CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
There is risk of injury.
Tech Tips
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
PROCEDURE
INSTALL SEAT COVER WIRE
INSTALL SEPARATE TYPE REAR SEATBACK COVER LH
Tech Tips
When installing a separate type rear seatback cover, refer to Precaution in order to prevent wrinkles from forming.
Set the separate type rear seatback cover LH to the separate type rear seatback pad LH.
| *a | Hog Ring Pliers |
Using hog ring pliers, install the separate type rear seatback cover LH to the separate type rear seatback pad LH with 10 new hog rings in the order indicated in the illustration.
Note
Be careful not to damage the separate type rear seatback cover LH.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seatback cover LH.
Pass the strap and bracket of the separate type rear seatback cover LH through the hole of the separate type rear seatback pad LH.
INSTALL SEPARATE TYPE REAR SEATBACK COVER RH
Tech Tips
Use the same procedure described for the LH side.
INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD LH
INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD RH
Tech Tips
Use the same procedure described for the LH side.
INSTALL REAR NO. 2 SEAT HEADREST ADJUSTER SUB-ASSEMBLY
INSTALL REAR NO. 1 SEAT HEADREST ADJUSTER SUB-ASSEMBLY
Tech Tips
Use the same procedure described for the rear No. 2 seat headrest adjuster sub-assembly.
INSTALL REAR SEATBACK MAIN FRAME SUB-ASSEMBLY LH
INSTALL REAR SEATBACK MAIN FRAME SUB-ASSEMBLY RH
Tech Tips
Use the same procedure described for the LH side.
INSTALL LUMBER SUPPORT PUMP SUB-ASSEMBLY LH
INSTALL LUMBER SUPPORT PUMP SUB-ASSEMBLY RH
Tech Tips
Use the same procedure described for the LH side.
INSTALL REAR SEAT WIRE LH
INSTALL REAR SEAT WIRE RH
Tech Tips
Use the same procedure described for the LH side.
INSTALL SEATBACK CHECK VALVE WITH BRACKET LH
INSTALL SEATBACK CHECK VALVE WITH BRACKET RH
Tech Tips
Use the same procedure described for the LH side.
INSTALL REAR SEAT HEADREST SUPPORT
INSTALL REAR SEAT HEADREST ASSEMBLY LH
INSTALL REAR SEAT HEADREST ASSEMBLY RH
Tech Tips
Use the same procedure described for the LH side.
INSTALL NO. 2 SEATBACK CHECK VALVE WITH HOSE LH (w/ Refresh Seat)
INSTALL NO. 2 SEATBACK CHECK VALVE WITH HOSE RH (w/ Refresh Seat)
Tech Tips
Use the same procedure described for the LH side.
INSTALL NO. 1 SEATBACK CHECK VALVE WITH HOSE LH (w/ Refresh Seat)
INSTALL NO. 1 SEATBACK CHECK VALVE WITH HOSE RH (w/ Refresh Seat)
Tech Tips
Use the same procedure described for the LH side.
INSTALL REAR SEATBACK ASSEMBLY LH
INSTALL REAR SEATBACK ASSEMBLY RH
INSTALL REAR SEAT CUSHION LOCK HOOK
INSTALL REAR SEAT CUSHION ASSEMBLY LH
INSTALL REAR SEAT CUSHION ASSEMBLY RH
Tech Tips
Use the same procedure described for the LH side.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
for 8GR-FKS:
for V35A-FTS:
INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY
PERFORM DIAGNOSTIC SYSTEM CHECK
CHECK SRS WARNING LIGHT
INSPECT SEAT BELT WARNING SYSTEM
w/ Occupant Classification System:
w/o Occupant Classification System:
INSPECT REAR SEAT ASSEMBLY
INSPECT SEAT HEATER SYSTEM
INSPECT CLIMATE CONTROL SEAT SYSTEM