLY Click here